I'd like to include the backports repo and the backports kernel in a live cd. I copied the debian-backports file from /usr/share/live-helper/examples/source to config/chroot_sources(as debian-backports.chroot and debian-backports.binary) and fixed the first problem (had to change "etch" to "lenny" in the files.)
View 3 RepliesHowto create USB Live image using live-helper under Lenny?
View 1 Replies View RelatedI'm using Live helper to create install discs. I have the system all set up as it needs to be to run live from t a DVD, and have tested the installer on built ISOs and it works great.However, I can't seem to keep my modified /etc/gdm/gdm.conf file from being replaced with a pristine default gdm.conf. I have even placed it under config/chroot_local-includes//etc/gdm/gdm.conf which I thought should work?
View 4 Replies View RelatedI have been trying to build a Debian-live-version for some time using live-helper. It works fine if I choose lenny as distribution. With sid I always get into trouble.Sometimes live-helper does't find any aufs-modules but it stops looking for them if I keep the options as simple as above.What is the problem of live-helper's to build on sid or squeeze (which I have met similar troubles with)?
View 10 Replies View RelatedHow to install live-helper under Lenny?
View 3 Replies View Relatedwhich default file system will be created on usb stick using live-helper usb-hdd image?
View 1 Replies View RelatedBackports are not only drivers? And why backports are disabled by default?
Also: What are debug backports, and may I install them - will they work?
I tried to use debdelta for an upgrade, but it only worked with the main debian and security repositories, and did not work with the backports repository (which is where the largest files, specifically openoffice.org, are for my system). Is there a way to set up debdelta to be used with backports? I tried editing the /etc/debdelta/sources.conf file to include it, but this did not work.
View 2 Replies View RelatedI'm running Debian Lenny. I'm not pleased with kde4 so I'm going to be staying with Lenny. But I'm really looking to upgrade the old Openoffice 2.4 to 3.x. I've got the backports entry in my apt sources.list file. And I have downloaded the packages list. I'm just wondering if anyone else has installed the OO.o from backports? Does it work good and does it futz up anything from the stable install?
On a side, does anyone know where to get an updated Kopete. The version in Lenny is old and won't connect to Yahoo chat anymore (I guess they changed the protocol again.
These are really the only two reasons I messed with KDE4 anyhow. Kopete isn't a big deal because i can always use Yahoo messenger online anyhow, but really want to see how OO.o 3.x works.
For the 2nd time in a year. I really need v3.xx because 2.4 breaks formatting when opening v3 files. Why did i go back to 2.4 ? 3.1 was slower with calc. Now I'm stuck with 2.4 because of the ongoing stupidity in backports.org.
# aptitude install openoffice.org -t lenny-backports
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
The following packages are BROKEN:
[Code]...
If I install (say) Iceweasel from Lenny Backports, do I need to un-install the standard Lenny Iceweasel first, or will the new one overwrite/upgrade the old one? And- I understand pinning I think, but nobody explains what the * in the line:Package: * means. Does it mean all packages installed from the release specified in the line Pin: release a=lenny-backportsor do I need to specify each package in it's own entry (in /etc/apt/preferences)?
View 1 Replies View RelatedThe Debian Project is proud to announce that the backports service, previously available at [URL].. is now an official Debian service and will be available from backports.debian.org Backports are packages from the testing distribution recompiled for the current stable (or even oldstable) to provide users of the stable distribution with new versions of some packages, like the Linux kernel, the Iceweasel browser or the OpenOffice.org suite, without sacrificing the general stability of the system.
The archive currently has packages backported for the Lenny distribution (how many?), but the infrastructure to accept packages for the upcoming Squeeze release is already in place, to allow Debian Installer images to configure the backports repository by default without generating errors on user systems. The service for Squeeze will be enabled at a later date, after the release.
Because of some limitations in the Debian Bug Tracking System, any bugs relevant to backported packages still have to be reported to the debian-backports list, which will now also move on lists.debian.org.
I'm looking for correct backports repository for Lenny?
View 2 Replies View RelatedI tried to install nvidia drivers & when I tried aptitude update it says that 'backports.debian .org' Release file has expired ignoring......How long does it normally take to update?
View 5 Replies View RelatedIf I use testing with the backports.org repository, will "apt-listbugs" work on any package I try to install from backports?
I'm not expecting to use backports a lot, but there may be a case where I need a newer version of a program, from unstable.
After adding the backports from 8/Jessie to a 7/Wheezy sources.list and running aptitude update, I get these odd error messages. What is going on?
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: You may want to run apt-get update to correct these problems
While I've been using Debian for various years, I have never actually used Stable. No Stable means no Backports, and I have a doubt about the latter. After reading Backports's documentation and the APT Preferences's manual page, I understand that, as of Squeeze, a backport must be installed manually, and that already installed backports are automatically updated. Also, because Backports archives have a pin-priority of 1, one cannot update all installed packages to the versions available in Backports.
I guess that one could achieve it by giving the Backports archive a pin-priority of 991. However, using the whole Backports repository is discouraged everywhere, and I don't really know why. How serious are these warnings? Does it cause a dependency Hell or is it just a warning for novice users?
I see that the backports now is officiel. My question is rather simpel: Is it possible to upgrade with (and how to) the backported packages without to much work? Is is needed to install all backported packages individually? I want to upgrade to any backported package with the command:
apitutude safe-upgrade - if it is possible.
I'm new to Debian, but have used Ubuntu so I'm relatively familiar with APT. Ubuntu doesn't have backports, though, and I can't figure this out. I've checked the documentation for the answer, and I'm hoping that I'm just overlooking something simple.
I'm running lenny, and I want to install the Empathy instant messenger that's in lenny-backports (v. 2.26.2-1). I already have the stable package installed, and here's what happens when I try to upgrade:
michael@archimedes:~$ sudo apt-get -t lenny-backports install empathy
Reading package lists... Done
Building dependency tree
Reading state information... Done
empathy is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 118 not upgraded.
[Code]...
I get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies View Relatedwhen i want copy something from dvd my debian squeeze is total slow cpu ussage is 100% and write 2.2 mb/s and musick is stop and play. This same is on burning cd /dvd the device buffer is an about 10-15% this dvd is Pionier 116D on windows xp work perfect. I try benchmark dvd form gnome-disk-utility but i got Error benchmarking: helper exited with exit code 1: Device /dev/sr0 is too slow to benchmark
[Code]....
( everything works on debian lenny on the old kernel 2.6.26 ) I instaling a few kernel and compiling 2.6.35.7 with .config file form ubuntu on finaly didn't help
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedIs there stability advantages to installing the mint-meta-debian package from the repo below??? I have read that LMDE is safer than running Testing because there is less chance for breakage with LMDE. Less risky overall. Is that true?
# Linux Mint Debian Edition (I get Firefox from here)
# get the mint-keyring from the repo
deb http://packages.linuxmint.com/ debian main upstream import
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
I can't seem to find this anywhere. I have burned Debian 5.06 for i386 and trying to login when running the live cd. What is the username and password to get in?
edit....
I found 'user' and 'live' but they don't work.
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
YaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
Debian 504 64-bit.Is Eclipse available on repo? In the later case where shall I retain the package for installation ? /opt ? Or /home/user ?
View 4 Replies View RelatedI am trying to get snatpanic to read the Linux mint dvd so i can use it as a repo, but it won't read it? Says its not a debian cd?
View 9 Replies View Related