Debian Hardware :: Touchscreen On Asus Vivobook Q301 / Right Click Emulation
Jun 29, 2014
I am running debian testing, most functions seem to be working very well on this system!
Intel Core i5-4200U
Intel HD Graphics 4400
touchscreen works. (left click when tap, scrolling in compatible programs.)i have tried a few ways to emulate right click, but not working thus far. i would like to point out i am running lxde, i found one workaround i have not tried that uses gconf. URL...
# lspci -v
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
  Subsystem: ASUSTeK Computer Inc. Device 13ed
  Flags: bus master, fast devsel, latency 0
  Capabilities: <access denied>
[code]....
View 0 Replies
ADVERTISEMENT
Mar 15, 2011
i would like a combination of left and right mouse clicks to get me the same effect as the middle mouse does. when i first used the middle mouse button this stopped happening
View 5 Replies
View Related
Nov 13, 2010
i did some investigation and came accross mouseemu. however it seems like mouseemu is no longer part of the suse repositories. also its just available for ppcis there any way to have a behaviour like ctrl+click + rightclick?
View 8 Replies
View Related
Apr 6, 2010
how to get a right click emulation (ctrl+mouse1) working on my single button 1GHz G4 7455
View 5 Replies
View Related
Feb 18, 2010
I have a touchscreen (DELL model)which is working with windows xp (with windows drivers for touchscreen installed). but i want to use mandriva 2008 on the touchscreen, which requires drivers of mandriva 2008 only. I have been trying very hard but in vain.
View 3 Replies
View Related
Aug 19, 2010
I tried to install the easy way, the catalist driver. I used this page: SDB:ATI drivers - openSUSE When I clicked the link, yast asked for the root password. After ar reboot, no more desktop. Then I did init 3 adn startx ( it seems although I have no desktop, I am in runlevel 5)
xorg xserver 1.8.0
using config file: /etc/X11/xorg.conf
using config derectory: /etc/X11/xorg.conf.d
15 lines who only a slightly differ at the end.
[Code]...
View 9 Replies
View Related
Mar 19, 2011
I have xorg configured to enable middle button emulation:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
[code]...
View 1 Replies
View Related
Apr 5, 2011
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
View 1 Replies
View Related
May 20, 2014
I've just bought a new notebook and wanted to install Debian Wheezy. I bought an ASUS N550JV and since I installed Debian I've had a really bad time with Windows, UEFI boot loaders, GPT discs, touchscreens, nvidia, bumblebee, bluetooth and so on. After a few days, I've been able to boot Windows and Debian, however I'm quite unhappy with how Debian is handling the hardware.
Right now, my worst concern is the touchscreen. I don't really care whether it works or not but it is really messing with the OS. I installed Debian stable which comes with the 3.2.57 kernel. The touchscreen didn't work at all and I didn't really care until I run dmesg. Each 2 seconds I get spammed with the following text added to the dmesg output:
Code: Select all[Â Â 31.901696] xhci_queue_intr_tx: 74 callbacks suppressed
[Â Â 33.826890] usb 1-10: USB disconnect, device number 12
[Â Â 34.098270] usb 1-10: new full-speed USB device number 13 using xhci_hcd
[Â Â 34.116166] usb 1-10: New USB device found, idVendor=04f3, idProduct=010c
[Â Â 34.116176] usb 1-10: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[Â Â 34.116181] usb 1-10: Product: Touchscreen
[CODE]....
Uploading attachments to posts in this forum is resulting in an Internal Server Error. Here is the link to the image with the intermittent IOWaits:[URL]
View 0 Replies
View Related
Apr 1, 2014
I've got a problem with touchscreen (NNK Switches 5.7" model: FT-CU04B). It is not supported under Linux, but I managed to get it working with usbtouchscreen module, after some modifications of course. It gets recognized by system now, it is possible to calibrate it correctly through xinput_calibrator but it isn't possible to "left click with it". I know that it's weird so I want to make myself clear - touchscreen recognizes touch - when touching button for example, it reacts with "going down" but when I'm releasing button, it "goes up" again, without action. I've tried mapping left mouse button with xinput set-button map 1 0 0 0 0 0, but without success, buttons remain "unclickable".
lsusb:
Code: Select allBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code] .....
View 2 Replies
View Related
Sep 2, 2010
recently i got a very old laptop fujitsu fmv-680mc4 with celeron 800Mhz cpu and 256m ram.so i throwed away the hell-slow xubuntu 10.04 and put debian lenny on that machine.
everything worked smoothly(even the gnome environment!but why xubuntu with xfce always suck my cpu to its fullest?),only touchscreen did not.I've also got a copy of windows xp running on it,and touchscreen worked fine there.It's really hard to find a clue about the hardware specification(outdated,maybe deleted on their official website),I even don't know the model of the touchscreen.The only information i know is that it has a PS/2 interface and comes with an identifier 'PNP0F13' (as M$ windows hardware manager says). i remember stock 2.6 kernel do support some lifebook touchscreens,with modules compiled into kernel.But when i run cat /dev/psaux and touch on screen nothing happened(when i move the trackpad it did output some binary codes),and i move on "cat" the whole /dev/input folder but no luck still. Then i tried to modprobe some touchscreen modules in,but failed,nothing comes out from dmesg.
the question is: is there a way to get it to work(seeing binary code flow out of my console is also considered as "working")?does it need some "initialize magic code" to be brought into ready state?
View 5 Replies
View Related
Apr 29, 2010
I try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies
View Related
Oct 9, 2015
I am hoping to be able to get an old serial-touchscreen to work with a usb/serial adapter. I had this touchscreen working some years ago on different hardware. I would like to hook it to the machine I am setting up as a multimedia host with mythtv among other things.
Following the instructions I left behind when I got this to work way back when does not work. See [URL] ....
This info is a work around to get the xserver to see the touchscreen. [URL] ....
I do know that the touchscreen works as I am able to get garbage on the screen as in the first part of my howto. But I have not had any success getting xorg to see it. I wish I had posted a copy of the xorg.conf at the time, but......
There is an issue with the current xserver in testing that I am hoping the next update (in unstable) will fix when it gets pushed to testing. That is that Code: Select all# X -configure fails with a segfault. So I am not able to generate the xorg.conf needed to get it to work. I was going to post a bugreport, that is when I found out there is an update in unstable, so I am waiting for it to get pushed at the moment.
Anyway I am hoping that I can link /dev/ttyUSB0 to /dev/tty0 and get it to work. I would like some kind of guess as to my chances of success before I go to all the work of getting the monitor hooked to the host.
View 1 Replies
View Related
Jul 30, 2011
I'm trying to install smlnj 110.73 on a 64 bit lucid, and during installation, it complains of no 32-bit support.
Having zero knowledge of how 32-bit emulation is triggered in Ubuntu, all the leads I have to go on is this piece of shell script used by the installer to determine the architecture and emulation:
Code:
#
# on 64-bit linux systems, we need to check to see if the 32-bit emulation
# support is installed
#
if [ x"$ARCH" = "xx86" -a x"$OPSYS" = "xlinux" ] ; then
[Code].....
View 3 Replies
View Related
Apr 18, 2010
Dowloaded 10.04 beta 2 64 bit iso and was trying to install it into a VM. Upon boot however is comes up with something like "cant install it on your 32bit machine".
I'm fairly sure my laptop has a 64 bit architecture (for example, i have the "lm" flag when i cat the /proc/cpuinfo), so is there a way to convince VB that I have a 64 bit machine? unless there is a better way to find out if my CPU is indeed NOT 64 bit?
View 9 Replies
View Related
May 19, 2015
I've tried everything I was able to do alone but I can't figure why my laptop won't suspend. It just goes dark and wakes up again.
Here my /var/log/syslog from my last suspend attempt : [URL] ....
Code: Select all$ uname -a
Linux N550JV 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
(my PC runs on dual-boot with Windows )....
View 7 Replies
View Related
Jul 5, 2011
I currently know next to nothing about networks in Linux (yes I am working on that). I have just brought a Asus n13 wireless adapter after failing to get my laptop wireless working. I am using the 2.6.32-5 Debian squeeze kernel. The device connected once after I did the following:
apt-get update
modprobe rt2870sta
iwconfig
ifconfig wlan0 up
The device connected to wifi and was working fine. I then shutdown and rebooted to see if it would automatically connect on start up and now, although nothing seems to have changed and even after I repeated the steps above it did not connect. The network manager applet as well as listing the asus adapter(as ralink 802.11 WLAN) lists a Texas instruments PCI1410 pc card cardbus controller which i didn't before.
This is the output of iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"" Nickname:"RT2870STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:-39 dBm Noise level:-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon: .....
pan0 no wireless extensions.
This is lsmod | grep rt2:
rt2870sta 326811 1
crc_ccitt 1039 2 irda,rt2870sta
usbcore 98453 5 btusb,rt2870sta,uhci_hcd,ehci_hcd
View 10 Replies
View Related
Jul 16, 2015
I just installed a fresh install of firmware-8.1.0-amd64-netinst.iso. During installation the wireless setup utility located my wifi-network and upon entering my WPA password it said it was connected. It didn't work however so I plugged in my ethernet cable and continued the install process hoping it would magically start working after that. No luck.
I went from an Arch Linux install with working wifi, and I dual-boot my box with Windows 7 with working wifi, so I know it's not the card or the distance from the router.
View 1 Replies
View Related
Mar 20, 2016
There is no sound on my Debian notebook.I added myself to "audio" group and have "alsa-utils", "pulseaudio", and "firmware-linux" packages installed.
However when I try to play an audio file there is no sound regardless of volume settings.
Code: Select all386,0,0>pthfdr@SALAMAND:/media/pthfdr/SORCNYTH/Media/Audio/Disc 1$ play -V4 01.(I Can't Get No) Satisfaction.mp3
play DBUG formats: opening format plugin `lsx_alsa_format_fn': library 0xc3a680, entry point 0x7f9d270ea8e0
play DBUG formats: opening format plugin `lsx_amr_nb_format_fn': library 0xc3bde0, entry point 0x7f9d269e6690
play DBUG formats: opening format plugin `lsx_amr_wb_format_fn': library 0xc3cb80, entry point 0x7f9d265b81a0
[ode]....
View 10 Replies
View Related
Aug 11, 2010
I'm hoping some smart boffin around here could help me getting my asus xonar DX (PCI-e) working in debian 5. iv searched the net.
View 3 Replies
View Related
Jun 26, 2010
I have a GRUB2 USB multiboot setup. Plus I have a multiboot setup on my computer with Ubuntu 9.10, PCLinuxOS, Windows XP, and Fedora 13. The issue I'm having is different but the same. On my USB multiboot, Fedora will hang up on certain devices. Things such as touchpad, bluetooth, etc. On my PC it hangs up on first the bluetooth, then I unplug, then the USB hub, then the mouse and finally the external hard drive. It detects the devices but it freezes on detection. I did get this error before the device detection began:
Quote:
dracut; dracut-005-3.fc13
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
this is on the PC and the problem with the USB is that it will hang up when detecting devices.
View 1 Replies
View Related
Feb 15, 2010
I'm on Ubuntu9.10 with pulseaudio setup, everything works fine so far. But when I try to record my Desktop with xvidcap or recordmydesktop I'm unable to get the sound working.
xvidcap uses only OSS so I tried to setup the emulation by loading the kernel modules and adding the following lines to /etc/modules:
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
[Code].....
View 2 Replies
View Related
Oct 20, 2010
Is there an application that allows one to 'export' a drive or virtual disk image to firewire so that the machine at the other end sees the computer as a regular firewire drive? Apple computers can do that via their target disk mode (hold down t on boot), but I am searching for an application that would work under Windows or Linux.The goal is to boot an older Apple iBook, which can not boot from USB, via this emulated firewire drive.
View 2 Replies
View Related
Feb 4, 2011
I'm trying to get Apple II emulation up and running with xmess. I've been searching for info on how to do this and it seems like it should be fairly simple. I've downloaded the apple2.zip bios file and placed it in /usr/share/games/xmess/bios
If I run the following command:
Code:
I get this output
Code:
It seems that then I should be able to simply issue the following command and be off and running:
Code:
The emulator opens, I get a warning telling me to type OK and then get to a display that basically says this:
Typing anything gets me to a command line, but there doesn't seem to be anything there (not surprising based on the "---" on the previous screen). Typing "CATALOG" shows nothing.
Does anyone know how to use this emulator or has run into the same problem. I think that I'm doing things correctly, but it just doesn't seem to be recognizing the dsk file.
View 1 Replies
View Related
Sep 23, 2015
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info:
Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    Subsystem: ASUSTeK Computer Inc. Device 8437
    Flags: bus master, fast devsel, latency 0, IRQ 44
    Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code] ....
View 3 Replies
View Related
Jun 14, 2010
I don't get any sound with any version of Lenny on my new ASUS M4A785TD-V EVO motherboard. However the sound works fine when I boot from the Debian Live 60 Alpha1 AMD64 KDE DVD. I can always wait until Squeeze is released and then do an upgrade but I'd like to get the sound working now. Any suggestions?
View 3 Replies
View Related
Jul 11, 2010
I have installed debian testing squeeze, I have such issues, so no X11 working when startx
Code:
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
[code]....
how to make the X11 working ? I have the console but well X11 is better and needed for apps such as skype
View 5 Replies
View Related
Feb 24, 2010
How does one switch between command line and keypad modes when using the jed editor with EDT emulation?
OpenVMS User's Manual states that when using the EDT editor if the user wants to control EDT using the keypad, the mode needs to be set for keypad rather than command line input:
I am using:
with this .jedrc file:
Using the -batch shows that the .jedrc file is correctly located.
View 1 Replies
View Related
Apr 5, 2011
I am trying to use one serial port simultaniously for two different programs. I have a two programs that use GPS information that I would like to run at the same time. At this time only one program at a time can access a serial port. I have found a way to emulate this in Windows so that I can have both running, now I'm trying to do the same in Ubuntu. Is it possible? If yes, How? The GPS receiver is connected via a USB port.
View 1 Replies
View Related
Nov 23, 2010
I have problems,I get this:
milenko@hp6830s:~/mt2ddi$ make mt2ddi
f77 -o -m64 driver.o solve_mt2d_direct.o boem.o rotz.o gebolr.o d2emod.o pobo.o mte.o d2hmod.o gsres.o mth.o z1idu.o h1iud.o phase.o
[code]....
View 4 Replies
View Related
