Debian Installation :: Display Resolution Comaq Armada 7800
Aug 31, 2010
After spending the last couple of days running different distros on a old Compaq armada 7800 I've settled on Debian, as it's recognised most of the hardware with out to much tinkering
Only problem i have is the display resolution i need to run at 1024 x 768 but the max i can get is 800x600 I believe the display adapter is a S3 Virge/MX 2D/3D Dual Display Accelerator
Is there a driver/package I can download to correct this issue
I can use the console as long as some one give me Janet and John instructions
View 1 Replies
ADVERTISEMENT
Mar 17, 2016
How can I know the display resolution (e.g. 1280x1024 px) without starting X?I mean: let us suppose that /etc/X11 was renamed to /etc/x11. After reboot Debian starts in text mode only.
View 9 Replies
View Related
Nov 26, 2010
Recently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
View 1 Replies
View Related
Sep 19, 2015
I've just completed my first pc build, and installed Ubuntu 8.2. My build was focussed around a legacy Apple Cinema 30" display, which has 2560x1600 @ 60fps resolution. The motherboard - Gigabyte H97N-Wifi - supports that display, although the display drivers are supplied by Intel, and are therefore nonfree. On startup, my display resolution defaults to 1200x800. This is what /var/log/Xorg.0.log says about it:
Code: Select all[snip]
[ 1.830] (II) intel(0): Output VGA1 has no monitor section
[ 1.881] (II) intel(0): Output HDMI1 has no monitor section
[ 1.882] (II) intel(0): Output HDMI2 has no monitor section
[ 1.882] (II) intel(0): Output HDMI3 has no monitor section
[ 1.933] (II) intel(0): EDID for output VGA1
[ 1.986] (II) intel(0): EDID for output HDMI1
[ 1.986] (II) intel(0): Manufacturer: APP Model: 9232 Serial#: 33555281
[code]...
I bumped into a webpage which stated that xrandr does not work with proprietary drivers, and if that's true, I can't get it to change resolution on my screen.
View 2 Replies
View Related
May 6, 2010
I've decided to try Debian Lenny, after i succefully installed it without any problems there appears to be a problem - after loading the services and etc, my monitor turns off with a floating message saying it cannot display the current resolution, and that i should set it to 1280x1024@60Hz.
View 1 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Jun 29, 2010
I have a brand new computer with an ATI Radeon HD5850 video card I have a LCD monitor with a native resolution of 1920x1080. I installed Debian Testing 2.6.32-5-amd64
Because I have several machine, I use a KVM (switch keyboard) in the middle. This KVM is quite old but still work correctly only problem is that it don't forward the EDID information. Until now it wasn't a problem, and by specifying the correct parameters of the monitor in /etc/X11/xorg.conf , I always succeed to reach the 1920x1080 resolution
In installed the proprietary drivers from ATI Catalyst 10.6 (last version)
since I have 2 problems :
first in the console I used framebuffer in 1280x1024x32. Before installation of the ATI drivers, it was ok, now the screen is completely black !! on every tty (I didn't investigate much on this trouble yet)
Second problem:
I can't reach the native resolution of my monitor ! No matter what I'm doing, the best the driver propose is 1600x1200 !!
I made a lot of test and modification in xorg.conf but without success, it always goes back to this resolution and never propose something higher For information, if I connect the monitor directly to the video card (removing the KVM), everything is OK and the resolution is automatically set to 1920x1080
/etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code].....
View 3 Replies
View Related
Jul 4, 2014
I have wheezy installed on my laptop with XFCE 4.8 and kernel 3.14 from backports. The laptop uses Nivida-optimus:
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 1292 (rev a1)
I installed the proprietary bumblebee-nvidia (version 3.2.1) as per the instructions in URL...The problem is that when I connect a monitor to the laptop, the image is duplicated with only part of the screen showing on the second monitor. The monitor itself is not detected in the display settings or arandr / xrandr, so I can't change the resolution or set dual display, etc. Here is the output of xrandr:
Code: Select all$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 0.0*
View 0 Replies
View Related
Aug 9, 2015
I have a nVidia GeForce GTX 760 Ti Graphics card. I have installed the proprietary driver and disabled the open source one. The problem is when I connect to two monitors via DVI and VGA, the VGA one appears to be 'unknown' and is using incorrect resolution of 640x480. How can I correct its resolution?
The xrandr output
Screen 0: minimum 8 x 8, current 2560 x 1080, maximum 16384 x 16384
DVI-I-0 connected 640x480+0+181 (normal left inverted right x axis y axis) 0mm x 0mm
640x480 59.9*+
320x240 120.1
DVI-D-0 connected 1920x1080+640+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0*+
1680x1050 60.0
1440x900 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x720 60.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
View 0 Replies
View Related
Aug 18, 2015
my TV resolution is 1366x786, I've set it with xrandr [URL] , but any mode I pick there are two black strips on the sides of my TV display. I'm using debian jessie 8.1 and xfce.
View 4 Replies
View Related
Jan 10, 2011
I'm trying to get a framebuffer console with acceptable scrolling speed on Dell XPS M1530. It has GeForce 8600M GT card with maximum resolution supported by bios 1920x1200
# cat /sys/class/graphics/fb0/modes | sort
U:1024x768p-60
U:1280x1024p-59
U:1280x800p-60
U:1600x1200p-60
U:1920x1200p-60
[Code]...
View 9 Replies
View Related
Jul 1, 2014
I have 3 little pieces of hardware called Xcore.
They are very stripped down computers with minimal configuration : 1Ghz CPU, 1GB RAM, 1 SD Card (and usual USB/VGA ports).
Everything runs fine out of the box with Debian 7.2
Linux debian 3.2.0-4-486 #1 Debian 3.2.51-1 i586 GNU/Linux
View 6 Replies
View Related
Apr 19, 2010
I purchased a lenovo G550 recently and immediately dumped the Windows OS for Ubuntu 9.10. The display is currently defaulting to 1366x768. From reading it looks as though this display can support both 16:9 and 16:10 aspects. I have ran through the xrandr commands attempting to set my resolution to something...anything bigger than 1366x7768 (I'm used to 1600x1200 from my old T61, so this is painfully small). As a test I am trying to get 1920 1200, from my xrandr results it looks like it should be within the lcd's range. xrandr commands failed on me as I have seen on a couple other intel based resolution problems. I don't fully understand the root of the problem and have not had any luck in my searches. So I have also attempted to manually create the xorg.conf file, not luck yet.
Code:
user@Home:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)Cantiga Graphics Controller Hardware Version 0.0
[Code]....
View 4 Replies
View Related
Apr 13, 2010
Ive just installed Fedora 12, max resolution option is 800*600 can someone advise how i can adjust or improve the resolution to at least 1200*700?Hardware: HP D330m, 2.8GHZ, 700MB RAM, VGA is a Intel Extreme Graphics Display.
View 6 Replies
View Related
Feb 2, 2010
I installed 9.10 on a computer I'm working on, and right away the graphics went out. It won't display the proper resolution without shoving the display significantly to the left.
After MUCH Googling, I found that this can be fixed by a driver called i915. After much MORE Googling, I found [URL], which as you can imagine filled me with relief.
And THEN I try to follow the instructions and discover to my pure horror that GRUB has been gutted and made unusable in 9.10. GRUB2 just simply does not seem to have an option to insert the i915 driver into my boot command.
should I just forget this unstable release and burn a 9.04 disk instead?
View 5 Replies
View Related
Mar 8, 2010
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Now i'm starting to get frustrated
[Code]...
View 3 Replies
View Related
May 4, 2010
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
View 2 Replies
View Related
Dec 7, 2009
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies
View Related
May 13, 2010
I 've managed to install it, but every time i reboot i get the black screen...Tried millions of workarounds to no avail, some of them only made things worse.
Processor: AMD Turion 64 X2 Dual-Core RM-76 2.3GHz
Video card: ATI Mobility Radeon HD3200 up to 256MB
I always use recovery mode when trying to boot up...and sometime (like 1 out of 15 times) i manage to get in, and when i try failsafeX i get into the system. Does anyone have any recommendation about what should i do?? How can i make my computer boot regularly?
View 1 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Sep 2, 2011
I have installed debian squeeze with XFCE following this tutorial:It worked well, but I have one problem: the resolution is not right. How could I change it?The only resolutions that are available right now are 1280x1024, 1024x768, 800x600, 640x780. I have a 19" wide screen, so the resolution should be 1440x900. I couldn't find xorg.conf since it seems new xorg doesn't need it anymore.
View 9 Replies
View Related
Aug 3, 2010
I use an old notebook 15' LCD, (4:3) with the ridiculous (for fly eyes) resolution of 1400x1050. My eyes are not young anymore. On Ubuntu I could select the resolution of 1152x864 which is fine (1024x768 is too big and really makes me look like a grand-daddy...). How can I set 1152x864 on Fedora 13, if it is possible and how? Recent distribution do not rely on a xorg.conf file anymore. I use an older 9000 Mobility Radeon, and there are no proprietary drivers anymore, but the open source one. I gave it a try. Install the package to create an Xorg default and edited my resolution
Code:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]...
I have changed the keyboard option to kill X with <Ctrl><Alt><Backspace> keys. That does not work--yet. No 1152x864 resolution.
View 6 Replies
View Related
Feb 23, 2011
I am using a tv as a 2nd monitor and it has a very abnormal resolution. I have tried to set it but failed.
How do I do this?
View 3 Replies
View Related
Jun 9, 2010
I'm running 10.04 desktop on a Dell PowerEdge T710 connected to a Dell 22" LCD (E2210). The T710 uses a Matrox G200eW chipset. For some reason, I can't set the display resolution to the native res of my monitor (1680x1050). For what it's worth, here are the contents of /var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux map-renderer-1 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=95546d53-2465-4192-84e4-ed7d2a6a8491 ro quiet splash
[Code].....
View 7 Replies
View Related
Nov 15, 2010
I have a Dell U2311H monitor which has a native resolution of 1920 x 1080. My graphics card is an ATI 6870.
Last night I installed Ubuntu 10.10 alongside my Windows installation, and when booting into Ubuntu, the maximum resolution I can select is 1280 x 1024.
How can I resolve this to get Ubuntu to display at the native resolution?
View 9 Replies
View Related
Jun 27, 2009
I changed my display resolution to 832x624 from a higher resolution. Now all my resolution higher than 832x624 have disappeared and I cannot set a higher resolution.Does anyone know how I can get my higher display resolutions back.
View 4 Replies
View Related
Apr 17, 2011
I'm using rdesktop to remotely access a winxp box from F14. However I'm not getting high resolution. Please help me to get high resolution. The machine is at the same lan and no bandwidth problem here.
View 5 Replies
View Related
Aug 11, 2010
I've just installed BitDefender on my 10.04 netbook, updated and activated it, completed a scan, and found Backdoor.Generic.284566 The thing is, it won't let me delete/quarantine the nasty. BitDefender does give me a warning about my screen resolution being too low (800x600), i believe this may be the problem. The option buttons are not visible on the screen, therefore I cannot use the program properly.(i tried the max resolution 1024x600, but to no avail )
View 3 Replies
View Related
Feb 5, 2011
I just put a HTPC together, it's a MSI 890GXM-G65 RT motherboard (on-board video, no video card) connected to a TV (SAMSUNG LED UN40B70) via an HDMI cable. I've put latest Ubuntu Desktop 10.10 on it. Installation went beautifully, the screen placed correctly, However, once it was actually running, the display is totally wrong. Looks like it's too far to the left and up - there's nothing on the screen except for background, at 1920x1080 resolution. Once I change the resolution to lower, it works.
View 2 Replies
View Related
Mar 2, 2011
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
View 7 Replies
View Related
