Debian Hardware :: Non Functional Touchpad In Squeeze?
Nov 6, 2010
I am very eager to get two-finger scrolling in my acer 5740, but the big issue is my touchpad is not fully functional
"xinput llist" already detects the touchpad as
SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
The xorg log shows dual loading of touchpad driver
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[Code]...
But still after completely removing the xorg log and restarting the X, the log reports as
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
"synclient -l" though shows a long list of already set values, the touchpad is not working properly. How can I prevent this dual loading of drivers ? Kindly enlighten me , so that I can have a properly working touchpad. If any more info is required, then please ask me. There is no xorg.conf. I tried to generate one by "Xorg :1 -configure", but the generated file did not have any section related to touchpad.
View 2 Replies
ADVERTISEMENT
Jan 22, 2011
After upgrading my Acer extenza 5620z to debian squeeze(kernel 2.6.32-bpo.5-686) left click was not working on my SynPS/2 Synaptics TouchPad,allthought moving the cursor was working !
I went to debian channel on irc and there was someone who told that I should install a patch [URL] to correct this problem but when I restarted the whole touchpad was not working !!
Here is the output of dmesg [URL]
View 14 Replies
View Related
Jul 26, 2010
I just tried Software Center on my freshly installed Testing, but it does not work: when I click on Install it turns gray and nothing happens. How can I make this application functional?
View 14 Replies
View Related
Nov 16, 2010
How can I implement this: I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off.
I'm going to do the installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 4 Replies
View Related
May 8, 2012
I just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies
View Related
Sep 6, 2010
Trying to upgrade the following packages in Squeeze: apt apt-utils aptitude libept1 python-apt synaptic
The output terminal gets hung up with this message: WARNING: terminal is not fully functional /tmp/tmp9PEsnI (press RETURN)
After pressing RETURN:
apt (0.7.26-exp3) experimental; urgency=low
* apt-ftparchive now reads the standard configuration files in
/etc/apt/apt.conf and /etc/apt/apt.conf.d
[code].....
View 4 Replies
View Related
Jan 29, 2010
My Debian System GUI (Gnome desktop) is not functional (which means I can't take snapshots of the codes, use openofice, edit photos, watch movies and am using a different computer) after I installed updates when I was notified about updates by the "system notifier icon".
The "hal" package is broken, and the GDM informs, after unsuccessfully trying to boot the GUI thrice, that kbd, nvidia and x11
View 1 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
May 7, 2010
I am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.
View 2 Replies
View Related
Apr 22, 2010
I have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.
View 1 Replies
View Related
Aug 27, 2010
I couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place
I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.
Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.
The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons
I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5
I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices
Which gives:
Code:
View 5 Replies
View Related
Jan 2, 2011
I have posted questions on several Linux forums that asked how I could turn off the touchpad on my new EEE-900A netbook. There is a backstory that is not that relevant, but in a nutshell, I got this tiny low-power computer to be my voice since my speech is impaired. Only the latest Debian has the tools I needed.
After much searching, suggested that I remove the touchpad driver; the command as root: # rmmod psmouse
Did the trick. On the 900A, the protocol that handles the touchpad is the PS/2. Removing the psmouse driver module does not affect my USB mouse, so now I can use my USB mouse and type away with my left hand and bumping into the touchpad doesn't screw things up. In other words: Success. (I am being as explicit as possible so that all search engines will find this.
View 1 Replies
View Related
Jan 24, 2011
I running acer aspire 5742 64bits intel core i3 is there a way to disable the touchpad cause is bugging me.
View 13 Replies
View Related
Jun 14, 2010
My touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
View 1 Replies
View Related
Aug 22, 2015
Ive installed debian 8 with a usb stick , without internet connection.
My touch pad configuration is quite strange : i cannot right-click and also i cannot select text (which normaly is done by pressing leftclick and moving the other finger). can
Instead i can right-click by tapping with 2 fingers at once , but still the problem of selecting text bugs me.
Ive google-d alot but there seems to be no GUI for solving my problem or none that i know how to install.
EDIT : ive googled a little more and i found how to do it , just Press with 1 finger and dont up it until youve selected the text , however that doesent let me select large pages, like 2 pages size because i cannot scroll enough
View 12 Replies
View Related
Nov 27, 2010
Since last Saturday (11-20) my touchpad enable/disable key stopped working.I don't make much use of the touchpad and it usually stays disabled most of the time so I can't be sure it is really on Saturday that I lost this functionality or maybe the day before (I'm positive it's not longer than that).Before that it worked flawlessly, now it's like a dead key (which is not broken by the way, tested on a live CD).In these past week I have been looking for quite some time for other users who might have experienced this problem after the update of two specific packages (console-data and keyboard-configuration) I had on the 20th and which made me think might have broken the key binding.Not finding anything at all and after having tried for said packages both newer versions from sid and previous known-to-have-worked-before versions from the install CD, I started thinking the problem was not there (I consequently restored the testing ones).
The days before this happened I tinkered a little bit with gpointing-device-settings and tpconfig (this last one was a simple tpconfig -i), but at this point I start thinking there might have been something else I've done, somewhere else I can't recall probably.
Oh, I forgot to mention that the touchpad still works flawlessly, I can enable/disable it through gconf (actually I made two handy shortcut to the "/desktop/gnome/peripherals/touchpad/touchpad_enabled" value), so it is not an issue of making it work, just the toggle key which on my laptop is a dedicated one (no Fn modifier) and anyway all the other special keys still work fine.I checked gnome-keybinding-properties and there is no action for the touchpad there, but I don't know for sure if there was one before (and I haven't been able to add one). Anyway in gconf I noticed a key in "/apps/gnome_settings_daemon/keybindings/touchpad" has the value "XF86TouchpadToggle", not sure if that means the keybinding exists or what.
What more can I add? What I'm here to ask now is some guidance on figuring out what I might have done wrong considering what I was able to tell you, but mostly, considering what I wasn't able to tell you and am not even aware to have done.
View 6 Replies
View Related
Apr 5, 2011
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
View 1 Replies
View Related
Nov 7, 2015
Im totally new on linux, I installed Debian 8, but I dont know how to make my touchpad to work properly. I have ASUS X555LN with focaltech touchpad, its working but just draging mouse and pressing touchpad, no scroll with two fingers and no touch to select. On windows was working everything fine with asus smart gesture but this is diferent world
View 3 Replies
View Related
Nov 28, 2015
My touchpad stopped working, most likely I have accidentally turned it off by some Fn-key combination (Fn-F4 on my laptop). Since then I was unable to turn it back again. What I've tried:
0. Same keycombo does not work. Actually, when checking with xev, Fn-F4 does not even toogle any KeymapNotify event. Some other Fn-combos result in KeymapNotify (e.g. screen brightness), some others (e.g. keyboard backlight) do not give event, but still do what they should do, and finally some do not do anything
1. Total power-off, also removing battery. This has usually solved touchpad problems on my other Fujitsu laptop, but not on this.
2. Checked xinput: it says, that touchpad is enabled
3. Also tried this trick: adding "options psmouse proto=imps" to appropriate config file. [URL] ....
4. Further playaround with psmouse, as described here:[URL] ....
Laptop type: Fujitsu S935
uname -r: 4.2.0-1-amd64
I'm using MATE 1.10.2
View 6 Replies
View Related
May 29, 2010
I have installed Debian Testing, which didn't crashed...yet. But I have another problem. I am on a ASUS Laptop, with Elantech touchpad, which doesn't work. The bigger program is that the FN key from my laptop is not recognized too. I am a bit angry because it was working, it is working on live CDs, was working on yesterday's Debian, same version, same CD, nothing changed. I've followed these methods, but no success: [URL]
View 1 Replies
View Related
Apr 16, 2011
I am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
View 2 Replies
View Related
Mar 21, 2011
Installed Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 Replies
View Related
Nov 2, 2010
I am trying to make it work in a fresh Squeeze install. After installation, only the left mouse works. It seems mouse driver and not synaptics is loaded. I checked the package manager and saw xserver-xorg-input-synaptics packaged installed.
How do I load the synaptics driver and how do I verify I have it? I would like to make sure that before playing with the options.
View 14 Replies
View Related
May 14, 2010
Install Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies
View Related
May 1, 2010
I have an EeePC 1000HA with Debian squeeze, and I can't seem to find the option to enable touchpad tapping. Is there a certain config file for the synaptics-touchpad driver I need to edit?
View 6 Replies
View Related
May 27, 2011
I have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
View 2 Replies
View Related
Jun 20, 2015
I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
View 2 Replies
View Related
May 5, 2010
I tried to inactivate my touchpad during typing in order to avoid the curser jumping all the time due to accicentally hitting the pad.
The touchpad however worked from intallation on,without problems. Even two finger scrolling is supported perfectly. All attempts that I found in searching the internet rely on changes in the xorg.conf. I found out that it is quite normal to not have this file with debian squeeze, however I didn't find a solution how to change the configurations without it.
$ syndaemon -d -k
gives
> Unable to find a synaptics device
[code].....
View 4 Replies
View Related
Sep 7, 2011
I'm trying to setup X on an old netbook to act kinda like a small backup server for a few VPS servers i own, Anyway so i decided to install X + openbox + Other Programs together to create a basic desktop that i could vnc into if i wish or could use from the main box.
(Heres the problem)
When X starts it says it cannot queary the touchpad and when X loads i have no mouse. The first few times i started X I had no problems. I've looked on a few websites but i cant seem to get the touchpad to work again, Any Ideas?
X Error:
Touchpad:
View 2 Replies
View Related
Feb 4, 2014
I had a question about how to configure wheezy 7.2 on a laptop with a Synaptics touchpad. As installed, the touchpad is recognized; I can move the mouse pointer with it, and even scroll vertically with the touchpad's scroll strip. However, it won't let me tap or double-tap on the pad to emulate mouse clicks, like I can in other OSes. I am running the LXDE desktop on Debian Wheezy 7.2.
And, there is no configuration that I can find for the Synaptics touchpad in the default setup; I looked all through the menus.
So far, I've tried a few suggestions I've found while searching. I installed a GUI-based config program called "GPointing Device Settings", and *some* of the settings in that program seem to work with the Synaptics touchpad, but others, like the tapping settings, don't.
One point of confusion for me is that some of the solutions I've seen mention a folder /etc/X11/xorg.conf.d/synaptics.conf; however, on my system, there is no xorg.conf.d folder underneath /etc/X11, and in fact, I can't find that folder anywhere on the system. The page I was looking at is here: [URL] .... does LXDE use a different X setup than other desktop environments?
View 4 Replies
View Related
