Ubuntu :: Display Out Of Bounds At 1920x1080 Resolution?
Feb 5, 2011
I just put a HTPC together, it's a MSI 890GXM-G65 RT motherboard (on-board video, no video card) connected to a TV (SAMSUNG LED UN40B70) via an HDMI cable. I've put latest Ubuntu Desktop 10.10 on it. Installation went beautifully, the screen placed correctly, However, once it was actually running, the display is totally wrong. Looks like it's too far to the left and up - there's nothing on the screen except for background, at 1920x1080 resolution. Once I change the resolution to lower, it works.
I have a serious problem: I just installed Ubuntu 10.04 on my computer which has a Hanspree HF257 25-inch monitor with a native resolution of 19201080. I have an NVIDIA GeForce 9400GT graphics card, and before I installed the proprietary NVIDIA drivers, the screen resolution was fine, but after I installed the recommended drivers, the screen resolution went way down after restart!
The monitor is recognized only as a "CRT-1 (CRT-1 on GPU-0)″ under the NVIDIA X-Server settings. The highest resolution I can adjust it to is 1360768. I have no idea what to do, but I'm sure there's a fix for this, right?
I installed Natty about a month ago. First time i installed, i got this same problem.Installation pendrive works on 1920x1080, and the first time it boot it was lovely.I did all the recommended installs, including ATI / AMD proprietary FGLRX Drivers, and the second time my machine boot, it came on 1600x1200. I did some troubleshooting with xrandr, and was able to get HD resolution again, until i rebooted, and then i couldn't even get it with Xrandr.
This is really driving me nuts. I was able to get it fixed by going into recovery mode, and running ubuntu in low graphics mode, i was choosing reconfigure and it worked sometimes, but now i'm stucked with 1600x1200 and i hate it. I don't want to go back to windows, and i really followed every trhead i found with solutions and can't get it to work.I forgot to mention that i have an Ati Radeon 4670 video card. Also i am a total n00b on linux, i am good at following instructions though
After 2 weeks of the nightmare that is KDE4 I've been driven back to S12.2 and the sanity of KDE3.5.
However, I'm unable to get higher res than 1024x768. Monitor is a BenQ G222HDL and card is an ATI Radeon HD4760.
Relevant section of my xorg.conf is:
As you can see I've mucked about a little bit with alternative drivers and resolutions and poked around via google without anything obvious popping up, but I suppose the driver is the issue. # randr only ever gives me 'can't open display'. I realize this is a new monitor on an older OS. Should I try the xf86 drivers from ATI, or will running xorgconfig do the trick with such a new card?
I just installed Ubuntu 9.10 I have ATi HD5700 and its Catalyst drivers downloaded from http://ati.amd.com
The monitor is Hanns-G HH251 (25", 1920x1080@60 max) I cannot make either "Display Settings" or "ATI Configuration" to show the refresh rate of 60 Hz as available. When I change the resolution to 1440x900 then I can pick 60 (but obviously I don't want that resolution). However, if I pick 1920x1080, the only two refresh rates available are 25 and 30 Hz, causing the image to flicker and whatnot.
The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):
[Code]....
I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?
I installed Ubuntu 10.04 on a new system. The system is not showing correct resolution in the grub menu and the splash screen is black, until I reach the logon screen.Screen resolution, and video rendering after booting is picture-perfect.I presume this is a bug of the sort "VBE does not support 1920x1080 wide screen resolution".Or, maybe I am missing some point.I hope there must be some workaround.
I recently bought a 37" Vizio M370NV HDTV and connected it to my Kubuntu 10.10 desktop.Currently my resolution is 1280x1024, so there is black bars on the side of my screen. I want my resolution to be 1920x1080, which is what the TV/monitor says is it's primary resolution. However, when I set that resolution in nvidia-settings, my screen scrolls up. By that I mean that my screen keeps moving up my monitor and appearing at the bottom.
It's looking like from the options on the grub CL that the highest I can go is 1280x1020x32bit. But it still does not fit my entire screen (23'' LED) if there is a way to make runlevel 3 1920x1080, I have a Nvidia GTX460. Also, whether or not I can do it, how do I save the settings, so I don't have to type it in at the bottom of the screen in the boot menu? How do I drop back to runlevel 3, when I'm in the x system (GUI)?
I've instaled 11.4 and in personal configurations the resolution is set fine (1920x1080), but it's don't maximizes all monitor area. I'm using Radeon 5670 with a TV/Monitor HDMI connection 1080p.In Win7 running fine.
I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
I purchased a lenovo G550 recently and immediately dumped the Windows OS for Ubuntu 9.10. The display is currently defaulting to 1366x768. From reading it looks as though this display can support both 16:9 and 16:10 aspects. I have ran through the xrandr commands attempting to set my resolution to something...anything bigger than 1366x7768 (I'm used to 1600x1200 from my old T61, so this is painfully small). As a test I am trying to get 1920 1200, from my xrandr results it looks like it should be within the lcd's range. xrandr commands failed on me as I have seen on a couple other intel based resolution problems. I don't fully understand the root of the problem and have not had any luck in my searches. So I have also attempted to manually create the xorg.conf file, not luck yet.
I'm running 10.04 desktop on a Dell PowerEdge T710 connected to a Dell 22" LCD (E2210). The T710 uses a Matrox G200eW chipset. For some reason, I can't set the display resolution to the native res of my monitor (1680x1050). For what it's worth, here are the contents of /var/log/Xorg.0.log:
X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu Current Operating System: Linux map-renderer-1 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=95546d53-2465-4192-84e4-ed7d2a6a8491 ro quiet splash [Code].....
I have a Dell U2311H monitor which has a native resolution of 1920 x 1080. My graphics card is an ATI 6870.
Last night I installed Ubuntu 10.10 alongside my Windows installation, and when booting into Ubuntu, the maximum resolution I can select is 1280 x 1024.
How can I resolve this to get Ubuntu to display at the native resolution?
I changed my display resolution to 832x624 from a higher resolution. Now all my resolution higher than 832x624 have disappeared and I cannot set a higher resolution.Does anyone know how I can get my higher display resolutions back.
I installed 9.10 on a computer I'm working on, and right away the graphics went out. It won't display the proper resolution without shoving the display significantly to the left.
After MUCH Googling, I found that this can be fixed by a driver called i915. After much MORE Googling, I found [URL], which as you can imagine filled me with relief.
And THEN I try to follow the instructions and discover to my pure horror that GRUB has been gutted and made unusable in 9.10. GRUB2 just simply does not seem to have an option to insert the i915 driver into my boot command.
should I just forget this unstable release and burn a 9.04 disk instead?
I've just installed BitDefender on my 10.04 netbook, updated and activated it, completed a scan, and found Backdoor.Generic.284566 The thing is, it won't let me delete/quarantine the nasty. BitDefender does give me a warning about my screen resolution being too low (800x600), i believe this may be the problem. The option buttons are not visible on the screen, therefore I cannot use the program properly.(i tried the max resolution 1024x600, but to no avail )
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
I just installed Kubuntu on my computer running win xp. I have had problems with the resolution because it only lets me set it at 800x600. I have read many of the post here and most of them tell your to use xrandr or xorg config. When i run the xrandr iI end up with a message saying can't open display and also when i try the xorg confing. I installed kubuntu using wubi.
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Would someone please point me in the direction of how to change the display resolution on Ubuntu server version 9? I am talking about the actual VGA port on the back of the server. I am NOT talking about anything related to XWindows or a SSH session. This is a text based display. When I installed Ubuntu Server 9 on my server I picked a larger display resolution than I really want.
I installed Ubuntu 11.04 about a week ago and everything has been fine except that Ubuntu thinks my monitor has a resolution of 1024x768, while the actual resolution is 1366x768. I can't set a higher resolution through the visual interface (my monitor is detected as "unknown") Are there commands I can issue through the terminal to sort this out?
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
I use an old notebook 15' LCD, (4:3) with the ridiculous (for fly eyes) resolution of 1400x1050. My eyes are not young anymore. On Ubuntu I could select the resolution of 1152x864 which is fine (1024x768 is too big and really makes me look like a grand-daddy...). How can I set 1152x864 on Fedora 13, if it is possible and how? Recent distribution do not rely on a xorg.conf file anymore. I use an older 9000 Mobility Radeon, and there are no proprietary drivers anymore, but the open source one. I gave it a try. Install the package to create an Xorg default and edited my resolution
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
I am on Lucid 10.04 with Nvidia 9600m (v195.36.24) My TV is 1280x720, my Laptop is 1600x900 (Closest setting to the TV is 1360x768 ). I plug my laptop to my tv via an HDMI cable. I press F1 to get into my presentation mode, and the tv shows most of the desktop, but not all of it. Is there any way to conveniently make it so it automatically sets it to 1280x720?
I have Lucid 64 connected to my 27" TV with 4:3 aspect ratio via s-video from an nVidia NV4 GeForce 6200SE TurboCache 256 MB card using the 173 driver set at 800X600. After hours (don't get on my case, this is the first time I've had hardware that would run well on a TV) and hours of tinkering I've gotten a feel for how to do this and have some pretty good results. However, I have two problems.
.01 The display isn't quite filling the entire screen. It's leaving about a .25 inch black bar all the way around the screen. This is negligible and if I can't fix it with only minor adjustments then so be it. I can live with it.
.02 This one isn't so minor. Many of the Windows are opening with portions of themselves cut off of, usually, the bottom of the screen. This makes, among other things, getting to the Close button rather impossible.
Recently I encountered a problem with a triple-monitor setup where the EDID was rejected by the nvidia driver (version 195.36.0, claiming that the EDID checksum was invalid. The maximum resolution that the driver would allow was 640x480. Searching through the X logs (/var/log/Xorg.0.log), I found the following message:
Code: (WW) Jul 26 21:37:57 NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the (WW) Jul 26 21:37:57 NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid.
