Debian Installation :: Failed Install On HP / Blinking Cursor
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
ADVERTISEMENT
Apr 21, 2015
I'm thinking about switching to Debian from Ubuntu, so I installed Debian (debian-7.8.0-amd64-DVD-1) in dual boot with my Ubuntu 14.10 (Uefi install). Installation process was OK (I think), I got a working GRUB that recognizes both OS, but Debian boots to a blank screen with a flashing cursor in the top left corner (Ubuntu boots perfectly). I also ran into some graphics-related problems while installing/booting Ubuntu, due to my AMD GPU graphics, that I solved adding the nomodeset option to the kernel in GRUB, but that no longer seems to do the trick here. Here's some info about my machine:
HP Envy 15
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
[Code] ....
I don't know why they are listed as microsoft basic data.
View 9 Replies
View Related
Oct 31, 2013
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
View 5 Replies
View Related
Aug 28, 2011
I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
View 1 Replies
View Related
Jun 29, 2011
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
View 2 Replies
View Related
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Dec 16, 2010
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
View 9 Replies
View Related
Feb 5, 2010
I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!
I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).
View 1 Replies
View Related
Mar 11, 2011
1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.
Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L
[code]...
View 1 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
Apr 2, 2015
I've recently installed Debian 7.8.0 amd64 gnome on my new ASRock Q2900 mobo/cpu combo (It has an embedded Intel J2900)
The system boots fine but I am unable to restart it. If I tell the system to restart I see the mobo splash screen but before I see any mention of grub it gets stuck with a flashing cursor in the top left.
At this point I can hold the power button for 5 seconds and after it shuts down, I can boot it no problem. I can work my way around this issue but there shouldn't be any reason to need to.
View 14 Replies
View Related
Apr 1, 2015
My cursor blinks when hovering over the likes of web page tabs and disappears behind open windows especially if im in system settings its hard to know where my cursor is sometimes, its really putting me off and i don't want to install different distro because of it, i really like debian even being beginner with debian.
View 4 Replies
View Related
May 17, 2011
I have a machine with Squeeze that currently boots from an USB thumb drive (that was the only drive on that box, referenced as SDA in /dev... Yep, no optical drive or HDD). I have installed an SSD on that machine. It is referenced a SDA, and the thumb drive has been nudged to SDB. I'd like to boot from the SSD and ditch the thumb.
I've partitioned and formatted the new Disk (ext4), created a swap file (to keep things simple, no swap partition), and used rsync -Sax / /media/USB0/ to clone the content of the root FS. I've edited the fstab file of the SSD to match the config (uuid of the drive, ext4 FS, swap file) then use grub-mkconfig -o /media/USB0/boot/grub/grub.cfg (I apt-get installed grub 2)
I've set the SSD as first boot device in the BIOS. Now when I boot from the SSD, all I get is a blinking cursor at the top of the screen (the thumb drive still boots fine). I guess I missed something .
I've been struggling with this for about 2 hours now (not the grub issue, the whole mess). I've tried googling this last problem, then searched this forum with no luck (I usually find stuff about people who want to boot from a drive other than the first one and must daisy-chain grub).
Bootloaders (and low level linux stuff) are new to me. I'm afraid to botch the bootloader of the thumb drive (grub 1.9x), and to be locked out of the machine.
View 12 Replies
View Related
May 31, 2011
Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:
Code:
grub> root (hd0,4)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default
and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.
Maybe additional boot parameters?
Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:
Code:
title openSUSE 11.4
root (hd0,4)
kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5
initrd /boot/initrd-2.6.37.1-1.2-default
(I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)
View 4 Replies
View Related
Apr 2, 2010
I put the ubuntu 9.10 disk to install it I wait a long time then at the left upper corner a cursor appears blinking then I wait more then nothing happens.
View 3 Replies
View Related
Aug 20, 2011
Im using 5.6 DVD install to a HW raid1 Card (2 x SSDs in raid 1, Arcea Card Natively recognized by centos anaconda).I select to wipe the entire drive and remove ALL partitions (ive also tried setting this to just remove linux partitions). The install location (raid drive) is /dev/sdh the A-G are other 1.5TB drives.I also un-check EVERY drive except the raid drive (sdh). it then asks me if it ok to wipe/reformat drive (Prompts Yes or No, i click yes)Every time i do this install i get the blinking cursor after post. Im told this means i dont have GRUB installed, i do NOT disable grub or anything related to the boot-loader in anaconda installer (all those setting are left at default). ive also tried setting this to NO boot loader, and i get the same result.
This DOES work as i have gotten it to install and run prefect for a few weeks. I think what i did then was removed ALL THE DRIVES except teh raid drive, and then did the install then. This way the install drive was /dev/sdA and all worked, even when i added the drives back online after the install, the machine ran great and booted several times this way (i had to do a os re-install or else i would have left it as is.)YES bios is 100% set to the raid card as the first device to boot from, Centos 6 installed to the same raid drive boots and works great - but i need 5.6.no google help on this one, searched hard, only one article on Ubuntu doing this all the time.also everytime im retrying to install 5.6, i go into the HW raid card's bios and delete and recreate the raid1 volume (it takes about 10 min for it to format and initialize the raid1 array
View 2 Replies
View Related
Mar 9, 2011
I am trying to install any version of ubuntu (I even tried so far another version called jollicloud) but the result is always the same...The computer is a Dell Mini 9. I have pulled out it's SSD because it has broken.I managed to install about some months ago an ubuntu netbook version (10.04, not sure) which all worked fine from a 8GB usb stick Here are my steps:
1. Download ubuntu either netbook or standard version
2. Make a bootable flash with Unetbootin from ubuntu or other programs from windows
3. Put the flash disk and the second 8GB flash to the dell mini 9
4. Boot Ubuntu live from the first flash (sometimes I think I must put the second flash after the boot so it finds only the live version... If I have put both flashes sometimes it won' t boot)
5. install ubuntu to the other flash (to the 8GB flash drive)
6. reboot
and then...only a blinking cursor is appearing to the top left of the screen with nothing else happening...Shift does not do anything.I have some suspicion that there is no Grub at all but I am not sure for this.I am sure there is a way to make it because I ve done it before, but I don't remeber how!
View 3 Replies
View Related
Oct 25, 2010
just did a dual boot install on a brand new DEll T1500. The machine has win7 on it. I booted off the live CD and all looked well. Installation went well. When I reboot, I get grub, select the top linux option and then see a small black blinking cursor for a few seconds, then nothing. The screen reports no signal.
View 8 Replies
View Related
May 5, 2011
I have a MacBookPro5,2 with WinXP and Mac 10.6.7 installed. I created a new partition, and installed refit. I burned Ubuntu 11.04 32bit, rebooted, held 'c' and it started the boot process via the CD. It makes it to a brief Ubuntu image but changes the the blinking cursor and doesn't change. I see no menus and have no options except to be sad and reboot.
How should I proceed debugging this? Simply running Ubuntu via 'LiveCD' would be nice, as would being able to install Ubuntu. Should I try an alternative version of Ubuntu?
View 2 Replies
View Related
Jun 18, 2009
I installed F11 without issue but after rebooting all i got is a blinking cursor with no error messages or indeed any other form of feedback.
To check i was even getting as far as grub i went into rescue mode from the dvd and edited the grub.conf to remove the hiddenmenu option and set the timeout to something a little larger. This confirmed that grub does in fact seem to be loading fine. Selecting the Fedora entry still however leave me with just a blinking cursor.
Next i tried removing quiet from the boot commandline. same result.
Just in case i had the wrong disks configured in grub i tried swapping root(hd0,0) with every combination available with as expected various errors about either partition not being suitable or files not found.
Using grub to boot manually to a usb disk worked fine so grub does seem to work.
With no feedback at all i tried all the common options people suggest just in case the kernel is booting but not getting far enough to output to the screen. So far i tried noapic acpi=off nomodeset.
I tried installing 3 times so far with slightly different configurations just in case but still no luck.
Basic partition layout in case it helps:
/dev/sda <-- boot loader installed here.
/dev/sda1 /boot ext3 2GB
/dev/sda2 swap 4GB
/dev/sda3 / ext4 634GB
Various other disks are present but not part of the configuration. I double checked they are not mentioned anywhere in the common places like fstab.
View 5 Replies
View Related
Nov 23, 2009
I used the F12 DVD to upgrade my system, before all the NVIDIA warnings were posted. I have a Geforce 7100 (7 series) card and used the rpmfusion drivers on Fedora 11. After the upgrade, I get a blinking cursor at boot time. What I should do to repair the mess.
View 5 Replies
View Related
Oct 21, 2010
I decided to swap my media center PC over to Kubuntu after I had some issues with the Ubuntu 10.04 to 10.10 update. It has had Ubuntu on it for probably 3 years now. Most notably, the same issue is occuring now with any installer later than 9.04 which leads me to believe it is all Grub2 related.
The install runs without errors, but after booting from HD I get only a blinking insertion cursor. No Grub at all. I've held in shift, nada. I booted to Live CD and reinstalled Grub manually but still no love. It acts as though Grub simply isn't there.
I do have a second hard drive in the box that has Ubuntu 9.04 on it that I use as a backup if the OS HD gets messed up, but it is second in boot order and shouldn't be causing an issue. Besides, if that HD was booting it would be giving me legacy grub, not a blinking cursor.
View 4 Replies
View Related
May 3, 2010
I have just installed Xubuntu 10.04, on my Mac pro. I have OS X snow leopard on one hard drive (sd1), and I put lucid on another hard drive (sd2) (both SATA). The installation went perfectly.
The issue is that I cannot boot Ubuntu, the screen briefly flashes some colors, and then displays a blinking cursor. The screen is unresponsive to the keyboard, at this point I have to restart the computer.
My assumption is that there is a problem with my NVidia card and the drivers, but I am not even sure that grub loads as I cannot see anything until the blinking cursor comes up. Is there a way that I can boot into safe mode, and then install the proper video drivers? I must use OS X for the moment.
View 9 Replies
View Related
Sep 28, 2010
I have reinstalled the OS a couple times now. Not sure what else to check.(noobie)Its on a RAID 1 controller, so I'm wondering if that has something to do with it
View 2 Replies
View Related
May 1, 2010
I have a single XP install on another partition, but can't boot to it now that I have upgraded to 10.04. Also, when starting Ubuntu, it takes a good 30 seconds to actually start booting ubuntu after I have selected it from the GRUB list (just sits there with a blinking cursor)
Noticed other users have been directed to run the boot info script, so here are the results from that.
Quote:
View 3 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
Jun 22, 2011
I'm unable to boot into my Windows OS so Im trying to install Ubuntu 11.04 on a separate partition, so I can somehow get access to the files on Windows.
I made a live cd and a flash USB, both of which when I try to boot from, will go straight to a blinking cursor and nothing else, it won't allow me to type and there are no error messages. So I can't even get the install started.
I made sure both the cd and flash USB are bootable from another pc from inside Windows.
View 1 Replies
View Related
