Debian Installation :: HD Failed To Partition
Sep 27, 2015
I have now tried twice, with the same results, to install Debian 8.2.0 onto my hard drive. Each time it went through the installation as if everything was working. But, when it rebooted, it came up in grub rescue mode. When I do an "ls" command, it only shows the hard drive and no partition information. When I do an "ls (ho0,1)" it reports no such partition.
When is my installation failing? Why is it not partitioning the hard drive and loading the OS? Obviously it can write to the disk or else grub wouldn't come up at boot.
View 1 Replies
ADVERTISEMENT
Mar 23, 2010
I have 9.10 installed and working like a charm, due to the problems I had last time, I decided to leave an empty space to try and test upcoming editions, but I can't install it!
I get two error messages and can't get past the point of partition assignment.
Here's the screenshots. I'm trying to install on the free space.
View 3 Replies
View Related
Jul 16, 2010
The ext4 file system creation in partition #1 of Serial ATA RAID isw_fjidifbhi_Volume0 (mirror) failed. Not sure what's wrong? How do I solve this? This happens after I enter my login details and click next. Then it fails on the install screen with this error.
View 2 Replies
View Related
Nov 26, 2010
I was updating from 10.04 to 10.10 earlier today when my laptop shutoff in the middle. I fixed a grub error by reinstalling it with a live-cd, and found out I had a "kernel panic-not syncing: VFS: unable to mount root fs on" waiting for me. I booted an alternative kernel and tried fixing things from there, but got "general error mounting filesystem". So, I tried a live-cd and when I mount the partition, it is read-only. I tried running fcsk to no availThe only thing I could find helpful was this."It's probably because your filesystem has suffered a failure - it is configured by default (in /etc/fstab) to remount as read-only in such cases in order to minimise the risk of data loss."
View 9 Replies
View Related
Jan 25, 2011
I have installed a dozen dual boot XP / Ubuntu boxes, however this one has me stumped. After the installation failed in the partitioning phase I tried manually partitioning which also failed. Then I went to using a Gparted LiveCD. I can resize the NTFS partition fine each time rebooting in XP and it is OK. However when I shrink the NTFS then try to add an ext4 (or ext3) right after the NTFS it acts like it is working, then when it says "complete" the disk disappears out of Gparted and it shows no devices. If I reboot into the LiveCD it shows a blank second partition, if I try to format it in ext4 I get the exact same results. If I go to Windows it will show an unknown healthy partition. If I grow the NTFS back to the full 60Gb it seems to work fine. It just won't create a second primary ext4 partition.
View 1 Replies
View Related
Feb 11, 2011
I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.
Tried to put WinXP on it just because I was that frustrated, no luck.
Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.
No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.
Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.
View 1 Replies
View Related
Jan 7, 2010
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
View 5 Replies
View Related
Jan 17, 2015
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
View 5 Replies
View Related
Oct 10, 2010
I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
View 2 Replies
View Related
Mar 27, 2010
I want to change my sda2 partition to ntfs type. i have installed GParted but it is returning a strange type of error. Here is the error dump file...
[Code]...
WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot. WARNING: the kernel failed to re-read the partition table on /dev/sda (Device or resource busy). As a result, it may not reflect all of your changes until after reboot.
View 9 Replies
View Related
Oct 15, 2010
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
View 6 Replies
View Related
Aug 1, 2010
explain the following issue I have with Debian IA 64:I tried on a PC (Mobo Gigabyte G41M-ES2H, core 2 duo, 4 GB RAM DDR2) the live CD of Debian Lenny IA64 and everything worked just fine, which was a very good thing because none of all other major ia64/i386 distros of Linux (Mandrake, ubuntu, fedora) did so. In a nutshell it seems that the IGP G41 chipset is the cause of these setup failure (Everything is OK when using a PCI-e graphic card that I need in another computer)rd as someone (viewtopic.php?=17&t=49186&p=282839&hilit=G41M+ES2H#p282839) successfully installed Lenny on a very similar mobo. To go to the point what I do not understand is when I launch the iso Cd to now install the same version of Debian, everything freezes at the very beginning of the boot and the screen goes blank.
View 4 Replies
View Related
Sep 28, 2014
I am trying to copy a CDR file from cisco CDR to my vsftpd on Debian but I am getting this error on the Cisco PBX: [URL] ....
View 3 Replies
View Related
Sep 6, 2010
I have searched for answer to this question but cannot find one. I am trying to install ubuntu 8.04.2 on my Acer TravelMate 290 but when I get to the install stage I get the error message "the file system creation in partition 1 of sci1 (0,0,0) (sda) failed". I am dedicating the entire HD to ubuntu, no windows and no dual boot.
View 5 Replies
View Related
Sep 8, 2011
I'd like to learn it. So I installed lenny & grub2, after that win7, reconfigured grub2, upgraded to squeeze. All is fine, but I cant start working in Debian as I can work only in Windows. So I decided to use qemu to emulate win7 booting. I have sda1, sda2 for squeeze; sda3 and sda4 for win7. If I try "qemu /dev/sda3" I get disk read error. If I try "qemu /dev/sda" I have grub 2 boot screen and when continue booting win7 I get "Ramdisk device creation failed due to insufficient memory" (as screen on [UR:]). I tried to use m -1024 parameter and got screen with "Windows load files" and reboot to grub2 screen/
View 4 Replies
View Related
Aug 16, 2014
I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
View 5 Replies
View Related
Nov 23, 2014
I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.
But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows
I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device
View 2 Replies
View Related
Jan 20, 2010
I'm trying to install Debian 5.03 from the netinstall on a usb flash disk. When it gets to the network initialization step, it fails and cannot get an IP from DHCP. Manual configuration does not work either. Out of desperation I installed windows to see if the network device was broken (this is a new motherboard), however it works fine without drivers even. Invoking lspci shows that it is a Realtek RTL8111/8168B PCI Express Gigabit Etherent Controller (revision ff)
View 4 Replies
View Related
Mar 15, 2010
When I was trying to install debian stable in my laptop the process was freeze, I would like to know what was the problem, this is very important for me because the failed would be in a working server or on a project, so my questions are:
1. What are the places/files to look for errors? log files? dmesg? something else?
2. Are there some special commands or routines that can help in the analysis?
View 3 Replies
View Related
Feb 6, 2011
I'm trying to install stable Squeeze from HD "!! Scan hard drives for an installer ISO image. The quick scan for installer ISO images, which look only in common places, did not find an installer ISO image, but it may take a long time. Do full search for installer iSO image? [YEs} No kernel modules were found. This probably is due to a mismatch between the kernel Version available in the archive If you're installing from a mirror, you can work around this problem by choosing to install a different version of Debian. The install will probably fail to work if you continue without kernel modules"
[Code]....
View 1 Replies
View Related
May 27, 2011
I installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
View 4 Replies
View Related
Nov 23, 2014
I am installing Whezzy and the installer failed to install grub on the MBR of /dev/sda
My disks are
- /dev/sda : the flash drive with the debian ISO
- /dev/sbd : a small SSD for the / partition (sdb1)
- /dev/sdc + /dev/sdd : a software RAID-1 array with LVM for /home, ...
Grub fails to install on /dev/sda which makes sense since this is the flash drive containing the Debian ISO so no MBR.
I already tried to run grub-update manually on /dev/sdb (with chroot /target grub-install --no-floppy --force "/dev/sdb" ).
It works but the system is not directly bootable. I had access to a second PC to read the grub documentation so was able to boot and to fix my system but this is annoying.
Is it normal to see my flash drive as /dev/sda? Could it be that my flash drive is incorrectly detected as a HD?
Is there a way to force the installer to install grub on /dev/sdb?
View 2 Replies
View Related
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
View Related
Nov 18, 2015
I just recently downloaded debian 8.2 live cd 64bit amd and wrote it to a usb stick with the universal usb installer from [URL] ..... The installer stops at the point of grabbing information from CD (right after choosing location) and since I have no dvd drive installed it spits an error out at me.
Now it seems to load the files right with the install icon from within the live mode but it gets cut off so I can't see about 1/3 the screens info. 4k monitor problems?
A bit of info, Installing on a Asus Maximus VIII Hero motherboard with ddr4, i7 6700k, win10 installed.
I'm rather new to UEFI bios options coming from a 2009/2010 x58 board, so I have a bit more reading to do.
Where to get working debian file that allows installation from the main initial boot menu.
View 1 Replies
View Related
Dec 18, 2015
I installed Debian (8.2.0) on Virtualbox and I always get the error message :
Is the system affected by the error messages? What does the messages mean? And how do I get rid of it?
View 1 Replies
View Related
Feb 3, 2010
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
View 14 Replies
View Related
May 20, 2010
I have tried to create a deb package, but It failed because I was missing some dependencies Now I have installed the dependenci and want to recreate the package (or try to), but get the following error.
rm -f sites-enabled/inner-tunnel sites-enabled/default
rmdir: failed to remove `sites-enabled': No such file or directory
make[3]: *** [clean] Error 1
make[3]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg/raddb'
make[2]: *** [common] Error 2
make[2]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make[1]: *** [clean] Error 2
make[1]: Leaving directory `/root/src_freeradius/freeradius-2.0.4+dfsg'
make: *** [clean] Error 2
How do I fix this, without starting from scratch ?
View 1 Replies
View Related
Jul 15, 2010
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5
Model Identifier:PowerMac7,3
Processor Name:PowerPC G5 (3.0)
Processor Speed:2 GHz
Number Of CPUs:2
L2 Cache (per CPU):512 KB
Memory:1.5 GB
Bus Speed:1 GHz
Boot ROM Version:5.2.4f1
View 11 Replies
View Related
Dec 21, 2010
I have done a update from Lenny to Squeeze with the update manager within Gnome. And there was a error 126 and the update broke off leaving me with a non working system. The system does start into Debian Squeeze to the command line. Users are in place and a login is possible. X does not work and there a lot of broken and defect packages. I want to repair my system. Is a restore without losing the configuration possible?
View 14 Replies
View Related
Feb 11, 2011
I just upgraded to Debian 6.0 squeeze 32 bit XFCE from Ubuntu on my old Dell PC. Installation went well, however, i can't get into X windows after reboot, the screen just displays garbage
Specs:
Dell dimension 600Mhz/384M RAM/10G HDD
ATI RAGE pro 128
Any pointers on what should I do?
View 10 Replies
View Related
