Debian Hardware :: Complete Hardware Failure - Black Screen Before Boot
Mar 5, 2010
No wonder my network-career is not getting in the mood... always other trouble.
Thing is: reboot and ended with a black screen: "no video available". i hit the reboot button. same result. I just, today, added a new DVD/Read-Write, so i have assumed thats the problem. Unplugged it: same problem. Nothing, not even the BIOS-display.
As i once started a PC without keyboard connected i did remember that that doesn't work (if i recall correct it gave me some beeps, today nothing like a beep). I replaced the keyboard and could boot.
But i don't trust this result. If someone might give an experienced opinion i would be very glad (i got several pc's, but this one is the only one which is really usuable, though its still a 200€ one, but it does all i need).
View 14 Replies
ADVERTISEMENT
Feb 3, 2010
whenever I try and boot the computer begins to load correctly, but after the scrolling ubuntu splash, I just get a black screen.
64bit Ubuntu 9.10
View 6 Replies
View Related
Jan 15, 2010
I have installed ubuntu 9.10 with karmic kernel and GNOME, on toshiba 512 MB RAm laptop. it worked fine but some times after complete shut down or sleep, it wont boot again. Laptop is completely dead and silent. I had to power it off, battery taken out and inserted again to get it started again. Then it worked all normal and fine. Why it happens and what i shud do next?
View 7 Replies
View Related
Jul 29, 2010
I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"
Code:
BIODate: 09/14/99
CPU type:celeron
[code]....
View 3 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Aug 8, 2011
I've just installed debian on a rather old laptop (Toshiba satellite 1800). The installation process was ok, I selected desktop supprot when it asked me which additional software it should set up.
But then, when I tried to boot for the first time, i saw some messages for the first time, but then I coud see only a black screen (yet the backlight is not turned off). Immediately before the screen turns black, the last printed line is something like "starting gnome...". When I select single-user mode in GRUB, the system (with no window manager) starts well.
View 3 Replies
View Related
Apr 1, 2011
I am experiencing a weird problem with my dell latitude laptop. I installed debian amd64 once with gnome and after grub it echoes the following message: Unknown controller version (2). You may experience problems. and after the /dev procedure my screen (16:9) goes black.
After that I tried to reinstalled debian without gnome and I booted to shell. From there I installed manually (apt-get) gnome and started gdm3 and I my screen was ok, but after I did a reboot the same problem happened. Also, when I boot with an external VGA monitor, the vga looks ok but the laptop screen is still black.
output of lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
EDIT: I just realized another strange thing. If I boot without the vga plugged, I get the usual black screen and If I wait and understand that I am in the login screen and at this time I plug the vga, then miraculously my laptop screen works fine!!! But later on if I close the laptop lid and open it again, then again ... black screen but if I plug the vga it's ok again!
View 13 Replies
View Related
Apr 22, 2010
I first installed Debian 64bit on DM510MO. The Debian 64bit single user (CLI) is working OK. Win7-64 is working OK. When I boot Debian 64bit in X mode (graphical interface) after the message "Starting webserver appache2." I have a black screen.The video IC is Intel GMA3150.00:02.0 VGA compatible controller: Intel Corporation Device a001 (rev 02)
View 3 Replies
View Related
Aug 11, 2010
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
View 3 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Dec 28, 2014
I am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
View 14 Replies
View Related
Jan 26, 2010
I am not sure but i think I have had a HardDrive failure of some sort.
When I boot up I get a black screen with white letter saying the following:
Code:
Does anyone know if there this is a HardDrive failure or is it something else that I can try to fix? I have back ups of all critical data so a reinstall is possible but I would like to get some noncritical data out on my XP partition.
View 3 Replies
View Related
Aug 16, 2015
On a Zenbook UX305, I did a fresh install of Debian. After booting, the screen turns black and I can't switch between terminals by typing Ctrl-Alt-F1..F7. After a boot with the keyword debug, the file /var/log/debug has the following contents:
URL] ....
View 4 Replies
View Related
Sep 19, 2015
Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.
I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.
I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same
Not actually solved, but in the end just reinstalling got rid of the problem.
View 6 Replies
View Related
Jan 14, 2011
I insert my F14 CD and booted the computer; I see the beginning of the installation and the the screen goes black and says:
No root device found.Sleeping forever. Boot failure.
View 2 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Apr 28, 2011
I've tried about a billion times to get this to install correctly to no avail. This is the amd64 desktop edition, but I've tried with the 32 bit as well. I have a lenovo W500. The system never boots off the USB. It gets through a bit, with text output, and then stops. Sometimes it doesn't even give an error message, and other times I get something like udev failed while loading some pci device. I've tried re-downloading the iso several times, different USB keys, different USB key creators, CDs, to no avail.
I then thought, well, heck with it, I'll just install 10.10 and upgrade. Nope, there's a GPG key error for some bizarre reason, which is tripping up apt, but it's not going to tell me what key that is so I can go and get it (and apt-key update does nothing). Command line upgrades fail similarly. So finally, I go for broke and try to just install the thing with Wubi. Of course, that eventually crashes too.
View 1 Replies
View Related
Sep 11, 2010
.After trying to instal 10.40 as a "guest" of Windows7 in its own partition on drive D I got all the way thru then re-booted to finish the install as requested. At that point after reboot I selected Ubuntu from the boot menu then it hung up after quickly displaying and overwriting some option numbers - probably for GRUB
I uninstalled 10.40 then tried Ubuntu 9.4. It worked better and gave me an option menu after the install reboot. If I chose "normal" it also hung up.I was succesful by chosing one of the other GRUB choices that it gave me.Now everything works but with an older version.
View 2 Replies
View Related
Jul 24, 2010
I get a complete system failure when my CPU is stressed. It's not the temperature because when it crashes the CPU temp is only ~55 C. When it crashes the video freezes but the sound repeats itself. Example. I start handbraking a movie, then open a tv show in VLC. This is what I hear.
Did you get that tire - then it freezes
get that tire
get that tire
get that tire
get that tire
... etc
That continues until I reboot my computer. This crash is pretty reliable, as every time I load my CPU that happens. If I don't do anything CPU intensive, I don't get the crash. Also, if I only load up one core of my CPU, then everything is fine. However if I run something such as prime95 or handbrake (which both utilize all 4 of my cores) the computer will crash within 30 seconds.
Ubuntu 10.04
Corsair 750 TX PSU
AMD Phenom x4 @ 2.3 GHz
4 GB G.Skill 1066 DDR2 Memory
Nvidia GTS 250 1 GB edition
Biostar AMD 770 AM2+/AM2 Motherboard
Three HDs, two are WD of 1 TB and 120 GB, and a 32 GB SSD.
View 6 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
May 31, 2010
I'm getting a HDD Lock screen or Disk Controller Failure at boot up. (Compaq Armada) The HDD stops the system dead. The controller failure will allow me to boot Fedora or Puppy from the CD drive.
View 1 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Oct 15, 2010
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies
View Related
