Just did an upgrade in Wheezy and found my synaptics touchpad borked. Easy enough fix, though.aptitude install xserver-xorg-input-synaptics-devRebooted (probably could have just modprobed) and all is wellSo, I guess the standard xserver-xorg-input-synaptics is undergoing some weird changes at the moment.
View 1 RepliesI suppose this thread has been created over a hundred times in the history of this forum, but yet it seems like I cannot find any solution to it. Nor has the Debian IRC-channel been able to channel the requiered information to me so I'm comming here as sort of a last resort.So my issue is that, as described in the topic, none of the settings I set in /etc/X11/xorg.conf have any effect on the touchpad. Other settings in xorg.conf such as color-depth for the screen and driver for the graphics card have effect but not the touchpad section. And if I make a syntax-error in the xorg.conf file X doesn't want to start, which is a clear indication that it's using that config file.
View 3 Replies View RelatedI'm having some trouble with my synaptic touchpad. Actually I think it is kind of working (I only use the trackpoint) but it gives me these nasty errors in Xorg log. I'm running Debian squeeze with 2.6.32-5-686 and Xorg 7.7
I've read some posts concerning touchpads (click) and the links within, but nothing seems to help or I'm doing something wrong. Hope you can bring some light to my darkness. Here some infos (I've renamed some files to .txt to ensure that they will be displayed in the browser): Xorg.0.log /etc/udev/rules.d/66-synaptics.rules xorg.conf /proc/bus/input/devicesCan someone tell me why the touchpad cannot be found by X? I already tried various configurations but nothing solved my problem so far.
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.
Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attached? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
Since my upgrade from Debian 7.8.0 to Debian 8.0
Happy to get a lot of my computers now working fine with Debian 8 ...
This one embed a Silicon Integrated Systems Video card [1039:6330]
This computer with an Athlon 64 2800+ and 1GB of DDR RAM, destined to be a BOINC worker until the end of his life, had the chance to upgrade with a Debian 7.8.0 (LXDE) few times ago (after long years of Windows XP services). And the only thing I had to set was the wireless card (firmware-b43-installer, adduser me netdev, and it was good) and it was perfecly working. Apt-get was giving to me creepy old versions of software, so it was the only thing that disturbed me, but let's go for the brand new Debian 8.0
But now with Debian 8.0, the graphics are bad, resolution is bad too.
I first tried with "lightdm" and "mate-desktop-environment" because of the LXDE icons that were fine on every computer with 7.8.0 but distorted and cropped with Debian 8 on every computer too (how is it simply possible for the mainteners to find it ok ). Seeing that my SiS card was not working well, I tried to reinstall everything with Debian 8 and LXDE as before... and hope icons will be repaired soon. But the problem with my video card is still present.
Then, I realised that on my Debian 7.8.0 computers, xserver-xorg-video-sis is available and installed. But not available anymore on Debian 8.0
I installed the debian 6.0 netinstall iso, now installing the xserver-xorg but get a lot of this error messages:
xserver-xorg-video-rendition: Depends: xorg-video-abi-6.0 which is a virtual package.
I have Lenovo 3000 n200. I'm new in debian, but it's great to me! I wan't to stay with this distro, but i Can't upgrade this to testing or unstable version. Lenny have too old packagges for me. All versions of squeeze (downloaded or upgrade from lenny) is broken. I can't run xorg. For about 2 weeks i'm serching for answer and i only found that this is xserver-xorg-conf. That's true this is the package that is broken, but cannot install this.
When i upgade system the synaptic package manager write me one package is broken (xserver-xorg-conf), so i delete it and install one more time. This same problem. So i downloaded and i have this same problem. When i restart system i cannot run xserver and gnome.
I experienced this problem on Friday but didn't have time to write a warning.A couple of days ago, xserver-xorg-core 2:1.10.2-1+b1 reached Testing before a corresponding dependency (recommendation), thus breaking the hardware acceleration. The issue is (better) described here (1) by a developer.A possible solution is to keep (2) the previous version (2:1.10.2-1) or, if you already installed the faulty one, to grab the former version from Debian Snapshots (3) and downgrade the package.Because the error was a simple path change, one could also keep the new version of xserver-xorg-core and link the DRI Mesa modules to the directories that are inspected now (as described here [4]).The issue has already been addressed (5) and a new version should appear in Testing shortly.[URL]
View 8 Replies View RelatedI am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove): subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
I'm trying to get the source package xserver-xorg-video-ati. My sources.list looks like this:
[Code]...
How can I install xserver-xorg without all the unnecessary drivers for video cards / peripherals I do not have on my system?
View 2 Replies View RelatedI have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attachedDebian_error_msg.png? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
View 1 Replies View RelatedWhen I reboot, and check "synclient -l" all the options except the last two ("VertTwoFingerScroll","HorizTwo FingerScroll") are configured the way I made it. These keep getting reset to zero and I tried adding this snippet to the end of files in /usr/share/X11/xorg.conf.d but to no avail.If I do "synclient VertTwoFinger Scroll=1" then it my two finger scroll works, but I want it to be permanant. Anyone have a clue why it keeps going back to 0?
View 3 Replies View RelatedWhen I put sudo dpkg-reconfigure xserver-xorg into terminal then hit the return key it asks for my password which I put in, it then seems to do nothing it doesn't open the xserver page to make any changes.
View 9 Replies View RelatedI need a video driver for SIS M760GX for an ACER Aspire 5000 laptop.
Everywhere I've looked it says to run
sudo dpkg-reconfigure xserver-xorg
Supposedly, this is supposed to open a window where I can change settings. However it does nothing and just returns me to the prompt.
PROBLEM: My computer has an nvidia video card. I'd like to remove the packages that support ati and radeon. When I try to remove xserver-xorg-video-ati or xserver-xorg-video-ati, the package manager wants to remove xserver-xorg-video-all.
QUESTION: Is it safe to remove xserver-xorg-video-all? Obviously, I want to keep support for my nvideo card.
ive been having trouble with my nvidia driver, so i ran "sudo dpkg-reconfigure -phigh xserver-xorg" in tty(the problem is that it wasnt going to my login screen, as soon as i turned on it went to tty) after i ran that it goes to theubuntu loading screen and is frozen
View 1 Replies View RelatedI am using Red Hat Enterprise Version 5. There is a ruby program which use standard input as its input (e.g. the Ruby program process input from standard input). I think standard input should be keyboard, correct?
So, I think other kinds of input (non-standard input) should not work (i.e. the ruby program should not be able to read input from such non-standard input), but actually I have tried using pipe works, I am so confused because I think pipe should be some other kinds of input -- other than standard input, why it could work? i.e. put text "123" in abc.txt with pipe, could achieve the same result as using keyboard as input to type "123" for the ruby program.
cat abc.txt | ~/test/rubysrc/foo.rb
I need to create backup of internal drive and write it on DVD. I want to do this in single command...like below: ntfsclone -f --save-image --overwrite - /dev/sda1 | growisofs -Z /dev/sr1=/dev/stdin
in above command, i tried to to create backup of first partition of internal drive and need to write this backup on DVD. But above command has some probolem due to which it could not write backup on DVD....and how to read from standard input in 'growisofs' command?
The code is attached..My intention is that getchar which usually blocks,should come out after 5 seconds(VTIME).But this is not happening..can anyone tell me the mistake that I make..?
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
[code]...
I cant convert audio files using flac with standard input. I tried the commands such as:
Code:
mpg321 -b 10000 -s -r 44100 -w - file.mp3 | flac - -o file.flac
or:
Code:
ogg123 -d wav -f - file.ogg | flac - -o file.flac
[Code]....
All such conversions doesnt produce any *.flac file. It seems flac doesnt accept minus sign for the standard input although flac manual allows to use it.
So my question is how I can use the standard input in order to decode audio data with flac?
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
I have squeeze with Gnome and 2.6.32-5-686 kernel. Due to problems with graphics card (kernel bugs), I'd like to update the kernel. The problem is, 2.6.32-5-686 seems to be at the moment last kernel for squeeze.Is it any way to update just a kernel and stay with squeeze or I must upgrade squeeze to the testing (wheezy)?
View 7 Replies View RelatedI'm using Debian Jessie on amd64. I have this video card:
Code: Select all01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [NVS 310] (rev a1)
I'm using the stock nouveau driver that ships with Jessie, and loads by default. I installed this card during my botched attempt to upgrade from Wheezy. This is a fresh install, and DPMS isn't working right.
I can run "xset dpms force off", and the screens will blank. I even see the "HDMI signal lost" screen of both (identical) monitors. However, before the power LEDs of either monitor go orange (instead of blue) the screens come back on as if I had made mouse or keyboard input. If I've locked the screen with xscreensaver, the screens are blank (I use only the blank hack). I've forgone the use of xscreensaver for now, believing it to be contributing to the problem. If I run "xset dpms force off" now, the screens blank, but the "HDMI signal lost" screen doesn't show, and the screens immediately unblank.
Here's the output of "xset q":
Code: Select allxset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
[Code] ...
It's like something is preventing the screen from going blank, but I don't know what it could be.
I installed the proprietary nvidia driver. Sadly, it does the same thing, so that's one thing I can cross off as the likely culprit.
Ran this command:
Code: Select allxset dpms 0 0 0
So when "xset dpms force off" is called, it powers down the monitor immediately. I will be reverting back to nouveau, and will report whether the problem resurfaces.
Though this was just a problem I was having with "amarok," however, It has come to my attention on "Ktorrent" as well.What is the connection? They are both based on the KDE desktop environment.Any "KDE" based program (GTK+?) will crash my GUI (im not sure if its called xserver or xorg or whatever). How do I go about diagnosing this problem? All the other programs run without crashing the computer, however, when I run "amarok" and "ktorrent" (both KDE bassed) my GUI crashes and restarts back to the login screen.
View 1 Replies View RelatedWhen X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again.
Xorg.0.log:
...
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(--) Synaptics Touchpad: touchpad found
# { rmmod psmouse && echo mem > /sys/power/state && modprobe psmouse; }
(WW) : No Device specified, looking for one...
(II) : Setting Device option to "/dev/input/mice"
...
How to tell X.org to try it's InputDevice again (without restarting X server)? rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.
Like in xte "str ў", but with support of all characters.
View 1 Replies View RelatedI am trying to install debian as a DC but on reboot I get the "Input not supported " error. I switched to virtual input and login to try to edit the xorg.conf file but created a new file instead because the xorg.conf file is open by the installation. How do I close it so I can edit it and continue. I am afraid to start a new file as I am not sure what is in the ools one.
View 2 Replies View RelatedI messed up my xorg file and now my pc wont start, when i boot ubuntu the display tells me that there is no input.
View 1 Replies View RelatedI'm trying to install Kubuntu 9.10 on my machine (I had the same problem with Kubuntu 9.04). The machine is:
- Core 2 Quad 6600
- Nvidia 7600 GS
- Two disk seagate 500 in mirroring raid software
When I try to install Kubuntu, after disk partition, my system dosn't see the CD. He tell me to insert disk into drive but I doesn't touch it. I resolved this mounting an external hard disk into /cdrom. After this, the installation continues until the step "select and install software". At this step, the installation procedure tell me an error. During this error, in the other console, I've this:
Code:
Jan 19 21:58:09 in-target: Alcuni pacchetti non possono essere installati. Questo può voler dire
Jan 19 21:58:09 in-target: che è stata richiesta una situazione impossibile oppure, se si sta
Jan 19 21:58:09 in-target: usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
[Code]....