I installed Debian (8.2.0) on Virtualbox and I always get the error message :
Is the system affected by the error messages? What does the messages mean? And how do I get rid of it?
I learned that, even while on Linux, using Iceweasel/Firefox 3.0.6 is not safe. So I tried to update the browser for my PPC G4 iMac (256 MB RAM, 800 MHz processor).
1. I downloaded a backported Iceweasel .deb from URL...
2. I then tried to install it with dpkg -i PathToIceweasel.deb
3. There was an error. I remember seeing xulrunner-1.9.1 is not installed. I tried to install that with apt-get but it was not available.
4. Now when I click on web browser I get the error "Failed to execute default Web Browser: Input/Output error".
5. What can I do without having to reinstall?
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
I just upgraded from wheezy 7.2.0 to jessie 8.2.0 . I am still running sys v init.
I cannot run bluetooth because bluetoothd dies with the error "Failed to access management interface"
Code: Select allllewelly@zorthluthik:~$ sudo /etc/init.d/bluetooth start
Starting bluetooth: bluetoothd.
llewelly@zorthluthik:~$ sudo /etc/init.d/bluetooth status
bluetooth is not running ... failed!
llewelly@zorthluthik:~$ sudo /usr/lib/bluetooth/bluetoothd -n
bluetoothd[3736]: Bluetooth daemon 5.23
[Code] ....
All of the above worked fine before I upgraded.
Here is the bluetooth device section from lsusb -v :
Code: Select allBus 001 Device 003: ID 8087:07da Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
[Code] ....
explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies View RelatedI am trying to copy a CDR file from cisco CDR to my vsftpd on Debian but I am getting this error on the Cisco PBX: [URL] ....
View 3 Replies View RelatedI have now tried twice, with the same results, to install Debian 8.2.0 onto my hard drive. Each time it went through the installation as if everything was working. But, when it rebooted, it came up in grub rescue mode. When I do an "ls" command, it only shows the hard drive and no partition information. When I do an "ls (ho0,1)" it reports no such partition.
When is my installation failing? Why is it not partitioning the hard drive and loading the OS? Obviously it can write to the disk or else grub wouldn't come up at boot.
I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
I'm trying to install Debian 5.03 from the netinstall on a usb flash disk. When it gets to the network initialization step, it fails and cannot get an IP from DHCP. Manual configuration does not work either. Out of desperation I installed windows to see if the network device was broken (this is a new motherboard), however it works fine without drivers even. Invoking lspci shows that it is a Realtek RTL8111/8168B PCI Express Gigabit Etherent Controller (revision ff)
View 4 Replies View RelatedWhen I was trying to install debian stable in my laptop the process was freeze, I would like to know what was the problem, this is very important for me because the failed would be in a working server or on a project, so my questions are:
1. What are the places/files to look for errors? log files? dmesg? something else?
2. Are there some special commands or routines that can help in the analysis?
I'm trying to install stable Squeeze from HD "!! Scan hard drives for an installer ISO image. The quick scan for installer ISO images, which look only in common places, did not find an installer ISO image, but it may take a long time. Do full search for installer iSO image? [YEs} No kernel modules were found. This probably is due to a mismatch between the kernel Version available in the archive If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules"
[Code]....
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
I just recently downloaded debian 8.2 live cd 64bit amd and wrote it to a usb stick with the universal usb installer from [URL] ..... The installer stops at the point of grabbing information from CD (right after choosing location) and since I have no dvd drive installed it spits an error out at me.
Now it seems to load the files right with the install icon from within the live mode but it gets cut off so I can't see about 1/3 the screens info. 4k monitor problems?
A bit of info, Installing on a Asus Maximus VIII Hero motherboard with ddr4, i7 6700k, win10 installed.
I'm rather new to UEFI bios options coming from a 2009/2010 x58 board, so I have a bit more reading to do.
Where to get working debian file that allows installation from the main initial boot menu.
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
I have tried to create a deb package, but It failed because I was missing some dependencies Now I have installed the dependenci and want to recreate the package (or try to), but get the following error.
rm -f sites-enabled/inner-tunnel sites-enabled/default
rmdir: failed to remove `sites-enabled': No such file or directory
make[3]: *** [clean] Error 1
make[3]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg/raddb'
make[2]: *** [common] Error 2
make[2]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make[1]: *** [clean] Error 2
make[1]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make: *** [clean] Error 2
How do I fix this, without starting from scratch ?
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5
Model Identifier:PowerMac7,3
Processor Name:PowerPC G5 (3.0)
Processor Speed:2 GHz
Number Of CPUs:2
L2 Cache (per CPU):512 KB
Memory:1.5 GB
Bus Speed:1 GHz
Boot ROM Version:5.2.4f1
I have done a update from Lenny to Squeeze with the update manager within Gnome. And there was a error 126 and the update broke off leaving me with a non working system. The system does start into Debian Squeeze to the command line. Users are in place and a login is possible. X does not work and there a lot of broken and defect packages. I want to repair my system. Is a restore without losing the configuration possible?
View 14 Replies View RelatedI just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage
Specs:
Dell dimension 600Mhz/384M RAM/10G HDD
ATI RAGE pro 128
Any pointers on what should I do?
I try to install linux on hpc mini. Let's crack some keyboards. I have just bought a new pc: hpc mini compaq! I find windows Xp rather fine; but let's try linux. The PC has no cdrom, so, I cannot boot from any ISO of debian. I choosed testing netinstall, and followed the how to given on the debian website from another PC using knoppix iso cdrom. I did placed five files as shown here onto my pendrive as followed in one howto: I found 5 files for testing:
Code:
debian-testing-i386-businesscard.iso initrd.gz vmlinuz
and
Code:
26644480 Aug 28 17:44 ../squeeze-debian-testing-i386-businesscard.iso
with :
[Code]....
I upgraded from deb7 to deb8, but am no longer able to boot. After passing the grub boot menu, the following messages are displayed:
Code:
Select allLoading, please wait...
[ 6.065713] systemd-fsck[148]: /dev/sda1: clean, 428644/1310720 files, 410616
9/52442880 blocks
[ 7.480551] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.692700] systemd-fsck[341]: /dev/sda5: clean, 145485/6176768 files, 17407409/24695552 blocks
[ 18.066215] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead
_
The screen then clears and an underscore is displayed as the sole character at the top left position of the screen. The system hangs at this point. During installation, I rejected two changed files: /etc/init.d/bootlogd and /etc/libreoffice/sofficerc. For both, I opted to keep the installed version (the default choice of the installer) rather than replacing with the new version. The first might be related to the problem, although it seems to be responsible only for logging the boot process, and I would not expect this to compromise booting.
In case this information is useful, sda1 is mounted at /, sda2 is swap space, sda3 is extended, and sda5 is a logical partition mounted at /home.
I am able to boot into rescue mode, but other than that the system is not usable. Unfortunately, no useful error messages are given to aid in diagnosing the problem.
Router works fine, debian refuses to work with it. I continued the install anyway but only have the first DVD so now I've got a useless base install that can't connect to the internet.
The fact that this installer has utterly failed where the others succeeded had drastically reduced my confidence in the debian team.
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
I'am using Ubuntu 10.10, and wish to install a Debian OS.I downloaded the file "debian-6.0.1a-amd64-netinst.iso.(My motherboard is a 945CG-F7 with INTEL PENTIUM DUAL CPU E2160)I recorded the file on CD as "iso" (following instructions from Internet).Grub tried to read the CD but than started Ubuntu OS.
View 2 Replies View RelatedBooting up fails with code 126. I am greeted with the following error everyime I start up.
Checking root file system.../etc/rcS.d/S10checkroot.sh: line 174: /sbin/logsave: Permission denied
failed (code 126).
It then says an automatic fsck failed and a manual fsck must be performed, then the system restarted. I have done a manual fsck and it did nothing. I booted up the system with knoppix and did it, nothing.
I've upgraded my squeeze box to linux kernel 2.6.32-5. But it shows mounting "here is the uuid of / " on /root failed: Device or resource busy while booting.Here is the menuentry of linux kernel 2.6.32-5.
[code]....
fakeroot debian/rules clean dh clean dh_testdir i met error after "debuild -S", did anybody meet the same issue?
[Code]...
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
I have created ftp user in vsftpd.
I want to know how can I allow it to access the home/documents directory as all files will be hosted there in the same directory and its subdirectories?
My ftp user name is mesk...