I have been trying to build a Debian-live-version for some time using live-helper. It works fine if I choose lenny as distribution. With sid I always get into trouble.Sometimes live-helper does't find any aufs-modules but it stops looking for them if I keep the options as simple as above.What is the problem of live-helper's to build on sid or squeeze (which I have met similar troubles with)?
View 10 RepliesHowto create USB Live image using live-helper under Lenny?
View 1 Replies View RelatedI'm using Live helper to create install discs. I have the system all set up as it needs to be to run live from t a DVD, and have tested the installer on built ISOs and it works great.However, I can't seem to keep my modified /etc/gdm/gdm.conf file from being replaced with a pristine default gdm.conf. I have even placed it under config/chroot_local-includes//etc/gdm/gdm.conf which I thought should work?
View 4 Replies View RelatedI'd like to include the backports repo and the backports kernel in a live cd. I copied the debian-backports file from /usr/share/live-helper/examples/source to config/chroot_sources(as debian-backports.chroot and debian-backports.binary) and fixed the first problem (had to change "etch" to "lenny" in the files.)
View 3 Replies View RelatedHow to install live-helper under Lenny?
View 3 Replies View Relatedwhich default file system will be created on usb stick using live-helper usb-hdd image?
View 1 Replies View RelatedI have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
I need to have a persistent Debian install on a thumbdrive to run a computer that is currently diskless (dead hard drive). So far I've managed to get it to boot Squeeze live beta by setting up the thumbdrive with UNetBootin, but it's not persistent. I found this, but step 6 is a mystery to me, as I can find no such command or package.
View 12 Replies View RelatedA Linux user for about 10 years, distro hopping for half of them. Finally found peace with PCLinuxOS (great distro), and MintLinux. When Mint went over to Debian, I thought why not try the original, so here I am.Booted the dvd, checked everything was working well (excellently, actually), and started the install over an existing PCLinuxOS system (dual booting with XP). First time installed while inside the gnome system, from the desktop icon, second and subsequent times from the welcome screen after boot (only text modes were available).In all cases, everything goes fine until I partition and install the packages. Partitioning is no secret to me, unless there is a "Debian way" of doing it: went through "guided partitioning," and chose the existing PCLinuxOS partitions, 37 Gb for /, ext3 (tried ext4 later with same results), and 2 Gb for swap, both on sda (sda1 and sda5). This is a full hard-disk, just for Linux. The other disk is for XP (sdb).
Tried formatting existing partitions, erasing contents of disk, and keeping as is. In all cases, when partitioning is done, the system installation fires up and I see all packages being transferred (up to 100%). Then I have a pop-up window telling me to continue to package manager, which I do, but then I get a message saying that I am trying to install on an "unclean target," over an existing installation (even after fully erasing the disks). It asks whether to continue or not and, whatever I do, I'm taken back to system install again, and see the progress go up to 100% and the same question again.
If I go back to the install menu and ignore the message, jumping to installing grub, I get an error message saying that grub install has failed, and that's it. I can't progress further because of these error messages.If I ignore all and boot without the live dvd, I get a prompt and nothing else, and I can't even use XP. Basically, I'm stuck unless I install another distro again to have a working system.First searched this forum and Google to get answers to this problem, but couldn't find anything applicable to my case.
I burned an .iso of a recent Squeeze Live DVD - KDE edition. I was checking it out but I'm not sure it's reliable for installing.I was wondering if anyone has tried it or could comment.I noticed a few things that was a bit disconcerting.One, there were a lot of 'question marks' in the kickback menu.Is that normal?Two, when you (I) try to reboot the system or otherwise 'leave' the live state, it doesn't reboot properly.Some distributions will 'shut down' and then give you a prompt for taking out your CD or DVD and then there is some script or program that reboots the machine for you. But, the Debian Live DVD I used didn't do that. It's a recent one, dated Dec. 20.What happened is that it just looped back and re-started.There was no prompt or even much of a delay. I couldn't open the optical drive tray at any time.I had to cold restart the machine so I could take the DVD out.
I was disappointed since I thought it is a good project and a worthwhile venture to try and have a live media option for installing the later editions of Debian such as Squeeze or if they can keep up progress, whatever edition it's at.I am a bit hesitant to try this version for a true install so I am wondering what others say.I thought I should go for the 'desktop Squeeze/Testing AMD-64-KDE' CD ISO instead?There's no live media but I have tried the live DVD so it looked okay other than the two issues mentioned.
Is it possible and how it works to build squeeze live usb-hdd on lenny or it's really necessary first to upgrade my lenny to squeeze?
View 3 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
Is it possible and how it works to create live usb-hdd squeeze with self compiled kernel?
View 2 Replies View Relatedhow to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedI installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedWhen I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies View RelatedWhen I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.
View 2 Replies View RelatedGot a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.
View 14 Replies View RelatedI installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :
[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:
[Code]....
I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-
[code]...
As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0
View 9 Replies View RelatedA couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.
Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.
I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.
View 9 Replies View RelatedAlright, first Squeeze wouldn't create an initial RAM disk even with "--initrd" specified. Now I don't need one and it's creating one for me even though I don't want one! How do I stop this? I'm beginning to feel like I am using Windows in the sense that it's doing things on its own. Don't make me a RAM disk unless I say so!
View 10 Replies View RelatedI just noticed that I had a sid line on my sources.list, at the end of all squeeze lines, and I've been updating more or less regularly. Does the ordering imply some sort of "preference", so that the first lines are preferred over the subsequent ones, or is it all about the latest version?After removing that line, and taking a look at my installed packages with synaptic, all the "latest versions" of the packages seem to be the ones that are already installed, and I click on properties, and there are no older versions available, only "##.##-### (testing)". Emphasis on "testing", rather than "sid" or "unstable". Of course I didn't check all of them, but about a dozen, and none deviated from that pattern. However, I went to double check on the web pages about the packages, and it seems that many of the squeeze's packages are at the same version of sid. I couldn't yet find one that is not.perhaps the sole fact that the sid line was on sources.list is enough to know that something happened -- as I don't recall having ever set up those configuration files about preferred sources/pins or however it's called), and suggestions on how to proceed? My hunch would be to just downgrade things gradually as they eventually fail (as I did with geeqie, which is why I suspect that there is some mess), but leave everything alone. Not try to fix what is not quite broken. And if it fails too often, go full-blown sid.
View 14 Replies View RelatedI don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused
View 4 Replies View Related1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.