Just did an install and am loving Debian. I am having troubles with my card causing mini-freezes. I type and the input sometimes(every 30 seconds) stops and then catches up. This is really annoying. I figure it is the wireless driver because when I ran top -d 0.1 Ieee80211/1 or Ieee80211/0 was the main verdict during every stall. I have not had this problem with other distros, but came to Debian for stability. Any ideas on how to fix it?
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:
# mkdir hybrid_wl # cd hybrid_wl # tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz
The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.
I am trying to fix someone's computer, and the wireless card will not work! Two proprietary drivers show up on the "Additional Drivers" program, but every time I go to download and install them, I get an error message right before it finishes, and I still cannot use the card. I am using Ubuntu 10.10 Desktop
Can not get Ubuntu 11.04 to recognize my Dell 1390 Mini Card WLAN. IT works fine with a Ethernet connection but does not find my WLAN. Can someone please offer so much desired help? I have a Inspiron 1521 with an AMD 64X Processor.
i am new using linux i install fedora 13 in dell mini 10 and i want to how i find and install the drivers for my laptop. I tried Ubuntu the last time and it has some hardware detection but i dont know how it made in fedora
I'm a totally rookie at all this. I installed Ubuntu 10.4 Netbook edition in an HP Mini 1116 NR computer--I used an SD card & UNetbootin) and the wireless router is not recognized. I've been pretty much googling and troubleshooting this problem for most of the day. I always get stuck at a dead end. This netbook does not have an ethernet adapter nor a CD-Rom drive, so I have no way of connecting to the internet w/out wireless. I am able to download things from my other laptop to the SD card.
1. When I enter sudo apt-get install build-essential at the terminal, I get "package not found."
2. When I try to install b43-fwcutter or bcmwl-kernel-source, it either won't work because I can't connect to the net or I get a "dkms dependency" issue.
3. So I tried to install the dkms pacakge and got a "gcc dependency" issue. After that, I come up with a dead end.
An alternative option, so I read, is to use ndiswrapper and download the HP wireless broadcom driver, but that driver is a .exe file and I read that ndiswrapper needs a .inf file and I can't seem to find one. Does it matter?
how to install wireless driver on inspiron 1012 mini on ubuntu server 10.10 32bit. Not shore what is the wireless card name. I have no internet acsess whit that pc but can copy files whit usb from another pc.
I have a Samsung N310 with a atheros wireless card. Been having trouble getting it to work. I was thinking about upgrading to a N card anyway so I will be buying one tonight. Does anyone know of a Mini PCI N card that works out of the box with ubuntu 64bit?
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
Previously running Squeeze I was using the proprietary driver and never had any issues. Now using the nouveau driver video playback of mp4 files is glitchy and programs like google earth don't operate smoothly. I installed the nvidia driver from the repositories based on this guide, used nvidia-xconfig to generate an xorg.config file. I made sure noeveau was blacklisted and rebooted my machine.
I was greeted with a black screen. So I booted up in recovery mode, used telinit 2 (side note: what happened to /etc/inittab???) to change to a runlevel that doesn't start X, and confirmed that nouveau was, in fact, not loaded. Typed startx and without any errors or warnings the screen went black. ctrl+alt+fN wouldn't bring me back to a terminal, but hitting the power button did shut down X and halt the machine.
I'm not really sure how to go about debugging this as I get no useful output from anything, just a blank screen and that's it.
For the time being I just blacklisted the nvidia driver and let the system boot with nouveau; I'd still like to get the nvidia driver working properly, though. I've always just downloaded the driver right from nvidia and installed it, but I know that isn't the best way to do it. I'd rather not screw up a brand new system, it's so nice and fast with the new SSD.
Having upgraded to kernel 2.6.38 in wheezy, you now have to blacklist the nouveau driver as just uninstalling the packages don't seem to be enough as it is with squeeze. The latest nVidia 270 driver makes my GPU run over 10°s hotter. The 264 driver in the Debian repo has the same effect. I can't install the 195 driver (which I know is ok with my GPU), for some unknown installation error (error 1 during compile).
I have a GeForce 7950GTX on my Dell laptop. The hardware is ok, as the temperatures are much lower with squeeze, and I have cleaned inside the laptop.
Is anyone else having any issues with excessive heat with nVidia? Could this be a driver or a kernel issue?
And why did I have to blacklist the nouveau drivers even though they weren't installed?
When I install the ATI graphics driver, sure - I get all the screen resolutions I could possibly want, but the cost appears to be that it makes it causes my system to freeze at the user name and password screen. Sometimes the cursor blinks teasingly, but nothing appears as I type; sometimes the cursor itself is frozen.
My question isn't about the myriad of theoretical key combinations that might work - none of them have thus far.
I'm wondering whether I can simply continue using the default driver that the debian installer (ver. 8 stable 'Jessie') installed on my system. It's true that I only get 3 choices of screen resolution - 1152x864, 1024x768, and 800x600 - but my system seems so much more stable than when I install the proprietary ATI driver.
Aside from the login screen freezing - more often than not, strange things were happening keyboard wise - especially when composing posts for forums - the cursor would suddenly jump to another line of previously composed text for example!
So, can I keep the default driver or is it best to install the ATI driver and attempt to troubleshoot it? Is it even possible to troubleshoot a problematic driver - I knew how to do such things in Windows, but still learning about linux.
Also, when my system freezes at login (for whatever reason), if I'm obliged to simply hit the laptop power button to power down and press it again to restart - is this potentially damaging/corrupting my system - Debian, or indeed my hard drive?
Going forward, is the ATI driver issue likely be addressed in future Debian releases? Obviously, I would prefer to have the proper driver installed so as to have more screen resolution options - since I will be using my laptop for developing and testing web sites.
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
I have a Dell Inspiron 1525 laptop using Dell Wireless 1395 WLAN Mini-card (This is what Windows Vista says I have). I have installed Ubuntu as dual boot with existing Windows Vista. Wireless is not working in Ubuntu but working flawlessly in Windows.
Here is the output using CODE: lspci. hai@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) hai@ubuntu:~$
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
I installed ubuntu 10.10 and everything worked fine for two days (and I fell in love with linux) but now I can not connect to a wireless connection. Did I mention I am new to linux and have been working on this problem for a couple of days. My wireless card is 1395 WLAN Mini-Card I think I have the b43 driver installed. I have reinstalled the driver and linux but to no effect.
Inspiron 1525 - Wireless 1395 WLAN Mini-Card I passed two days browsing the net looking for a solution to my problem but no way.. Im running ubuntu 10.10 in my inspiron via VirtualBox and my wireless card is not detected by ubuntu.. I installed the bcmwl6.inf driver with the wrapper and it show me in wireless window that the hardware is not present.. So checked that in the terminal by typing :
I recently purchased a camera with a 2GB Mini SD flash card. It has a usb card reader and works well. Is it possible to use that as a usb stick (disk) for installation? I want to burn the netinstall iso and also use the rest (partition the card) as storage for the camera if it can be done.
I just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."
I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.
