i did some investigation and came accross mouseemu. however it seems like mouseemu is no longer part of the suse repositories. also its just available for ppcis there any way to have a behaviour like ctrl+click + rightclick?
View 8 RepliesI am running debian testing, most functions seem to be working very well on this system!
Intel Core i5-4200U
Intel HD Graphics 4400
touchscreen works. (left click when tap, scrolling in compatible programs.)i have tried a few ways to emulate right click, but not working thus far. i would like to point out i am running lxde, i found one workaround i have not tried that uses gconf. URL...
# lspci -v
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 13ed
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
[code]....
I have a touchscreen (DELL model)which is working with windows xp (with windows drivers for touchscreen installed). but i want to use mandriva 2008 on the touchscreen, which requires drivers of mandriva 2008 only. I have been trying very hard but in vain.
View 3 Replies View RelatedHad it working in Ubuntu and now Ive switched to openSUSE and loving it! Much better than Ubuntu. But I cant get the touchscreen working. Please help...Ive tried to get it working but assume I have done nothing please. Im semi-intelligent when it comes to linux but most of my experience has come from Ubuntu.Im kernel 2.6.34-12 and using openSUSE 11.3 (32 bit)
View 3 Replies View Relatedwhere can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies View RelatedI am trying openSUSE 11.3(KDE desktop) for the first time (also my first time with a linux OS). But i am trying to install the EgalaxTouch driver to get my touchscreen working. I have tried all the things from this topic: openSUSE 11.3 and eGalax TouchScreen but everytime i try to run the install.sh i get these errors no mather if i am directly logged in as root or using sudo in my command line:
I am busy from monday installing all kind of touchscreen drivers but they all won't install propperly (just like the original drivers they need the Xfree86-devel but i can't find it for openSUSE).
Had a heck of a time getting the Acer T230H touchscreen monitor to work on OpenSuse 11.2. I am documenting this for anyone else looking to get this working.
There are plenty of sites out there with information on getting this working on Ubuntu but none specific to OpenSUSE.
PREREQUISITES:
Make sure xorg-x11-driver-input is installed as need the evdev driver in /usr/lib/xorg/modules/input/.
Code:
1. Download and compile the 2.6.34.1 or higher kernel from The Linux Kernel Archives. See instructions here for compiling kernel.
When you run make menuconfig be sure to module"Quanta Optical Touch". Navigate to Device Drivers:HID Devices:Special HID Drivers:Quanta Optical Touch. Put a "M" for module.
Save config file and build kernel as per instructions in link above. hid-quanta.ko driver should be located in /lib/modules/2.6.34.1/kernel/drivers/hid/ if module was installed correctly.
2. Once you build the kernel and boot up with the new kernel follow the instructions below:
Edit /etc/udev/rules.d/69-touchscreen.rules
Add the following rules at the top:
Code:
Create or modify /etc/X11/xorg.conf with the following info:
Code:
If this is good you can test your touchscreen which should now be working. Be sure evdev driver is specified in xorg.conf and not hidtouch.
I'm running OpenSuse 11.1 with a Dell Inspiron 6400. I just bought a Medion Multi-Touchscreen-Monitor cos they were going cheap at the local supermarket. It says the touchscreen works with Windoze 7 only, but I thought its worth a go as I have 30 days to try before taking it back.
The monitor output works fine. I had to adjust the resolution setting but that's okay. However, when I plug in the touchscreen usb lead I've no success yet. I tried all the touchscreen Vendor/Name options in Yast->Hardware->graphics card/monitor but to no avail.
My dmesg output is:
Quote:
usb 4-1: new full speed USB device using uhci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
usbhid: timeout initializing reports
[Code]....
Is there an way to activate the touchscreen functions of this monitor in opensuse 11.2
View 2 Replies View RelatedI try to configure mouse click interval since a single click is recognized as double click by doing it from KDE mouse configuration in system settings; but my attempt doesn't work even (I set the click interval to 2 sec, but doesn't change anything). What is the best way to do this in slackware?
View 4 Replies View RelatedI have an OpenBSD server and I access i'm trying to access it via serial port with a Opensuse computer. I have been using Minicom but its 2 emulation types (vt102 and ANSI) Dont seem to be working for me. Is there a terminal emulator for linux that supports wyse50? That would be best.
View 4 Replies View RelatedI opened KPackageKit in my new Fedora system. I want to get wine. The description says "A Windows 16/32/64 bit emulator". But wine stands for Wine Is Not an Emulator.
View 2 Replies View RelatedI'm newish to the forum, but have been using ubuntu for the past few months.I recently upgraded from eeebuntu (a 9.04 derivative) to 10.04, and found that two finger tapping my touchpad has gone from middle click to right click, (and 3 fingers is now middle instead of right).
From what I've seen, this has been changed since 9.10, but I haven't been able to find a permanent solution yet. Most fixes have been from before and use hal, or other things that don't exist anymore. The one thing I've found does work is using xinput and the command
Code:
xinput set-prop "ETPS/2 Elantech Touchpad" "Synaptics Tap Action" 2, 3, 0, 0, 1, 2, 3
But that has to be run every time I start up, and it occasionally reverts while I'm using the computer. I've tried making a script that runs at startup, but neither adding it to the list of startup programs, or autostart folder has worked, but running the script file manually does work. I'm a bit at wits end with this, it's the only issue I've had with 10.04, and I've spent many many hours trying to get it to work (I've also tried gsynaptics and the newer version whose name escapes me right now). Hopefully there's a permanent fix out there.
when i click my mouse on something, it sometimes registers as two clicks. it doesn't happen all the time, but frequently enough to be annoying. for example, when i click a videos video to pause it, it often opens into fullscreen (which you normally click twice to do). also, in the url bar of chromium, i can't select the entire url by clicking. i now need to use ctrl+a. that's also because when i try to select the url, the highlight randomly disappears.
if i have multiple windows open, my click on the first "x" of the top-most window also closes the next window. i'm on linux mint 10. it's not really important, but it drives me crazy sometimes when my mouse doesn't work the way i want it to.
About a week ago I installed some updates. What they were I don't remember. After I did that my mouse started acting up. Now about half the time when I single click it registers as a double click. Also when I click and drag to select text anywhere it'll randomly do another click screwing up that process.
So far I think the problem is when I press the left mouse button it registers the left click and then when I release, it randomly registers another left click.
The mouse itself works fine if I take it to another PC that's using windows.
OS: Ubuntu 9.10 64bit
Mouse: Microsoft Intellimouse 3.0
mouse menu different in 10.10, is there a way to make the mouse single click instead of double click?
View 2 Replies View RelatedCode:
linux-uitj:/home/anisha # uname -a && cat /etc/*release
Linux linux-uitj 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux
openSUSE 11.2 (x86_64)
VERSION = 11.2
If I normally click the Trash icon either in Kmail or in Evolution more than one mail gets deleted in a sequential order! I have to press the click button extremely light to avoid this problem. I have confirmed this problem is not only with the Email clients but even with most other normal applications too. I have changed my mouse twice but the problem persists. Both were USB mice. Below I have provided log information :
Code:
linux-uitj:/home/anisha # dmesg | grep usb
[ 0.138267] usbcore: registered new interface driver usbfs
[ 0.138267] usbcore: registered new interface driver hub
[ 0.138267] usbcore: registered new device driver usb
[ 0.396952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.396956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.396958] usb usb1: Product: EHCI Host Controller
[Code]....
For some reason now when I left click slackware sees it sometimes (4 out of 5 times) as a double click. This is very frustrating? Here is a list of ps aux
Code:
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.1 0.0 824 276 ? Ss 12:39 0:01 init [4]
[code]...
After I adjust my slackware and rebooted I saw a strange "rectangle" on my desktop. Please, look at the screenshots below and tell me how I should solve this problem.
I can't move it. Right-click menu on a rectangle coincides with a right-click on desktop. It does not prevent, but very annoying.
Ubuntu 10.04 LTS has no immediately apparent way that I can see for changing the mouse behavior from the default double-click to single-click. There appears to be some type of kludgy, but unsatisfactory fix for this unwanted behavior in the Accessibility-option, under Mouse-Preferences.
View 5 Replies View RelatedI have an eGalax touchscreen which I installed using the xserver-xorg-input-evtouch package. Now touching the screen makes the mouse pointer move in all sorts of random directions.
What I want, of course, is for the mouse pointer to move to the point where I touched the screen. Typically this is called 'calibration'. Maybe there's a program to run or something, but I can't find it. how do I calibrate my touch screen?
I'm running Jaunty 9.04 so there is no 'System -> Administration -> Calibrate Touchscreen' program.
You have probably seen the TV shows and films with the law enforcement agency, or the team at "Leverage" have a large screen with other side screens.
I don't have a holographic display, or even a 60" touchscreen, but I do have a TV, and a couple of computers running 10.10 and 11.04.
What I would like to do, using a mouse instead of a touchscreen, is "push" photos, videos, or dossiers on enemy agents to another screen or phone.
I would imagine it to be something along the lines of hot zones on the desktop, so that if I flick an item to, say, the right of the screen, it will leave my desktop and pop up on the desktop of the (networked, but separate and different) computer to my right, and if I drag / flick an item to the top centre it will Bluetooth it to my phone (which I'll set up to automatically accept any files from "my.desktop.homelan".
I had something a little similar with, I think, Compiz, in that if I flicked an item to the right it would dump it onto virtual desktop 2 (of four horizontal ones).
What search terms would I use in Google or Ubuntu Help to get me started? I can compile, but I'd rather not, as I'm not very good at it, and I can edit .cfg files as long as there are plain English descriptors ("Enable_Feature_Foo=1" "Fave_Place=/home/Me/fave/" etc).
The problem is the touchscreen is acting like a mouse. The cursor doesn't go to where I touch, it just moves around just like a normal mouse.
This Xorg.0.log shows this about the TouchScreen
Code:
(II) XINPUT: Adding extended input device "USB Touchscreen 595a:0001" (type: TOUCHPAD)
(**) USB Touchscreen 595a:0001: (accel) keeping acceleration scheme 1
(**) USB Touchscreen 595a:0001: (accel) filter chain progression: 2.00
(**) USB Touchscreen 595a:0001: (accel) filter stage 0: 20.00 ms
[Code]....
the lsmod output tells me that the usbtouchscreen isnt being used by anything.
How to get a older crt touchscreen working. I need it to work for a handicapped child. When I check the device it seems slackware detects it as a mac emulation mouse and I installed egalaxy drivers. It seems something is right, when I touch the screen the cursor goes to the right top corner and moves a bit when touching the screen.
View 5 Replies View RelatedIve noticed this in 2 places specifically.The first is when I try to open the only "tarball" program Ive ever tried to install, Celtx. I unpacked the program into my bin folder, and when clicking (or double clicking) on either the executable file or the shell script nothing happens. If I double click on shell script, and then on the executable, I get an error saying "celtx is already running but not responding. To open a new window you must first close the existing celtx process, or restart your computer".
The second time is when I get a notice on my screen about new security updates available.I click on it, and it opens up the "software update" window with the updates it wants to nstall already checked. I click "install updates" and nothing happens. If I click the help button, it gives me an error "failed to execute child process "gnome-help"". Im guessing this one is because Im not using gnome, but XFCE. If I open up online update using yast, I can update from there and install these files fine.So basically the second problem is not that big of a deal, since Im able to install the files from a different area. Its just annoying and I dont know if it means there is a deeper bug in my system. The first problem makes me unable to run a program I really wan to run, so thats the one I really need the most help with.
I upgraded the KDE version on a new installation of 11.1 on another computer and everything went fine. But today I tried upgrading my computer from 4.2 to 4.3.5 with the one click installer, and in addition to having many dependency issues that I thought I got figured out, everything is messed up on my desktop. I still have the 4.2 panel, and my background is messed up (the background I had set has been replaced with a checker pattern), the lizard icon for the application menu is just a grey circle with a play button, all of my icons and my desktop folder that used to be on the desktop are gone, and nothing is showing in the system tray.
View 4 Replies View Relatedhow can I disable the touchscreen tapping on F12?
View 2 Replies View RelatedDoes Fedora supports Touchscreen computers? I am planning buy a new desktop computer and there are several models that come with touchscreen, I don't really care about this feature , I just want to know if Fedora can operates under a touchscreen system. If Fedora doesn't support touchscreen systems, Is there any plan to integrate this option in a near future?
View 1 Replies View RelatedI am trying to get my 3M touchscreen to work in Ubuntu. Presently, I have the usbtouchscreen module loaded -- which results in touches being recognized, but the y-axis is backwards (ie: if I press at the top, it shows up at the bottom). Given that hal is depreciated, the only place I could note for configuration options the xorg.conf.d directory. But, I'm unsure what needs to be added there.
Additionally, I am confused over usbtouchscreen vs evdev vs evtouch -- which is supposed to be used at this point?
Ok, some system info:
I am running Ubuntu 10.04
[Code]....
since Ubuntu 9.04 I try to get my USB-Touchscreen from Faytch running. With some changes in the setup.sh of the drivers that can be downloaded from faytech.de I finally got it running under 9.04. Changes I made were blacklist path and since no xorg.conf exists anymore I started with a 8.04 Live-CD and copied the xorg.conf from there. not nice but worked. Now with 10.04 new drivers are available but (still only for 8.04). Did the same hack with the xorg.conf (blacklist path was already updated). So the driver and touch stuff works even without any driver whenever I hit the touch screen (anywhere / even in the middle) I always get a mouse click in the top left corner. and that keeps on even after installing the driver.
So without driver I get a click in the upper left corner and with driver installed and calibrated I get a click where I have my finger on the screen (that is what I want) AND a click in the upper left corner (THAT IS WHAT I NOT WANT). I think Ubuntu recognizes the touchscreen as a kind of "unspezified" input device and does a click whenever a touch-event occurs. How can I deactivate that behavior without disabling all the USB??