General :: ALSA OSS Emulation Won't Work?
Feb 15, 2010
I'm on Ubuntu9.10 with pulseaudio setup, everything works fine so far. But when I try to record my Desktop with xvidcap or recordmydesktop I'm unable to get the sound working.
xvidcap uses only OSS so I tried to setup the emulation by loading the kernel modules and adding the following lines to /etc/modules:
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
[Code].....
View 2 Replies
ADVERTISEMENT
Sep 15, 2010
I'm under Ubuntu 8.04 LTS Hardy Heron using pulseaudio. I've got 2 soundcards : one internal AC97 7.1 without midi (card 0 in ALSA) and a PCI C-MEDIA 2.1 with OPL3 midi (card 3 in ALSA) I have sound in most ALSA or OSS applications with full 7.1 + 2.1 duplex. I have MIDI playback in any ALSA MIDI players (client 29:0 in ALSA).
I'm trying to run Final Doom for W95 on WINE with OSS driver. I have sound effects but no MIDI music. I tryed with padsp and aoss wrappers. I know I can use ALSA driver in wine or timidity, but I would rather use padsp + hardware MIDI if possible. How do I configure ALSA OSS emulation for MIDI playback and check that it's working ? I tryed playmidi but whatever I told it, it couldn't find any midi device.
View 2 Replies
View Related
Jan 28, 2010
I'm running Debian (both Sarge and Lenny, on different systems) under Gnome and have a number of thin client workstations that connect to a software application on an AIX server. I'm using gnome-terminal to provide terminal emulation for this software. Unfortunately, the emulation leaves something to be desired, and doesn't catch all of the F keys properly. It seems F1-F4 act as some form of escape key, exiting out of the software back to the command line, when they should be performing different functions in the software. F5 and F6 work as they should in the emulation. Is there a setting I can apply to my gnome-terminal launcher that will make this behave like it I want? The terminal should ideally match the behavior of a Link MC5 terminal (we have some of these old beasts still around, still crunching away), but alas, I don't know how to implement this.
View 2 Replies
View Related
Apr 3, 2011
I tried to uninstall ALSA and install OSS4. But it seems that ALSA was not the issue. Anyway:
I don't know how to reinstall alsa. I'm using Debian Squeeze(stable).
Tried this code...
cannot open mixer: No such file or directory
View 2 Replies
View Related
Oct 20, 2010
Is there an application that allows one to 'export' a drive or virtual disk image to firewire so that the machine at the other end sees the computer as a regular firewire drive? Apple computers can do that via their target disk mode (hold down t on boot), but I am searching for an application that would work under Windows or Linux.The goal is to boot an older Apple iBook, which can not boot from USB, via this emulated firewire drive.
View 2 Replies
View Related
Feb 24, 2010
How does one switch between command line and keypad modes when using the jed editor with EDT emulation?
OpenVMS User's Manual states that when using the EDT editor if the user wants to control EDT using the keypad, the mode needs to be set for keypad rather than command line input:
I am using:
with this .jedrc file:
Using the -batch shows that the .jedrc file is correctly located.
View 1 Replies
View Related
May 27, 2010
I am trying to use the free program Putty for emulation , I use Reflection before , Reflection use unixlink as protocol to download , but this protocol is not in Putty I tried sz is also not work , if I want to download files via Putty , what protocal that I can use ?
View 3 Replies
View Related
Mar 6, 2011
I'm having some trouble getting ALSA working on my system. I had been using OSS for awhile but decided to move to ALSA after a kernel upgrade. ALSA worked fine except for the tedious chore of having to run alsaconf everytime I booted up. I was getting errors message for OSS during boot up telling me OSS modules weren't loading properly and linux-headers needed to be installed to get it to work properly again. I ended up installing the linux-headers later due to some nvidia driver fiddling. My system has now reverted back to OSS and I can't seem to get ALSA to work at all. I have libasound2, alsa-base, alsa-utils and alsa-oss installed and alsaconf says no ALSA modules are loaded. I've been searching around and haven't found how to get rid of OSS to install ALSA properly.
Distro: Debian Lenny
Kernel: 2.6.26-2-686
Sound Card: Creative Labs SB Audigy
OSSv4.1
ALSAv-current packages according to synaptic
View 9 Replies
View Related
Mar 16, 2016
Debian 8.3 has no sound. Removing/reinstall pulseaudio/alsa-base had no dice.
There was no "alsa force-reload" command on this Debian system.
Detailed info about this alsa: [URL] ....
The sound system was normal (music can be heard) on this pc if installed ubuntu 15.10, here is detailed info about alsa on ubuntu: [URL] ....
Error occurred in both aplay and speak-test:
Code: Select allaplay -D hw:PCH,0 06.wav
Playing WAVE '06.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: pcm_write:1939: write error: Input/output error
Code: Select allaa@de:~$ speaker-test -D plughw:PCH,0 -c 2
[Code] .....
Should(How can) I compile/upgrade alsa to the latest version?
View 1 Replies
View Related
Dec 29, 2010
I am having problems getting sound to work. I have pasted my output from AlsaInfo.sh in hopes that someone can assist me. I have been able to fix this with the AlsaCompile scripts for Ubuntu. I am wondering if this is a distro related issue. If not I will gladly send to the alsa project.
[url]
- One sidenote that I will mention is the fact that I DO HEAR SOUND from the following command (and only this command)
Code:
View 5 Replies
View Related
May 10, 2010
trying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
View 5 Replies
View Related
Sep 2, 2009
I'm using F11, KDE4. I have uninstalled Pulseaudio as it's unusable for my configuration (2 souncards, one of them a M Audio Delta 66). In order to not have Phonon blocking my M Audio Delta 66 card I need to use DMix. The built in ALSA dmix support doesn't show up in Phonon (System Settings -> Multimedia -> Device Preference) but I found out after some research how to add your own dmixer in the ~/.asoundrc file. Here are a few links:
http://noneus.de/?p=50
http://ptaff.ca/ptaffgnu/2009-07/124...dmix_et_phonon
http://amarok.kde.org/wiki/Setting_up_Dmix_for_ALSA
http://alsa.opensrc.org/DmixPlugin#7...e_ICE1712_chip
https://bugzilla.redhat.com/show_bug.cgi?id=474259
[Code]...
It might depend on the way it tries to access this device. When you hover the "DMixer" device it displays it will try the following devices: 1. ALSA: dmixer I think it should rather be ALSA: plug:dmixer But I can't figure out where you are able to configure this, does anyone know? I also wonder how I can remove the Pulseaudio entry in phonon. This is not important but still though PA is uninstalled. There is a Remove button but it's always disabled.
View 1 Replies
View Related
Mar 20, 2011
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
View 5 Replies
View Related
Oct 16, 2010
I have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
View 9 Replies
View Related
Nov 19, 2010
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
View 1 Replies
View Related
Jan 22, 2010
I have been experiencing this peculiar issue with Ubuntu 9.10. Whenever the system boots, the audio doesn't work but when I do a 'sudo alsa force-reload', the volume icon gets muted and on unmuting it the audio works. This is the information regarding the audio device I get on doing lspci
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
View 6 Replies
View Related
May 26, 2010
How can I make terminal applications immune to terminal emulator close, but still able to use all virtual terminal features?
egin{UPDATE}I want my terminal application remain alive and accessible if I accidentally close terminal emulator. This functionality is provided by screen and tmux, but they have issues with colors and they flush screen.Yes,I can run the shell inside screen, but I do not want the shell remain alive unless there is some other program running.
end{UPDATE}I see this must be something like screen, but without VT100 terminal emulation, something which will just apply whatever application does with "terminal proxy"'s terminal (like outputting something to stdout/stderr or using stty to set terminal options) to the terminal this proxy runs in.
// I know about screen and altscreen on, but it makes either this (screen with TERM=screen):
or this (screen with TERM=rxvt-unicode):
while I want this (rxvt-unicode without screen):
I have figured out that everything looks fine if I compile rxvt-unicode with USE=-xterm-color (in fact vim looks like on the second picture even without screen if I add this USE flag) and set TERM=screen-256color, but I do not like this workaround because it actually changes colors and I can't be sure that it will always change them only this way:
View 4 Replies
View Related
Jul 30, 2011
I'm trying to install smlnj 110.73 on a 64 bit lucid, and during installation, it complains of no 32-bit support.
Having zero knowledge of how 32-bit emulation is triggered in Ubuntu, all the leads I have to go on is this piece of shell script used by the installer to determine the architecture and emulation:
Code:
#
# on 64-bit linux systems, we need to check to see if the 32-bit emulation
# support is installed
#
if [ x"$ARCH" = "xx86" -a x"$OPSYS" = "xlinux" ] ; then
[Code].....
View 3 Replies
View Related
Apr 18, 2010
Dowloaded 10.04 beta 2 64 bit iso and was trying to install it into a VM. Upon boot however is comes up with something like "cant install it on your 32bit machine".
I'm fairly sure my laptop has a 64 bit architecture (for example, i have the "lm" flag when i cat the /proc/cpuinfo), so is there a way to convince VB that I have a 64 bit machine? unless there is a better way to find out if my CPU is indeed NOT 64 bit?
View 9 Replies
View Related
Jun 26, 2010
I have a GRUB2 USB multiboot setup. Plus I have a multiboot setup on my computer with Ubuntu 9.10, PCLinuxOS, Windows XP, and Fedora 13. The issue I'm having is different but the same. On my USB multiboot, Fedora will hang up on certain devices. Things such as touchpad, bluetooth, etc. On my PC it hangs up on first the bluetooth, then I unplug, then the USB hub, then the mouse and finally the external hard drive. It detects the devices but it freezes on detection. I did get this error before the device detection began:
Quote:
dracut; dracut-005-3.fc13
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
this is on the PC and the problem with the USB is that it will hang up when detecting devices.
View 1 Replies
View Related
Feb 4, 2011
I'm trying to get Apple II emulation up and running with xmess. I've been searching for info on how to do this and it seems like it should be fairly simple. I've downloaded the apple2.zip bios file and placed it in /usr/share/games/xmess/bios
If I run the following command:
Code:
I get this output
Code:
It seems that then I should be able to simply issue the following command and be off and running:
Code:
The emulator opens, I get a warning telling me to type OK and then get to a display that basically says this:
Typing anything gets me to a command line, but there doesn't seem to be anything there (not surprising based on the "---" on the previous screen). Typing "CATALOG" shows nothing.
Does anyone know how to use this emulator or has run into the same problem. I think that I'm doing things correctly, but it just doesn't seem to be recognizing the dsk file.
View 1 Replies
View Related
Apr 5, 2011
I am trying to use one serial port simultaniously for two different programs. I have a two programs that use GPS information that I would like to run at the same time. At this time only one program at a time can access a serial port. I have found a way to emulate this in Windows so that I can have both running, now I'm trying to do the same in Ubuntu. Is it possible? If yes, How? The GPS receiver is connected via a USB port.
View 1 Replies
View Related
Nov 23, 2010
I have problems,I get this:
milenko@hp6830s:~/mt2ddi$ make mt2ddi
f77 -o -m64 driver.o solve_mt2d_direct.o boem.o rotz.o gebolr.o d2emod.o pobo.o mte.o d2hmod.o gsres.o mth.o z1idu.o h1iud.o phase.o
[code]....
View 4 Replies
View Related
Jan 23, 2010
What is the purpose of SCSI emulation for IDE devices?
View 2 Replies
View Related
Mar 19, 2011
I have xorg configured to enable middle button emulation:
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
[code]...
View 1 Replies
View Related
Jan 7, 2010
After upgrading from OS11.1 to 11.2 I am annoyed by the fact that no configuration options exist any more to customize for my mouse. This is a 2-button trackball very ergonomic for people. that are prone to have RSI problems like me, a real solution.
Before in 11.1 I could use Yast to set up X that it would emulate a scrollwheel with the right button. Unfortunately now with 11.2 all has to be recognised automatically and they simply threw out the mouse configuration in Yast, leaving us with some useless console mouse configuration. Not every upgrade means an improvement, which seems very much like ....
Could somebody help me or give me pointers what is the procedure to recover this emulated scrollwheel functionality? I know it has to do with xorg.conf, but I don't have that file and without this good start it will be difficult for me to get anywhere. How is this file re-created?
View 2 Replies
View Related
Mar 15, 2011
i would like a combination of left and right mouse clicks to get me the same effect as the middle mouse does. when i first used the middle mouse button this stopped happening
View 5 Replies
View Related
Jun 29, 2014
I am running debian testing, most functions seem to be working very well on this system!
Intel Core i5-4200U
Intel HD Graphics 4400
touchscreen works. (left click when tap, scrolling in compatible programs.)i have tried a few ways to emulate right click, but not working thus far. i would like to point out i am running lxde, i found one workaround i have not tried that uses gconf. URL...
# lspci -v
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
  Subsystem: ASUSTeK Computer Inc. Device 13ed
  Flags: bus master, fast devsel, latency 0
  Capabilities: <access denied>
[code]....
View 0 Replies
View Related
Jun 10, 2009
Server has DQ35JO board, 8GB memory, multiple SATA hard drives. It was happily running Fedora 10, and Fedora 9 before that. I downloaded and burned the F11 DVD, booted it, did an install which is:
-- delete the LVMs
-- create a 200 MB /boot on ext3, the rest of /dev/sda on ext3 as /
-- reformat the swap partition on /dev/sdb1
-- leave the other file systems alone (they are all ext3)
I chose no optional packages and let it install. It finished normally and got to the "click to reboot" screen. Now, my server is completely bricked. When I power it up I get a blank screen with a blinking cursor. I cannot even get to the BIOS, or boot my Fedora DVD, much less boot the boot drive.
View 6 Replies
View Related
Mar 17, 2011
I'm trying to update ALSA, following the instructions here: SDB:Alsa-update - openSUSE.I'm not sure how to proceed at STEP THREE. There are two sets of instructions, based on whether or not the kernel has been updated. I'm not sure if it has been. How can I make sure?
View 2 Replies
View Related
