Debian Hardware :: Upgrade To Jessie Broke Sound
Jun 22, 2015
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp
Running the server...
Trying JACK...
Trying ALSA...
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Trying OSS...
[CODE]....
Should I have a normal alsa-base.conf file?
View 3 Replies
ADVERTISEMENT
Sep 22, 2015
I had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .
So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)
I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.
When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'
When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"
Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.
Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.
I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"
View 2 Replies
View Related
Dec 23, 2015
After upgrade no sound. I tried "alsactl init" fix and that worked for awhile. Now even that isn't working.
Also tried the following:
# /etc/init.d/alsa-utils reset
[ ok ] Resetting ALSA...done.
# /etc/init.d/alsa-utils restart
# alsactl init
Found hardware: "HDA-Intel" "Realtek ALC898" "HDA:10ec0899,38421034,00100003" "0x1034" "0x3842"
Hardware is initialized using a generic method
View 14 Replies
View Related
Mar 2, 2015
A few weeks ago I have installed Debian Jessie on KDE Desktop Version. I have a problem with the Display Manager Kdm, if i log out session the monitor turns off (DVI No Signal), the only option that I have it's forced shutdown or reboot via power button. I try another DM lightdm and this works fine. But i liked to know why log out session crash on Kdm.
Adding : TerminateServer=true at the end of /etc/kde4/kdm/kdmrc (Section :[X-:*-Core], solve the issue.
View 2 Replies
View Related
May 1, 2010
Just upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies
View Related
Nov 7, 2010
I upgraded my ubuntu installation from 10.04 to 10.10, now surround sound (5.1) does not work in xbmc, or in another player such as vlc. Only the front two speakers work. I noticed pulseaudio and alsa are installed. I thought i removed pulseaudio once before but cant really remember. In the sound configuration preferences thing (prefs >> sound), i have hdmi output selected (hdmi goes from the HTPC to the amplifier). It only plays audio in 2.0 instead of 5.1. I tried selecting the analog 5.1 sound option, but none of the test sounds work. However i noticed vlc still played movies with audio, but only stero no 5.1.
Previous to the upgrade, i had 5.1 working fine in xbmc, never bothered to check vlc since it was all good. Also, when i go into alsamixer, it does not show any rear speakers, it just shows a front speaker and a bunch of other stuff, like headphones. I'm not sure what other output you guys need, but let me know and i'll get it. Here is the alsa-info.sh output for my HTPC: [Code]..... Another note, after i reinstalled pulseaudio the first time, vlc fails to display a 5.1 movie and still plays tero output.
View 2 Replies
View Related
Mar 20, 2011
After yesterday's apt-get dist-upgrade, I lost my higher screen resolutions. Only had 800x600 and 640x480. After trying to re-install the Nvidia drivers several different ways without success, I ended up purging xorg and xserver and then starting from scratch, re-installing the drivers. In doing so, I either found the problem, or created another, ha.I think part of the problem was that I mixed Nvidia proprietary and debian installations and the update broke the drivers.I am now unable to install xorg or xserver because I can not remove/purge libgl1-nvidia-alternatives.
View 2 Replies
View Related
Dec 12, 2014
Yesterday, I ran a security update that upgraded my Squeeze kernel from 2.6.32-48squeeze8 to 2.6.32-48squeeze9.
Ever since then, my suspend to ram (STR) function is broken.
The machine will suspend normally, but will not resume. When I try to awaken the machine, I can hear the fan in the tower start up (the subject machine is a desktop computer, please see below for specifics), but the machine seems to be otherwise dead (e.g. the monitor stays blank, pressing the "caps lock" key on my keyboard does not activate said keyboard's "caps lock" led, Ctrl-Alt-F[x] has no effect, etc). My only recourse at that point is a hardware reset (ouch!).
I tried running Code: Select allpm-suspend from a terminal, with no joy. Same result running Code: Select allecho -n "mem" > /sys/power/state from a terminal.
I checked the /var/log/pm-suspend.log file and noticed that each Code: Select all...performing suspend line used to (before said kernel upgrade) be directly followed by a Code: Select all...Awake. line, but, now, all said Code: Select all...performing suspend lines are followed by an Code: Select allInitial commandline parameters... line.
Before this, STR has worked well ever since I first loaded Squeeze on this machine back in 2012.
Code: Select allSqueeze 6.0.10; 2.6.32-5-amd64
Intel i7-980 Gulftown CPU
Asus P6X58D Premium Motherboard
EVGA GeForce GTS-450 Graphics Card
G.SKILL Ripjaw DDR3-1600, PC3-12800, 1.5v RAM (6x4GB sticks, 24GB total)
Crucial RealSSD C300 128GB SSD
Western Digital Caviar Black 1TB HDD
Corsair HX850 PSU
[CODE]
View 14 Replies
View Related
Jun 23, 2015
I'm running debian testing on my laptop. This morning when I ran apt-get update && apt-get dist-upgrade, I was greeted by the following errors:
Code: Select all
Calculating upgrade... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information to resolve the situation:
The following packages have unmet dependencies:
libcurl3-gnutls : Depends: librtmp1 (>= 2.4+20131018.git79459a2-3~) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
A quick search found out that package librtmp1(2:2.4~20150315.gita107cef9b-dmo1) is already installed.
I do have some packages set on hold, however I don't think that's the problem:
Code: Select all$ dpkg --get-selections | grep hold
hostapd hold
libgcrypt11:amd64 hold
linux-image-amd64 hold
My sources.list on which I haven't touched for a very long time:
Code: Select alldeb http://mirrors.163.com/debian/ testing main non-free contrib
deb-src http://mirrors.163.com/debian/ testing main non-free contrib
deb http://mirrors.163.com/debian-security/ testing/updates main contrib non-free
deb-src http://mirrors.163.com/debian-security/ testing/updates main contrib non-free
deb http://mirrors.163.com/debian/ testing-updates main contrib non-free
deb-src http://mirrors.163.com/debian/ testing-updates main contrib non-free
View 2 Replies
View Related
Sep 23, 2010
I just updated my kernel to 2.6.34.7-56.fc13.x86_64 last night and now I have no system sounds. Audacious plays my mp3's just fine, just as all my multimedia works in my web browser, vlc, etc... The only thing being affected is system sounds. I tried playing a sample with aplay and I got loud, crackling nonsense and this output code...
View 4 Replies
View Related
Oct 10, 2014
I don't know id it was after and update but the case is that I have no sound in my pc.
Code: Select all$ aplay --list-devices
aplay: device_list:268: no soundcards found...
Code: Select all$ ls /proc/asound
ls: cannot access /proc/asound: No such file or directory
Code: Select all$ cat /proc/version
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[Code] .....
View 14 Replies
View Related
Jan 13, 2016
check if your sistems detects your cards
Code: Select alllspci | grep Audio
check it alsa detects your saund cards:
Code: Select allaplay -l
try to initialice your drivers
Code: Select allalsactl init
Run Code: Select allalsamixer and check master and all volumes are at max, use <F6> to select cards.Install PulseAudio.Code: Select allaptitude install pulseaudio and check you have selected the correct output audio device.If the problem is a wrong selection try: Code: Select allecho "options snd-hda-intel model=generic" >> /etc/modprobe.d/alsa-base.conf or Code: Select allecho "options snd-hda-intel index=#CARD NUM#" >>
/etc/modprobe.d/alsa-base.conf
(if you most likely have an intel card)
check card numver with:
Code: Select allcat /proc/asound/cards
Just installed a Debian on my pc. I had to install the nvidia official drivers to get my card working (GeForce GTX 750 Ti)But i have no sound (in my Windows partition sound works fine). The sound cards are apparently recolonized and loaded but i get nothing.
Code: Select alluname -r
3.16.0-4-amd64
Code: Select alllspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
[code]....
then reboot, didn't work/Then i tryed to install the official Realtek ALC887 drivers from their page but get error compiling and no answers of how to fix it
Code: Select allerror: implicit declaration of function ‘fget_light’ [-Werror=implicit-function-declaration]
file = fget_light(fd, fput_needed);
didn't work/After that i pluged my pc to a friends HDMI tv and i got sound when i change PulseAudio aoutput. So i guess the nvidia card sound works, but my headphones and speakers that i own don't. Finlay i disabled my sound card on BIOS and alsa stop recognizing the cards even after enabling them again.
View 2 Replies
View Related
Jul 6, 2015
Why is sound mute on debian jessie (top right icon) ?
View 1 Replies
View Related
Feb 20, 2015
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
View 2 Replies
View Related
Sep 18, 2015
I've recently switched from Wheezy to Jessie and can't get sound to work.
It worked properly in Wheezy with the same hardware configuration.
I've searched web for possible solutions but couldn't have found the symptoms
similar to mine, i.e. no hw listed by aplay -l:
Code: Select all#aplay -l
**** List of PLAYBACK Hardware Devices ****
Remaining info:
Code: Select all#lspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
[Code] .....
View 1 Replies
View Related
Sep 19, 2015
So whenever I start-up and after I enter my passphrase for cryptsetup (before login manager) I hear this crackling sound from my speakers constantly throughout usage.
While watching a movies or playing Youtube videos it's less noticeable, but when I'm typing up or working it really gets frustrating.
I've tried to figure out if pulseaudio was the culprit. uninstalled and rebooted yet crackling and pops continued. I haven't yet altered or messed around with ALSA or snd_hda_intel driver. But I did notice while using Audio Mixer, muting the speakers section stopped the crackling ...
So I guess the problem lies with Alsa or snd_hda_intel or both?
lspci -v
Code: Select all00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
Subsystem: Toshiba America Info Systems Device f91b
Flags: bus master, fast devsel, latency 0, IRQ 108
Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
[Code]...
View 0 Replies
View Related
Jun 25, 2015
I installed a Debian server a few time ago, with the Squeeze version.
Now I want to upgrade it to Jessie, but all related documentation only talk about the procedures to upgrade from Wheezy to Jessie.
What should I do? Upgrade first Squeeze to Wheezy and after that to Jessie, or I can upgrade from Squeeze to Jessie?
View 3 Replies
View Related
Aug 7, 2015
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
View 4 Replies
View Related
Sep 23, 2015
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info:
Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 8437
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code] ....
View 3 Replies
View Related
Jan 16, 2015
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
View 0 Replies
View Related
Jan 22, 2015
I upgraded to Jessie today and found that I have no sound.
Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux
There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570
Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...
[code]....
View 8 Replies
View Related
May 24, 2015
I installed Sound Juicer but all it does is say "cannot read tracks". Playing the music CD works fine otherwise in other programs so it's definitely not the system or CD.
Tried on another computer with Jessie to be sure and I got the same thing there.
I suppose I can just use a different program but wondering if it's just me or if it's something to report ?
View 3 Replies
View Related
Jul 11, 2015
I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...
Always when I run tvtime it sends me:
"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
mixer: No such mixer channel 'aux', using channel 'line'."
I've got this in the .asoundrc file:
pcm.!dmix {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
channels 6
period_size 1024
[Code] ....
And everything works with sound - but tvtime can't...
View 8 Replies
View Related
May 27, 2015
I upgraded my Wheezy 7.8 to make sure all packages were installed Before taking the next step to upgrade to Jessie.I upgraded to Jessie and it seemed to run OK....but after reboot I had no network Connection..I checked ifconfig and the wrong network card mac address is being assigned to the wrong card....?I have a clonezilla server on my server, so this was my network interfaces before and after upgrade
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[code]...
I even checked nano /etc/resolv.conf and sure enough my gateway was the same for my Internet eth0.When I ran ifconfig I could see that the eth0 mac address was set as eth1..I tried to reset my drbl for clonezilla but that only sees the vmware Connection and not my actural cards.. have taken alook at /etc/udev/rules.d/70-persistent-net.rules and the assignment is right but not ifconfig?
View 14 Replies
View Related
May 28, 2015
With "quiet" removed from the grub linux line, I'm getting the following error messages when the boot hangs up early in the boot process (19.768231 seconds into boot).:
input: HDA NVidia HDMI/DP,pcm=3 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
So, is this a NVidia issue or a sound card issue?
View 1 Replies
View Related
Jun 3, 2015
/var/log/syslog is full of messages
/etc/gdm3/Xsession[3408]: ![1433316153,000,xklavier_evt_xkb.c:xkl_xkb_process_x_event/] #011ATTENTION! Currently cached group 0 is not equal to the current group from the event: 1
What this means and how to fix it?
View 4 Replies
View Related
Jul 3, 2015
I installed a package (kicad) on my wheezy system using apt-get and it pulled down a shedload more files than I expected.When I restarted the system it turns out I've also been upgraded to
Release 8.0 Jessie
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
However I don't have gnome any more. Only XFCE.I tried
Code: Select allroot@client:~# apt-get install gnome
Reading package lists... Done.Building dependency tree.Reading state information... Done.Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following packages have unmet dependencies:
gnome : Depends: gnome-core (= 1:3.14+3) but it is not going to be installed
Depends: evolution (>= 3.12) but it is not going to be installed
Depends: evolution-plugins (>= 3.12) but it is not going to be installed
Depends: gnome-shell-extension-weather but it is not going to be installed
Recommends: gnome-software but it is not installable
E: Unable to correct problems, you have held broken packages.
My /etc/apt/sources.list is
Code: Select all#
# deb cdrom:[Debian GNU/Linux 7.7.0 _Wheezy_ - Official amd64 NETINST Binary-1 20141018-13:04]/ wheezy main
#deb cdrom:[Debian GNU/Linux 7.7.0 _Wheezy_ - Official amd64 NETINST Binary-1 20141018-13:04]/ wheezy main
deb http://mirror.waia.asn.au/debian/ wheezy main
deb-src http://mirror.waia.asn.au/debian/ wheezy main
[code]....
View 14 Replies
View Related
Jan 18, 2016
Using x11vnc server on Debian host, and TightVNC viewer client on Windows 7. All was working fine until a server host upgrade, from Wheezy to Jessie. Now, when I try to connect, TightVNC retrieves the certificate as normal, compares and accepts it, and starts stunnel. The next step would normally be to prompt for the VNC password.
Instead it gives an error:
ReadExact: Socket error while reading.
I'm guessing that some thing is missing or misconfigured after the Jessie upgrade, which broke many other things too, as Debian upgrades always seem to do. I have removed and reinstalled the x11vnc package, no effect.
The errors in the log file don't mean a lot to me.
The server is started with this command:
Code: Select allx11vnc -ssl -display :0 -usepw >>vnc-log 2>&1 &
If I start it up without the -ssl flag, and connect from the Windows system with a different client (Mobaxterm) it all goes well.
Relevant part (tail) of the server log file:
Code: Select allThe SSL VNC desktop is: myhost:0
PORT=5900
SSLPORT=5900
19/01/2016 12:31:10 SSL: accept_openssl(OPENSSL_VNC)
19/01/2016 12:31:10 SSL: spawning helper process to handle: 192.168.2.3:51942
19/01/2016 12:31:10 SSL: helper for peerport 51942 is pid 11193:
19/01/2016 12:31:10 connect_tcp: trying: 127.0.0.1 20000
[Code] ....
View 0 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Mar 22, 2015
I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
View 1 Replies
View Related
