Debian Configuration :: Error Message After Adding Backports
Jan 21, 2016
After adding the backports from 8/Jessie to a 7/Wheezy sources.list and running aptitude update, I get these odd error messages. What is going on?
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: You may want to run apt-get update to correct these problems
View 3 Replies
ADVERTISEMENT
Apr 10, 2011
While I've been using Debian for various years, I have never actually used Stable. No Stable means no Backports, and I have a doubt about the latter. After reading Backports's documentation and the APT Preferences's manual page, I understand that, as of Squeeze, a backport must be installed manually, and that already installed backports are automatically updated. Also, because Backports archives have a pin-priority of 1, one cannot update all installed packages to the versions available in Backports.
I guess that one could achieve it by giving the Backports archive a pin-priority of 991. However, using the whole Backports repository is discouraged everywhere, and I don't really know why. How serious are these warnings? Does it cause a dependency Hell or is it just a warning for novice users?
View 8 Replies
View Related
Apr 3, 2011
I have been trying to install programs and I keep getting a screen error message. and it does it on every package i install unless i remove screen.
[code]...
View 3 Replies
View Related
May 4, 2010
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
View 2 Replies
View Related
Apr 11, 2011
I just installed a TrendNet TEW-649UB wifi dongle, which works when it wants
Anyway, I set up ICS, it didn't work, so I undid what I had done from the tutorial, I also cleared IPTable rules, but now I still get error messages as you can see on the attachments.
View 1 Replies
View Related
Apr 11, 2009
Backports are not only drivers? And why backports are disabled by default?
Also: What are debug backports, and may I install them - will they work?
View 1 Replies
View Related
Nov 4, 2010
I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).
lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-
1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)
I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-
ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
View 1 Replies
View Related
May 3, 2010
I want to be able to have two x terminals at a time, one for the graphical login, and one for miscellaneous 'startx's by tty users. How can I do this? Can I do this?
View 3 Replies
View Related
Nov 16, 2010
firewall server which runs on Debian and then theres windows 2003fileserver. On this machine runs as well SQL server. Letssay it listens to port 1000. From other windows machines I want to connect to this Sql server which holds library database for users. But the connection cant be made. Possible error that firewall Debian machine want let the packets through.So how to I add a rule into iptabels (what file to open and edit?) So that all localconnections to the server lets say which is 192.168.0.2 and the firefall machine is 192.168.0.1 go through! So the connections allowed would be 192.168.0.3-255. How is it safe to do and how will it look like? Sql server uses TCP/IP connection. Heres what I found from web, I think this may be the right rule, but how i modify it correctly.iptables -A INPUT -p tcp -s 0/0 --sport 1000 -d 192.168.0.2 --dport .........? -m state --state NEW,ESTABLISHED -j ACCEPT
View 1 Replies
View Related
Jun 22, 2011
I just installed Debian 6 squeeze on a P3, 632 MB RAM, 20 GB HD, and am trying to get it on-line. Ran lspci and lsusb on it (advice from another forum). Got the following results:
[Code]....
Exactly what I am trying to do: Existing network is as follows: Comcast internet to cable modem to Belkin N Wireless Router Model F5D 8236-4 v3. That router is wired to one desktop (running Windows XP)and has 4 wifi notebooks (two running Windows 7 and two running Mint 9 Isadora) and two Wii consoles running off of it. I am seeking to add another desktop to the network in another room without having to drill some holes and run about 40 feet of cable. Seems like it shouldn't take much to get the two routers to "talk" to each other so I can do this. The router I am trying to hook to it is either a Belkin F5D 9230-4 wireless router or a NetGear N150 WNR1000 v2 Wireless router.
View 6 Replies
View Related
Jul 26, 2011
I am currently running a Debian 4.0 (etch) PC and I can't upgrade to a newer distribution for legacy software reasons.
It is currently running on Kernel 2.6.18-4-686 and I would like to upgrade it to Kernel 2.6.22-3-686 (whilst keeping my current Debian 4.0 Etch installation). Does anyone know how this could be possible?
Prefereably I would like to instal Kernel 2.6.22-3-686 along side my current Kernel 2.6.18-4-686 with the option to specify which kernel to use when booting.
View 6 Replies
View Related
Feb 24, 2016
I'm trying to setup a PXE server with Jessie. I've got the basic setup working by following the steps at [URL] .... That part was really easy. I would like to make the process as automated as possible and then add Win7/10 to the system as well.
The first hurdle I've come across is the fact that netboot downloads everything off the repositories. This has the potential to use up a lot of bandwidth and I would like to avoid this if possible. The first idea I came across was to create a local mirror, this way not only will I be installing everything off the LAN but I'll also be getting all the updates for my systems off the LAN too. I wasn't too keen on this. The other option that I read about was to use the debian ISOs instead.
What I have tried is to copy the Debian ISO to /var/www/html/debian
Then, when my boot via the pxe, i set the option to manually select a repository and then i type in the IP address for my webserver for the address and type in /debian for the mirror directory.
However it breaks at this point. I get a message saying "Downloading a file failed"
I would prefer the as much of the install to come from the ISO as possible to keep bandwidth usage to a minimum.
For Win10, I read that I have to use an AIK to build the Winpe and then boot that. Then I can load the Windows10 ISO via nfs through Winpe.
pxelinux.cfg/default
Code: Select allroot@DHCP:/srv/tftp# cat pxelinux.cfg/default
UI menu.c32
TITLE PXE Test Boot
LABEL Debian 8
  kernel linux
  append vga=normal preseed/url=http://192.168.0.254/debian/preseed.txt initrd=initrd.gz --
LABEL Windows 10
  kernel ??
  append ??
LABEL HardDrive Boot
 Â
This is a preseed I have setup so far
Code: Select all#### Contents of the preconfiguration file (for jessie)
### Localization
# Preseeding only locale sets language, country and locale.
d-i debian-installer/locale string en_US
[Code] ....
View 0 Replies
View Related
Jun 10, 2011
I'm building a Debian based router, I want to add to this router a mail service function. I don't want mail to be sent outside of the network, what I want is the ability for services to send mail to the Debian server and for me to then pick them up from this server via pop3 into my normal mail application. Given I'm not looking for mail to be sent outside of the network and its strictly for services to log notifications via. What of the various mail applications should I setup? i.e. just looking for SMTP + POP3 internally.
View 5 Replies
View Related
Apr 21, 2011
Is there an easy way to add SATA drives to an existing system and have them m automatically at boot?So far I've been able to create a partition and format but they never mount at boot.What do I have to put in fstab so it will work?Also, since RAID doesn't work in Debian, is it possible to make two drives mount at the same folder
View 3 Replies
View Related
Apr 11, 2010
I tried to use debdelta for an upgrade, but it only worked with the main debian and security repositories, and did not work with the backports repository (which is where the largest files, specifically openoffice.org, are for my system). Is there a way to set up debdelta to be used with backports? I tried editing the /etc/debdelta/sources.conf file to include it, but this did not work.
View 2 Replies
View Related
Nov 29, 2009
I'm running Debian Lenny. I'm not pleased with kde4 so I'm going to be staying with Lenny. But I'm really looking to upgrade the old Openoffice 2.4 to 3.x. I've got the backports entry in my apt sources.list file. And I have downloaded the packages list. I'm just wondering if anyone else has installed the OO.o from backports? Does it work good and does it futz up anything from the stable install?
On a side, does anyone know where to get an updated Kopete. The version in Lenny is old and won't connect to Yahoo chat anymore (I guess they changed the protocol again.
These are really the only two reasons I messed with KDE4 anyhow. Kopete isn't a big deal because i can always use Yahoo messenger online anyhow, but really want to see how OO.o 3.x works.
View 5 Replies
View Related
Sep 3, 2015
I installed few days ago Debian Jessie (Linux server-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux) for some tests.I tried to install iptables-persistent with the command "apt-get install iptables-persistent".During the install process, I got the following message :
Code: Select allPreconfiguring packages ...
Selecting previously unselected package netfilter-persistent.
(Reading database ... 31677 files and directories currently installed.)
Preparing to unpack .../netfilter-persistent_1.0.3_all.deb ...
Unpacking netfilter-persistent (1.0.3) ...
Selecting previously unselected package iptables-persistent.
[code]....
Some talks about cups, acpid, ipv6 or systemd but nothing has solved the issue in my case.I used iptables-persistent many times with older debian versions.
View 6 Replies
View Related
Jul 24, 2011
I am trying to re size a drive but after a message of successful resizing, nothing changes !
This is original size
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/k9-root 322M 253M 53M 83% /
tmpfs 2.0G 0 2.0G 0% /lib/init/rw
udev 2.0G 204K 2.0G 1% /dev
tmpfs 2.0G 1.0M 2.0G 1% /dev/shm
/dev/sda1 228M 15M 201M 7% /boot
[Code]...
View 6 Replies
View Related
Mar 31, 2010
For the 2nd time in a year. I really need v3.xx because 2.4 breaks formatting when opening v3 files. Why did i go back to 2.4 ? 3.1 was slower with calc. Now I'm stuck with 2.4 because of the ongoing stupidity in backports.org.
# aptitude install openoffice.org -t lenny-backports
Reading package lists... Done
Building dependency tree
Reading state information... Done
Reading extended state information
Initializing package states... Done
Reading task descriptions... Done
The following packages are BROKEN:
[Code]...
View 2 Replies
View Related
Sep 22, 2010
If I install (say) Iceweasel from Lenny Backports, do I need to un-install the standard Lenny Iceweasel first, or will the new one overwrite/upgrade the old one? And- I understand pinning I think, but nobody explains what the * in the line:Package: * means. Does it mean all packages installed from the release specified in the line Pin: release a=lenny-backportsor do I need to specify each package in it's own entry (in /etc/apt/preferences)?
View 1 Replies
View Related
Sep 7, 2010
The Debian Project is proud to announce that the backports service, previously available at [URL].. is now an official Debian service and will be available from backports.debian.org Backports are packages from the testing distribution recompiled for the current stable (or even oldstable) to provide users of the stable distribution with new versions of some packages, like the Linux kernel, the Iceweasel browser or the OpenOffice.org suite, without sacrificing the general stability of the system.
The archive currently has packages backported for the Lenny distribution (how many?), but the infrastructure to accept packages for the upcoming Squeeze release is already in place, to allow Debian Installer images to configure the backports repository by default without generating errors on user systems. The service for Squeeze will be enabled at a later date, after the release.
Because of some limitations in the Debian Bug Tracking System, any bugs relevant to backported packages still have to be reported to the debian-backports list, which will now also move on lists.debian.org.
View 3 Replies
View Related
Sep 26, 2015
After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
View 0 Replies
View Related
Feb 16, 2010
I'd like to include the backports repo and the backports kernel in a live cd. I copied the debian-backports file from /usr/share/live-helper/examples/source to config/chroot_sources(as debian-backports.chroot and debian-backports.binary) and fixed the first problem (had to change "etch" to "lenny" in the files.)
View 3 Replies
View Related
Jun 1, 2010
I'm looking for correct backports repository for Lenny?
View 2 Replies
View Related
Apr 6, 2011
I tried to install nvidia drivers & when I tried aptitude update it says that 'backports.debian .org' Release file has expired ignoring......How long does it normally take to update?
View 5 Replies
View Related
Feb 1, 2009
If I use testing with the backports.org repository, will "apt-listbugs" work on any package I try to install from backports?
I'm not expecting to use backports a lot, but there may be a case where I need a newer version of a program, from unstable.
View 3 Replies
View Related
Apr 17, 2016
I update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:
Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table
I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.
And also something appears to have happened to the raid device since the update.
Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.
mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0
I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.
View 0 Replies
View Related
Oct 18, 2010
I see that the backports now is officiel. My question is rather simpel: Is it possible to upgrade with (and how to) the backported packages without to much work? Is is needed to install all backported packages individually? I want to upgrade to any backported package with the command:
apitutude safe-upgrade - if it is possible.
View 2 Replies
View Related
Apr 10, 2010
I'm new to Debian, but have used Ubuntu so I'm relatively familiar with APT. Ubuntu doesn't have backports, though, and I can't figure this out. I've checked the documentation for the answer, and I'm hoping that I'm just overlooking something simple.
I'm running lenny, and I want to install the Empathy instant messenger that's in lenny-backports (v. 2.26.2-1). I already have the stable package installed, and here's what happens when I try to upgrade:
michael@archimedes:~$ sudo apt-get -t lenny-backports install empathy
Reading package lists... Done
Building dependency tree
Reading state information... Done
empathy is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 118 not upgraded.
[Code]...
View 2 Replies
View Related
Feb 13, 2011
I just got Squeeze loaded on computer and getting several error message during boot up. Something about 368623 and 368761 PCI Bar 6 collision. This is a first for me on Debian OS. It happens so fast I can barely write it down. Is there a log I can access to see the entire entry?
View 14 Replies
View Related
