ive been having trouble with my nvidia driver, so i ran "sudo dpkg-reconfigure -phigh xserver-xorg" in tty(the problem is that it wasnt going to my login screen, as soon as i turned on it went to tty) after i ran that it goes to theubuntu loading screen and is frozen
View 1 RepliesI need a video driver for SIS M760GX for an ACER Aspire 5000 laptop.
Everywhere I've looked it says to run
sudo dpkg-reconfigure xserver-xorg
Supposedly, this is supposed to open a window where I can change settings. However it does nothing and just returns me to the prompt.
When I put sudo dpkg-reconfigure xserver-xorg into terminal then hit the return key it asks for my password which I put in, it then seems to do nothing it doesn't open the xserver page to make any changes.
View 9 Replies View RelatedI did the following command while I had my partition mounted and was not able to restart until i pulled the power. sudo dpkg-reconfigure linux-image-2.6.32-21-generic. Everything seems to be working okay now but before I start getting into 10.04 i wanna make sure i just didn't screw anything up.
View 3 Replies View RelatedI keep getting this error when I try to install Adobe flash player E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. I had it installed just fine, then i restarted my computer and its gone. .
View 4 Replies View RelatedI'm using 10.10 and from today I'm getting this error Quote:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. When I'm trying to install any software using
Code: sudo apt-get <sw-name> Also I'm unable install using "Ubuntu Software Center", showing unhandleable error. Here is the details:
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 769, in simulate
return self._simulate_helper(trans, status_path)
[Code]...
Debian 5.04 64bitGnome advise which package provides dpkg-reconfigure
View 3 Replies View RelatedI have Lenny with Gnome.Howto fix graphic in other way than:Code:dpkg-reconfigure server-xorg
View 5 Replies View RelatedI have a fresh install of Jessie, and am having issues with debconf.
I have been trying to change to mdm from the default lightdm display manager. I have downloaded and installed mdm (apt-get install mdm) but when I run dpkg-reconfigure mdm nothing happens. As I understand it, I should get a menu that lets me choose which display manager to use.
I also installed lirc so I could get my IR remote working again, but when I run dpkg-reconfigure lirc nothing happens. I am supposed to get a menu with various options to choose from.
I have tried dpkg-reconfigure debconf and this gives me the menu with different options to choose, like it should when trying dpkg-reconfigure lirc or dpkg-reconfigure mdm. I tried using dpkg-reconfigure debconf to choose different settings, such as gnome, or editor, but they don't work either.
After I got the OS up and running (v9.10), I was prompted to download and install some updates. The download is complete, but when I try to install the updates, I receive the following message. What should I do?
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
I installed the software Ubuntu Tweak yesterday and I was satisfied of how it worked. today, surfing the internet I was hoping to find a solution to a couple of problems that I have: the computer sometimes get stuck when opening videos or photos - I can't see streaming TV. when the internet browser was asking me to install plug-in in order to show the videos I tried to install them but errors occurred.
so I followed the instruction in [URL] (many of these things didn't work and the terminal was showing error messages...) now after rebooting I have got the unity 2D I think (which is fine as I can't notice great differences) but I can't install the updates from Ubuntu Tweak the error message is: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report. how can I fix it and get my video codecds?
I recently installed Ubuntu 11.04 on an old Sony Vaio laptop. I was following some of the steps here..[url]
The step "Enable Full DVD Playback(Dual Layer DVD Support)" did not finish correctly doh and now I can't use 'sudo apt-get' for anything or the software center or using the 'Update Manager' does not work.
The update manger says it may be caused by an update not finishing correctly which sounds correct as explained above. The apt-get command gives me back the following....'Could not get lock /var/lib/dpkg/lock resource temporarily unavailable' 'unable to lock administration directory /var/lib/dpkg is another process using it?'
I tried the obvious restart but that hasn't worked.
Alright setting up a friends netbook, display has been a little iffy (slow. glxgears is giving like 100fps). Couple issues: xorg.conf doesn't exist (i know thats typically not an issue) and "sudo xorg -configure" and "sudo xorg --configure" both return "xorg command not found."
glxinfo say that its using Mesa for the software rasterizer and that the driver is from mesa. lspci says the VGA controller is from Intel. I'm thinking xorg is defaulting to vesa for drivers, but I need to know how to change that to the open source intel driver
I started with a Pentium4 system with a FX5500 AGP card and now have a i3 with integrated Intel video (Auburndale). The new motherboard is ASUS P7H55-M PRO. The monitor is a Acer AL1916 (LCD) with only VGA input. I have been using the nVidia oprietary drivers installed the "Debian way" (Cf using a Debian stable stock kernel.I first renamed xorg.conf so X would start without one. Once gdm starts, the monitor says the input is not supported. So I tried reusing the old xorg.conf file, changing the "nvidia" to "i810". X then fails to start and shows an error of no screens found.Everything is fine in text mode; only X is not working.I have to get this fixed very quick or I might not get to use Linux at work anymore.
View 7 Replies View RelatedI just wanted to post this in the forums for anyone else that was having the same issue. I looked all over the internet for 4 hours and could not find a solution and finally figured out what to do. Maybe this will help save some time for someone else.
The ERROR:
Removing nvidia-glx ...
dpkg-divert: error checking `/usr/X11R6/lib/modules/extensions/libglx.a': No such file or directory
[code]....
PROBLEM: My computer has an nvidia video card. I'd like to remove the packages that support ati and radeon. When I try to remove xserver-xorg-video-ati or xserver-xorg-video-ati, the package manager wants to remove xserver-xorg-video-all.
QUESTION: Is it safe to remove xserver-xorg-video-all? Obviously, I want to keep support for my nvideo card.
Since my upgrade from Debian 7.8.0 to Debian 8.0
Happy to get a lot of my computers now working fine with Debian 8 ...
This one embed a Silicon Integrated Systems Video card [1039:6330]
This computer with an Athlon 64 2800+ and 1GB of DDR RAM, destined to be a BOINC worker until the end of his life, had the chance to upgrade with a Debian 7.8.0 (LXDE) few times ago (after long years of Windows XP services). And the only thing I had to set was the wireless card (firmware-b43-installer, adduser me netdev, and it was good) and it was perfecly working. Apt-get was giving to me creepy old versions of software, so it was the only thing that disturbed me, but let's go for the brand new Debian 8.0
But now with Debian 8.0, the graphics are bad, resolution is bad too.
I first tried with "lightdm" and "mate-desktop-environment" because of the LXDE icons that were fine on every computer with 7.8.0 but distorted and cropped with Debian 8 on every computer too (how is it simply possible for the mainteners to find it ok ). Seeing that my SiS card was not working well, I tried to reinstall everything with Debian 8 and LXDE as before... and hope icons will be repaired soon. But the problem with my video card is still present.
Then, I realised that on my Debian 7.8.0 computers, xserver-xorg-video-sis is available and installed. But not available anymore on Debian 8.0
I have to do this to get my computer going and it fails.Also no apt-get update or entry to synaptic
View 2 Replies View RelatedI installed the debian 6.0 netinstall iso, now installing the xserver-xorg but get a lot of this error messages:
xserver-xorg-video-rendition: Depends: xorg-video-abi-6.0 which is a virtual package.
I have Lenovo 3000 n200. I'm new in debian, but it's great to me! I wan't to stay with this distro, but i Can't upgrade this to testing or unstable version. Lenny have too old packagges for me. All versions of squeeze (downloaded or upgrade from lenny) is broken. I can't run xorg. For about 2 weeks i'm serching for answer and i only found that this is xserver-xorg-conf. That's true this is the package that is broken, but cannot install this.
When i upgade system the synaptic package manager write me one package is broken (xserver-xorg-conf), so i delete it and install one more time. This same problem. So i downloaded and i have this same problem. When i restart system i cannot run xserver and gnome.
I experienced this problem on Friday but didn't have time to write a warning.A couple of days ago, xserver-xorg-core 2:1.10.2-1+b1 reached Testing before a corresponding dependency (recommendation), thus breaking the hardware acceleration. The issue is (better) described here (1) by a developer.A possible solution is to keep (2) the previous version (2:1.10.2-1) or, if you already installed the faulty one, to grab the former version from Debian Snapshots (3) and downgrade the package.Because the error was a simple path change, one could also keep the new version of xserver-xorg-core and link the DRI Mesa modules to the directories that are inspected now (as described here [4]).The issue has already been addressed (5) and a new version should appear in Testing shortly.[URL]
View 8 Replies View RelatedIt reads dpkg was interrupted you must run sudo dpkg manually to correct problem. I tried the terminal options and still nothing.. The thing is I am trying to install other packages and it says have to close that one out first.
View 1 Replies View RelatedI recently (fifteen minutes ago) started my old desktop again and tried to do an updateCode:sudo apt-getupdateWhich gives me:Code:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.When I try this, my screen goes back and after a few seconds I end up back at the loginscreen (I not logged in anymore)The output of Code:sudo dpkg --configure -ais followingCode:Setting up ubudsl (1.0.0.77-7) ... System start/stop links for /etc/init.d/ubudsld already exist.Stopping UbuDSL daemon...No /usr/sbin/ubudsldaemon found running; none killed
View 3 Replies View RelatedI am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove): subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
I'm trying to get the source package xserver-xorg-video-ati. My sources.list looks like this:
[Code]...
I have a fairly old debian distribution running on the linux Kernel 2.6.18-4-686 and I did something silly which has broken multiple packages. I use the manual package installation command (sudo dpkg -i filename.deb) to install a single package (gcc base) however I did this using the latest version of the package which seems to have broken my GCC package completely and I am unable to compile c++ anymore.
When I now load the Synaptic Package Manager it tells me that I have 10 broken packages and when I use the fix feature it tells me I need to update other packages to fix the depencies (it selects almost every single package on my system to be removed at this point!).
I cant change the system too much because the software packages are set up specifically to run a certain application and I don't want to change anything incase I make it stop working!
So my question is this:
If I go to the synaptic Package Manager and uninstall the broken packages (they are all gcc related), will I be able to use the aptitude command to install GCC again? If so will it automatically install the version of GCC that will work with my system? or will it try and install the latest version and then update the rest of my system?
I was installing something, usplash, I think it was...
I ran $ sudo aptitude install usplash
and after it asked me if I wanted to install some aditional packages, it returned this:
E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
I have seen this error before. I just ran the command
$ sudo dpkg --configure -a
And it returned this:
Setting up initramfs-tools (0.92bubuntu29) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.28.10-some-string-here
Cannot find /lib/modules/2.6.28.10-some-string-here
update-initramfs: failed for /boot/initrd.img-2.6.28.10-some-string-here
dpkg: subprocess post-installation script returned error exit status 1
I did an:
$ aptitude search initramfs-tools
and I noticed that it had a "C" next to it. I think this has something to do with the package not being configured correctly or at all. Also looks like it is trying to generate an initd, but missing something. That kernel name looks kinda funky, though...
How can I install xserver-xorg without all the unnecessary drivers for video cards / peripherals I do not have on my system?
View 2 Replies View RelatedI have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attachedDebian_error_msg.png? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
View 1 Replies View RelatedI'm trying to fix a friends EeePC notebook (Asus) running a recently upgraded Ubuntu 10.04 from Karmic Koala. She used the update manager for the upgrade to 10.04 LTS and everything was fine until she had tried to install something from the Ubuntu Software Center (she doesn't remember what happened). After that, both Update manager and Synaptic stopped working.Update manager gives the following error:Quote:Software index is broken. ... Try to use synaptic for something?!...
Then Synaptic manager gives the following error:Quote:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.And when I try that command, the terminal just keeps blinking with the cursor and does nothing for more than an hour. This is the output of the comand:Quote:
jasna@Jasna:~$ sudo dpkg --configure -a
[sudo] password for jasna:
Setting up moodle (1.9.4.dfsg-0ubuntu4) ...
[code]...