Debian Hardware :: ALSA Sound Not Persistent In Games Or System
Jul 26, 2011
I recently changed from Gentoo to Debian Squeeze. All went fine but I have an ALSA issue. I have an AMD Athlon II X4 board with a Nvidia (Realtek) sound chip. After installing I got a lot of "no such device" errors, so I installed the Realtek driver the Debian way and the errors vanished. I could successful run alsactl init and alsamixer.
At this point there is no sound neither in games nor system. alsaplay says (on the screen) that it is playing a wav file but there is no sound. My test ''dd if=/dev/urandom of=/dev/dsp'' complains "/dev/dsp : no such file or directory". Well, all clear. modprobing the snd-*-oss modules brings sound alive but I have to do this after every restart. I have no clue how to make this persistent the Debian way.
View 6 Replies
ADVERTISEMENT
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
Jun 23, 2010
Slackware 13.1_64, everything works like a charm,BUTevery time my slackware boots up,the sound system changes from one device to another.So if I boot now, sound address is hw:1.0.
then if I reboot, the sound address becomes hw:0.0It's really annoying, because every time I have to re-run xmms and mplayer setup to get any sound!Also, if any program is playing audio (like xmms), other programs cannot play audio at the same time.ie: if I'm listening music with xmms then I try opening some video with mplayer or firefox/flash, I get no audio on this video....What's the deal with kde phonon? I thought it was supposed to be the new global sound system for kde4, like arts was for kde3
View 1 Replies
View Related
Mar 8, 2010
I installed Debian lenny amd64 a couple days ago and I have only got a few things figured out thus far. I got libdvdcss, and adobe flash along with some neat little games and apps. Well I had no sound at all because I couldn't get my audigy ls working with lenny so I'm useing my onboard sound (a realtek). I changed all my sound options to ALC 880 Analog now I have sound for movies and mp3's but not in games or on the web (ie ....., farmville).
View 4 Replies
View Related
Oct 14, 2010
So, I followed the verbatim instructions from Alsa to OSS here:[url]
I did this in hopes of getting sound in Fusion 3.63 to work.
Now, when I try to go to System > Preferences > Sound, it just says "Waiting for sound system to respond" and just hangs there until I hit cancel.
Also, when I plug-in my headphones, it plays through the headphones AND the system speakers.
View 1 Replies
View Related
Jun 18, 2010
I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
View 1 Replies
View Related
Nov 15, 2015
So I've got a new system on which I had to re-install Debian, and I've been trying to fix the sound today, but it doesn't seem to work... I've kept the same ALSA configuration (except a minor adjustment to the card number as this system appears to have two cards instead of one), but it doesn't seem to work as expected. I got this weird error while running an app that uses ALSA:
Code: Select allALSA sound driver initializing...
ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
--> (Device: default)...Failed: Operation not permitted
In VLC it works fine, provided that I manually choose the right device under Audio -> Audio Device.here's my /etc/asound.conf:
Code: Select alldefaults.ctl.card 1
pcm.dsp {
type plug
slave.pcm "dmix"
[code]....
View 12 Replies
View Related
Oct 28, 2015
I'm trying to create a persistent live Jessie system on my 8GB USB drive.
If that matters, I'm currently on an Arch Linux system, and I partly followed what's on the relative wiki (Pages Create a new MBR for a USB stick, Manually create a USB flash installation and Install Syslinux), plus a CrunchBang post explaining how to make a persistent live USB out of any Jessie-deriving distro (like their BunsenLabs Hydrogen).
The problem is, even if Debian boots up more than fine, the system isn't persistent at all.
Here's what I did (I know some passages are redundant, but still...):
Downloaded the Cinnamon flavor of Jessie via torrentErased the old MBR
Code: Select all# dd if=/dev/zero of=/dev/sdb bs=512 count=1 && syncCreated a 1.1G W95 FAT32 (LBA) active partition and used the remaining space on a Linux partitionFormatted the first to FAT32 and labelled it "Debian64". Formatted the second to ext4 and labelled it "persistence"
Code: Select all# mkfs.vfat -n Debian64 /dev/sdb1
# mkfs.ext4 /dev/sdb2 -L persistence
Mounted the first partition and the iso
[Code] ....
View 5 Replies
View Related
May 13, 2011
Alsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?
View 8 Replies
View Related
Dec 17, 2010
In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?
Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.
View 11 Replies
View Related
May 29, 2011
I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
View 4 Replies
View Related
Jul 11, 2015
I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...
Always when I run tvtime it sends me:
"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
mixer: No such mixer channel 'aux', using channel 'line'."
I've got this in the .asoundrc file:
pcm.!dmix {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
channels 6
period_size 1024
[Code] ....
And everything works with sound - but tvtime can't...
View 8 Replies
View Related
Jan 6, 2011
I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.
Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.
lspci shows:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
alsactl init gives:
alsactl: init:1743: No soundcards found...
alsamixer:
cannot open mixer: No such device or address
aplay -l:
aplay: device_list:235: no soundcards found...
View 14 Replies
View Related
Mar 27, 2011
since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected
[Code]...
View 1 Replies
View Related
May 18, 2010
I just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.
View 5 Replies
View Related
Jan 27, 2011
I've been having some issues with my sound card since I cannot play a sound with my current user. As a root user I can play sounds with "aplay" but as my regular user, I can't play anything
# aplay file.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:564: audio open error: No such file or directory
# sudo aplay file.wav
Playing WAVE 'file.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
I have add my user to the audio group with no success
usermod -a -G audio myuser
View 2 Replies
View Related
Apr 29, 2011
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3
[Code]...
View 1 Replies
View Related
Oct 18, 2010
After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found
[Code]....
View 3 Replies
View Related
Mar 27, 2010
I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.
here's some output:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code].....
View 3 Replies
View Related
Oct 2, 2015
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
View 3 Replies
View Related
Mar 20, 2011
I have a E-MU 0202 USB soundcard that I want to use as a input for my Debian Squeeze 6.0.1. Stock squeeze (kernel 2.6.32-5-686, version 2.6.32-31) has alsa-driver 1.0.21 as kernel modules and alsa-utils 1.0.23. The E-MU needs 1.0.23+ alsa driver, with 1.0.21 it loads in alsa but is not functional (no input) So I tried to install the 1.0.23 modules with module assistant: m-a update && m-a prepare m-a a-i alsa I left all conf-files (like /etc/modprobe.d/alsa-base.conf) standard. When I now connect the E-MU device, my whole system becomes unresponsive (to keyboard/mouse), and I get the following messages in my console: BUG: soft lockup - CPU#0 stuck for 61s! [modprobe:1292] Also, when I start top before connecting, I can see modprobe process taking 100% for a few minutes before system freezes completely. It did generate an oops once: [URL].... Does anybody here have any ideas how to get this working?
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Feb 24, 2010
I switched to Linux but I was, and still am a gamer, and I have been trying to get some of my favorites to run on Linux as well as find Linux native games. While this hasn't been hard, I have run into a sort of Brick wall. I'll get games to start, but there will be no sound at all. The game runs fine though. When I try to close the game, it crashes/freezes.
This has puzzled me because some games that display this bug now did not previously, and at first this only occurred on one game. Now it occurs on all games. I've checked around, found a few similar bugs, but the closest people seem to get to fixing it is "just uninstall pulseaudio and use something else". It only happens in games, music and other sound works fine.
As for specs, I must say I'm fairly ignorant of some things, but getting better, here is what I do know.
Mint 8
Nvidia graphics card (can't recall what model)
Gnome Desktop
View 9 Replies
View Related
Mar 6, 2010
I already posted a topic about this but i got wrongly interpreted as someone gave me a link to a topic to restore your audio fully, which isn't necessairy, as I AM able to play music through rythmbox, on dvd's, on ........ but not on games.
I have a conexant Hi-Def audio on a HP laptop here, and when i typed in the code 'aplay -l' in the terminal, i got this:
[CODE]jakob@jakob-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code]....
As you can see my conexantaudio driver is listed, but it does not seem to work with games.. I have 9.10 and in 9.04 it did work..
View 3 Replies
View Related
Apr 1, 2010
Graphics are fine, but the audio for my 3d games (trigger, TORCS, tuxcart) work for about a minute, and then start making really annoying crackly sounds, and then cuts out over all. Running Kubuntu 9.10 Karmic koala, dual booting with vista. Dedicated 30gigs to Linux. Installed with wubi. Works fine on vista.
View 8 Replies
View Related
Nov 1, 2010
I am having sound issues while playing some games under WINE. for this I will use World of Warcraft as it has options for different sound engines. The problem is that I will have sound running fine for a while after a fresh reboot. It will seem fine for a good half hour to an hour and then suddenly it will stop. It will still be present in the applications list in sound preferences listed as 'ALSA plug-in [wine-preloader]'. muting/unmuting and adjusting the slider has no effects. Enabling and disabling sound in the game also has no effects. Here is what I have tried thus far to try to remedy it:
tried all of the various sound options in winecfg (some simply don't produce any sound at all on a fresh reboot - OSS, for instance) tried with and without padsp tried the various sound engines in Config.wtf tried WINE from the Ubuntu repositories and the developer's PPA tried lowering the sample rate and the bits per sample in the audio tab of winecfg tried fiddling with the sound preferences applications controls I am not adventurous enough to try to install OSSv4 so that doesn't seem like an option for me. it is important to note that sounds not coming from WINE function as normal even while WINE is producing no sounds.
View 9 Replies
View Related
Feb 14, 2010
My problem is I downloaded a bunch of games, some work fine, others have no sound, others have sound for a while then have buzzing,screeching noises and can go mute and some of the games freeze. About 7 out of 10 games have this problem. I also have compiz fusion with full animations running with the globe and everything else is running smooth and fine. My computer has a intel media graphics card and its 1.73 ghz celeron processor with 1.5 gigs of ram. This is all just a big issue with games and other programs are fine.
Here is info about my computer.
noname@noname-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
06:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
View 1 Replies
View Related
Oct 11, 2010
basically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
View 8 Replies
View Related
Apr 13, 2010
It seems like it's mostly an issue with playing games. When I play certain 3D games, the audio may work for a little while, but will start getting scratching or full of static. Some times it's a lot, and other times it's just a little bit. Most times, the sound in the game will stop working after a short moment of static/scratchy sound. Then I am left with complete silence.I've seen on other posts that PCM volume may be turned up all the way. I wasn't sure what PCM was, but in the volume controls, I saw that you could adjust each individual application's volume. I assumed that this was PCM, as the game's volume was all the way up.I turned it down some, and I still got some static in the sound, and the sound still disappeared completely after a short time.
View 3 Replies
View Related
May 27, 2010
I am using 10.04 64-bit on a GA-770TA-UD3 motherboard with onboard Realtek ALC888 audio chip. I'm having scratchy sound with games like World of goo and Penumbra. I solved the problem for Penumbra by selecting OSS option instead of ALSA from the settings menu but I'dont have that option in World of goo (and many other games).I have no problem with video or audio files. The board is [URL]..
View 1 Replies
View Related
