check if your sistems detects your cards Code: Select alllspci | grep Audio check it alsa detects your saund cards: Code: Select allaplay -l try to initialice your drivers Code: Select allalsactl init
Run Code: Select allalsamixer and check master and all volumes are at max, use <F6> to select cards.Install PulseAudio.Code: Select allaptitude install pulseaudio and check you have selected the correct output audio device.If the problem is a wrong selection try: Code: Select allecho "options snd-hda-intel model=generic" >> /etc/modprobe.d/alsa-base.conf or Code: Select allecho "options snd-hda-intel index=#CARD NUM#" >>
/etc/modprobe.d/alsa-base.conf (if you most likely have an intel card) check card numver with: Code: Select allcat /proc/asound/cards
Just installed a Debian on my pc. I had to install the nvidia official drivers to get my card working (GeForce GTX 750 Ti)But i have no sound (in my Windows partition sound works fine). The sound cards are apparently recolonized and loaded but i get nothing.
Code: Select alluname -r 3.16.0-4-amd64
Code: Select alllspci | grep Audio 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller 01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
[code]....
then reboot, didn't work/Then i tryed to install the official Realtek ALC887 drivers from their page but get error compiling and no answers of how to fix it
Code: Select allerror: implicit declaration of function ‘fget_light’ [-Werror=implicit-function-declaration] file = fget_light(fd, fput_needed);
didn't work/After that i pluged my pc to a friends HDMI tv and i got sound when i change PulseAudio aoutput. So i guess the nvidia card sound works, but my headphones and speakers that i own don't. Finlay i disabled my sound card on BIOS and alsa stop recognizing the cards even after enabling them again.
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
So whenever I start-up and after I enter my passphrase for cryptsetup (before login manager) I hear this crackling sound from my speakers constantly throughout usage.
While watching a movies or playing Youtube videos it's less noticeable, but when I'm typing up or working it really gets frustrating.
I've tried to figure out if pulseaudio was the culprit. uninstalled and rebooted yet crackling and pops continued. I haven't yet altered or messed around with ALSA or snd_hda_intel driver. But I did notice while using Audio Mixer, muting the speakers section stopped the crackling ...
So I guess the problem lies with Alsa or snd_hda_intel or both?
lspci -v Code: Select all00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e) Subsystem: Toshiba America Info Systems Device f91b Flags: bus master, fast devsel, latency 0, IRQ 108 Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l aplay: device_list:268: no soundcards found...
I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.
I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.
Some info: Code: Select alllspci -v
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 8437 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.
I installed Sound Juicer but all it does is say "cannot read tracks". Playing the music CD works fine otherwise in other programs so it's definitely not the system or CD.
Tried on another computer with Jessie to be sure and I got the same thing there.
I suppose I can just use a different program but wondering if it's just me or if it's something to report ?
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Playback open error: -2,No such file or directory Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp Running the server... Trying JACK... Trying ALSA... ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Trying OSS...
I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...
Always when I run tvtime it sends me:
"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable. mixer: No such mixer channel 'aux', using channel 'line'."
I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
I've been having problems with audio not working through the speakers since I upgraded to Jessie. I did a fresh install, the same hardware worked out of the box on Wheezy. Audio does work through the headphones - searching Google results in a LOT of similar issues on various distros, but none of the suggestions I've found have worked. Pulseaudio is not installed.
Alsamixer shows that the speakers are un-muted, and toggling the headphone auto-mute in case that was causing problems doesn't work. lsmod shows that snd_hda_codec_hdmi is loaded and in use - could it be trying to send sound via HDMI? Odd, because this laptop does not have an HDMI port. Blacklisting that module doesn't seem to make a difference however.
I just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
I recently updated my Debian jessie system (for the first time in a few months). It broke my video driver (fortunately a dpkg-reconfigure fixed that) and my wireless driver (forget how I fixed that...), and my sound. ALSA still thinks I have an output device, I've set volumes all the way up in alsamixer.
In vlc and firefox, I can't hear anything using the default audio out (which I think is pulseaudio), nor can I hear anything if I ask them to use ALSA output directly. I've tried rebooting, killing/manually starting pulseaudio, etc to no avail.
I think it was either the kernel upgrade (went from 3.10 to 3.13) or a configuration option in some sound subsystem that broke. To be clear, sound was working perfectly before the upgrade. My machine is an Ivy Bridge-era Zenbook.
It has happened to my debian jessie system that the sound sometimes ceased to work, but after a quick review of alsamixer, pavucontrol it was easy to put everything back to normal. Not this time
The sound works as a charm with no headphones, but not with them, and I find them particularly useful for talking with people since the sound quality is way better...
I have alsa and pulseaudio installed on my system
uname -a Linux device 3.14-2-amd64 #1 SMP Debian 3.14.13-2 (2014-07-24) x86_64 GNU/Linux
lspci -v| grep Audio 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
In pavucontrol everything looks normal, and the output seems to be working...
I'm not having the invisible mouse problem, I don't have a mouse at all. Nothing is selected when I attempt to use my touchpad no matter how much I try. I've been trying to fix this problem for three or four days including by installing alternative OSs (Ubuntu Gnome 15.10, Ubuntu 14.04, Ubuntu 15.10), but those OSs have trouble finding the boot drive and is generally a massive nightmare. I figured Debian's lack of mouse would likely be easier to fix and so here I am. I've searched Google relentlessly for days now, the Man pages are useless for my problem, and the only mouse related posts on the forum didn't fit my own issues.
I'm using a Toshiba Satellite C55D-B5102 AMD-64 with Debian 8.2 (Jessie) and none of the operating options like Cinnamon selected at install.
How do you disable startx in Jessie when it boots up? In Wheezy I just had to disable the gdm3 service. I also tried a few settings in grub, but it still starts.
I've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
The grub boot loader offers in options to boot with sysv instead of systemd. The problem is that it seems to fail and fallback to systemd. Let's have a look on my dmesg :
Is it necessary to purge and reinstall sysvinit in order to guarranty configuration updates or on the contrary, will I break my system if it has none of systemd nor sysv ?
I'm trying to install zoneminder on my system (Debian 8 Jessie). I was trying to follow a guide on puccinellidigital, since I use nginx on my machine.
everything is OK, but I can't get the xinet to work
Code: Select allservice xinetd status Code: Select all... Oct 09 14:24:39 donnager xinetd[1102]: service/protocol combination not in /etc/services: zms/tcp ...
I keep most of my files on my server, but fiddle with them using NFS from one or another of my laptops - so they all have static IPs assigned by my router. If I want extra speed I plug in an Ethernet cable. My old DI524 wireless G router seems quite happy to have two MAC addresses (Ethernet and wireless) assigned to the same static IP, so long as I don't try using both simultaneously. However three Wireless N routers I've tried won't allow this, nor will dd-wrt.
I really don't want to have to set up every laptop as two separate hosts on my network. 'orrible complications.
Best solution I can think of is to get the Ethernet card to spoof the wireless MAC address with e.g. macchanger, as per this excellent page here: [URL] ....
I don't mind running a script manually to do that on each occasion.
This works perfectly on my old R50 Thinkpad running Debian Squeeze, but on my R60 (running Wheezy) and T400 (running Jessie), macchanger works initially, BUT as soon as I hit 'enable networking' in the Network Manager applet, the ethernet card reverts to its original setting. So of course then my router allocates a random IP and so NFS won't work.
Exactly the same goes for the iproute method 'ip link set dev eth0 address [fakemac]' - ifconfig shows it's worked, but it reverts as soon as NetworkManager goes back up.
I don't know where Network Manager (if it is that) is getting the Ethernet card's original MAC from, it seems to be listed in /etc/udev/rules.d/70-persistent-net.rules, so on the T400 (Jessie) I've even tried creating a file in /etc/udev/rules.d/75-mac-spoof.rules along the lines suggested in that archlinux page I mentioned - ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="[original MAC]", RUN+="usr/bin/ip link set dev %k address [fake MAC]"
but it seems to have no effect.
Short of reverting to Debian Squeeze on all my laptops, I don't know what else to do. Or getting into my router and reassigning the IP / MAC address by hand every time (!).
(If there's a better way to swapping easily from wireless to Ethernet when required, I'd like to know.)
I have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.
For example, something, it fails at the following: [ OK ] Started LSB: REP portmapper replacement [ OK ] Reached target RPC Port Mapper Starting LSB: NFS Support files common to client and server
Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.
So, I did the upgrade to Jessie today and everything went fine and I do like the gray look of the Gnome Classic Desktop. Not much change here.
But it is impossible for me to install the 3.16 kernel.
When I try, I get the following error (sry, it's german, but you should get the point):
Code: Select allE: /var/cache/apt/archives/linux-image-3.16.0-4-amd64_3.16.7-ckt9-3~deb8u1_amd64.deb: Extrahierte Daten für »./lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko« können nicht nach »/lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko.dpkg-new« kopiert werden: Es konnte nicht geschrieben werden (Auf dem Gerät ist kein Speicherplatz mehr verfügbar)
It basically says, there is not enough space on /lib to copy the modules for the new kernel. (I have about 100M free there.)
So, as you can see, there isn't that much space on / at all - don't blame me, blame the Lenny Installer. Personally I can live with the 3.2 kernel but I wonder if there is any possibility to install the never one without a total re-partitioning.
