Debian Hardware :: Crackling Sound On Jessie
Sep 19, 2015
So whenever I start-up and after I enter my passphrase for cryptsetup (before login manager) I hear this crackling sound from my speakers constantly throughout usage.
While watching a movies or playing Youtube videos it's less noticeable, but when I'm typing up or working it really gets frustrating.
I've tried to figure out if pulseaudio was the culprit. uninstalled and rebooted yet crackling and pops continued. I haven't yet altered or messed around with ALSA or snd_hda_intel driver. But I did notice while using Audio Mixer, muting the speakers section stopped the crackling ...
So I guess the problem lies with Alsa or snd_hda_intel or both?
lspci -v
Code: Select all00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
Subsystem: Toshiba America Info Systems Device f91b
Flags: bus master, fast devsel, latency 0, IRQ 108
Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
[Code]...
View 0 Replies
ADVERTISEMENT
Apr 2, 2010
I installed debian lenny recently and everything working fine except the sound device.
My laptop specs are code...
View 10 Replies
View Related
Aug 31, 2015
I have upgraded (twice) to 8.1 and I get constant crackling sound - interestingly only from my left speaker. It starts already after the GRUB boot, and when logged in it just cracks all the time.
- in Wheezy there is no this kind of problem
- I have installed Jessie (crackling), fresh install back to Wheezy (no problem), fresh install again Jessie (problem), back to Wheezy (no problem), and now Jessie (again problem).
- the volume slide is jumping like crazy together with crackling. There is no chance to manually change it.
I have managed (by some unknown chance) to set profile to off, and now it disappeared. However, it comes back ON when rebooted.
View 5 Replies
View Related
May 21, 2014
My microphone in skype is crackling on Debian Wheezy stable 7.5 ... It is OK on Windows so it is obviously not the hardware to blame.
I have tried already all the options I could find regarding this on the internet, by changing in /etc/pulse/daemon.conf:
Code: Select all resample-method = speex-float-10
OR
Code: Select all resample-method = speex-float-1
My output was also crackling but I solved it by changing:
in /etc/pulse/daemon.conf:
Code: Select all default-sample-rate = 48000
flat-volumes = no
in /etc/pulse/default.pa:
Code: Select allload-module module-udev-detect tsched=0
I also tried starting skype with
Code: Select all PULSE_LATENCY_MSEC=30 skype
Without any success. Now the output is perfect, but the microphone in skype (haven't tested it elsewhere) is crackling.
View 4 Replies
View Related
Oct 10, 2014
I don't know id it was after and update but the case is that I have no sound in my pc.
Code: Select all$ aplay --list-devices
aplay: device_list:268: no soundcards found...
Code: Select all$ ls /proc/asound
ls: cannot access /proc/asound: No such file or directory
Code: Select all$ cat /proc/version
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[Code] .....
View 14 Replies
View Related
Jan 13, 2016
check if your sistems detects your cards
Code: Select alllspci | grep Audio
check it alsa detects your saund cards:
Code: Select allaplay -l
try to initialice your drivers
Code: Select allalsactl init
Run Code: Select allalsamixer and check master and all volumes are at max, use <F6> to select cards.Install PulseAudio.Code: Select allaptitude install pulseaudio and check you have selected the correct output audio device.If the problem is a wrong selection try: Code: Select allecho "options snd-hda-intel model=generic" >> /etc/modprobe.d/alsa-base.conf or Code: Select allecho "options snd-hda-intel index=#CARD NUM#" >>
/etc/modprobe.d/alsa-base.conf
(if you most likely have an intel card)
check card numver with:
Code: Select allcat /proc/asound/cards
Just installed a Debian on my pc. I had to install the nvidia official drivers to get my card working (GeForce GTX 750 Ti)But i have no sound (in my Windows partition sound works fine). The sound cards are apparently recolonized and loaded but i get nothing.
Code: Select alluname -r
3.16.0-4-amd64
Code: Select alllspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
[code]....
then reboot, didn't work/Then i tryed to install the official Realtek ALC887 drivers from their page but get error compiling and no answers of how to fix it
Code: Select allerror: implicit declaration of function ‘fget_light’ [-Werror=implicit-function-declaration]
file = fget_light(fd, fput_needed);
didn't work/After that i pluged my pc to a friends HDMI tv and i got sound when i change PulseAudio aoutput. So i guess the nvidia card sound works, but my headphones and speakers that i own don't. Finlay i disabled my sound card on BIOS and alsa stop recognizing the cards even after enabling them again.
View 2 Replies
View Related
Jul 6, 2015
Why is sound mute on debian jessie (top right icon) ?
View 1 Replies
View Related
Feb 20, 2015
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
View 2 Replies
View Related
Sep 18, 2015
I've recently switched from Wheezy to Jessie and can't get sound to work.
It worked properly in Wheezy with the same hardware configuration.
I've searched web for possible solutions but couldn't have found the symptoms
similar to mine, i.e. no hw listed by aplay -l:
Code: Select all#aplay -l
**** List of PLAYBACK Hardware Devices ****
Remaining info:
Code: Select all#lspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
[Code] .....
View 1 Replies
View Related
Dec 23, 2015
After upgrade no sound. I tried "alsactl init" fix and that worked for awhile. Now even that isn't working.
Also tried the following:
# /etc/init.d/alsa-utils reset
[ ok ] Resetting ALSA...done.
# /etc/init.d/alsa-utils restart
# alsactl init
Found hardware: "HDA-Intel" "Realtek ALC898" "HDA:10ec0899,38421034,00100003" "0x1034" "0x3842"
Hardware is initialized using a generic method
View 14 Replies
View Related
Nov 19, 2009
I've tried some workarounds like adding an audio entry in the registry but it did not work. I think that the problem is related with the pulseaudio driver...
View 3 Replies
View Related
Feb 13, 2010
I have a Creative Labs SB X-Fi sound card and I am getting a lot of crackling & popping with it. Plus I have to kill and restart pulseaudio a lot. Does anyone know of anything that can be done to help this out? I have the latest F12 kernel and rpms installed.
View 2 Replies
View Related
May 4, 2010
I have installed Skype beta 2.1 on my ubuntu 9.04, everything works except the mic. All I get is noise (SSSHHHHH) when i try to use it. moreover Looking in volume control, no matter what volume I have the mic set to initially, as soon as I initiate a call the mic volume goes all the way to zero (then initiating that crackling staticky bug) and turning it back up doesn't work as the volume slider just slides back down. and also one of the mic channels (left or right, I can't remember) comes to zero and slowly the other follows it.
View 1 Replies
View Related
Aug 7, 2015
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
View 4 Replies
View Related
Sep 23, 2015
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info:
Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 8437
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code] ....
View 3 Replies
View Related
Jan 16, 2015
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
View 0 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
May 24, 2015
I installed Sound Juicer but all it does is say "cannot read tracks". Playing the music CD works fine otherwise in other programs so it's definitely not the system or CD.
Tried on another computer with Jessie to be sure and I got the same thing there.
I suppose I can just use a different program but wondering if it's just me or if it's something to report ?
View 3 Replies
View Related
Jun 22, 2015
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp
Running the server...
Trying JACK...
Trying ALSA...
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Trying OSS...
[CODE]....
Should I have a normal alsa-base.conf file?
View 3 Replies
View Related
Jul 11, 2015
I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...
Always when I run tvtime it sends me:
"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
mixer: No such mixer channel 'aux', using channel 'line'."
I've got this in the .asoundrc file:
pcm.!dmix {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
channels 6
period_size 1024
[Code] ....
And everything works with sound - but tvtime can't...
View 8 Replies
View Related
Jun 4, 2010
I recently upgraded to Ubuntu 10.04 from 9.10 and there's now a strange high-pitched crackling distortion sound whenever I play any kind of sound with any program, which seems to stop and start at random. My sound card is an SiS SI7012, and the sound was working perfectly before I upgraded.I'm not sure whether this is a problem with Pulseaudio or ALSA or what. I tried removing all of the Pulseaudio packages, but that didn't help, and I also tried doing 'remove completely' on all of the Pulseaudio and ALSA packages and then reinstalling, but that didn't work either
View 9 Replies
View Related
Oct 10, 2010
I use a Creative Fata1ity USB Headset for playing games. I use a VOIP Client called Mangler for ventrilo. I play WoW via WINE.
I am not sure what is causing it, but the sound quality will be amazing and then randomly go to this crackling, static, ping, underwater sound for people in Mangler and for the WoW sound.
What I do is go system > preferences > sound and then turn the sound to off and then back to my setting and it is fixed. It will then come back randomly. It could be 5 minutes or an hour.
Anyone have any clue what this could be or how to narrow it down. Makes raiding kind of hard when I have to fix my sound randomly while healing a boss fight.
It did this on 10.04 and then on 10.10
View 2 Replies
View Related
Nov 11, 2010
I recently upgraded from 9.04 to 9.10 (9.04 support just ran out). Ideally, I'd upgrade further to 10.04 or 10.10, but I am somewhat bandwidth limited, and so the additional 1.5GB upgrade to 10.04 is a last resort. After upgrading, I picked up a nice crackling sound. It seems to be tied to activity. Typing up this post resulted in a few crackling sounds a minute, but scrolling up or down, resizing windows, or doing anything more intensive (such as listening to music), and the frequency picks up.
lspci lists two audio devices: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)01:00.1 Audio device: ATI Technologies Inc HD48x0 audio Though I believe the second one is for a port on my video card, and thus the first one seems to be the one actually in use. If it matters at all, I'm running 64-bit, and am currently dual booting with Arch Linux (which has its own audio issues, and I was putting off tracking down because Ubuntu worked fine).
View 1 Replies
View Related
Mar 22, 2015
I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
View 1 Replies
View Related
May 19, 2015
Lenovo Thinkpad X201
Conexant 20585
Code: Select allfishybawb@minigonzo:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CX20585 Analog [CX20585 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I've been having problems with audio not working through the speakers since I upgraded to Jessie. I did a fresh install, the same hardware worked out of the box on Wheezy. Audio does work through the headphones - searching Google results in a LOT of similar issues on various distros, but none of the suggestions I've found have worked. Pulseaudio is not installed.
Alsamixer shows that the speakers are un-muted, and toggling the headphone auto-mute in case that was causing problems doesn't work. lsmod shows that snd_hda_codec_hdmi is loaded and in use - could it be trying to send sound via HDMI? Odd, because this laptop does not have an HDMI port. Blacklisting that module doesn't seem to make a difference however.
View 1 Replies
View Related
Sep 14, 2009
When I installed fedora 11 I had bad sound which crackled and crashed. I followed this guide -http://forums.fedoraforum.org/showthread.php?t=225660 - which fixed my issues in videos playing on the web and in VLC. However; in the last few days sound has bugun crackling again in VLC while playing videos (web is fine). All updates have been applied and I am running 32 bit Fedora 11.
Also totem when playing video crashes, freezes, crackles etc while playing videos though playing sound files is fine with no issues. Any ideas how I might solve this and get my sound while playing videos back to how it used to be?
View 5 Replies
View Related
Apr 21, 2010
I've got some sort of problem with my sound configurations (I think). There's this crackling/disturbance (with an ocational beeping sound) coming from my headset whenever I insert a headset or speaker. Turning the sound off doesn't make it stop either.I'm running Ubuntu 9.10 on a Acer Veriton 3600GT (some years old). Please note that I'm not all that familiar with Linux yet...Typing aplay -l in Terminal returned the following:
**** List of PLAYBACK Hardware Devices ****
card 0: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
Subdevices: 1/1
[code]....
View 5 Replies
View Related
Apr 30, 2011
I've been trying to configure my revo R3700 over the last day and I'm finally there. HDMI sound is working apart from the fact that all sound is crackling. Sound is working through analogue without issue its just HDMI that is distorted
I initially did the command
aplay -Dplughw:1,7 /usr/share/sounds/alsa/Front_Center.wav
Which produced no crackling or distortion. I then tried a mp3 which was distorted and crackling, upon trying the same command as above later on, this too started to be distorted
Searched through the forum and theres a few people that have had this issue and have resolved it simply by edited alsamixer however this isn't working.
View 5 Replies
View Related
May 15, 2011
I've been through what I could find in searches here, but nothing fixed the problem so far.Here's the situation: I am using Ubuntu Natty 11.04, dual booting. So I know the sound is fine on the XP system, and also works crisp and clear on my Vista laptop sitting next to me. I've tried the sound through Banshee, Amarok and Exaile all with the same crackling as if the file was ripped off a bad CD. I'll repeat that I've tested the speakers, and also the jack port (being that there are two on my PC) so I am fairly certain it is an issue with Ubuntu. Here is the ALSA information report: http://www.alsa-project.org/db/?f=ad...8b8d1ee19905a5
It's not a problem with PCM- the crackling will go away if the level on PCM is like 30~ but then the sound is very quiet even with Master and speaker volume at 100, at which point you can still make out the crackling.
View 9 Replies
View Related
Jan 19, 2010
I've had a snap, crackle, pop coming from my speakers since I put this machine together, even now, with no reason for any sound to be coming from the speakers. Additionally, the crackling only becomes worse when I play ANY audio regardless of player or source, however the sound does just drop for a few seconds and then back and then off again when there is SUPPOSED to be audio. I understand not working at all, but "kinda" working is more confusing.
I'm running slack64 with the with an updated kernel from current, even though the rest of the machine is stock 13_64. The problem was the same with the original 2.6.29.6 kernel.
View 4 Replies
View Related
