Ubuntu Networking :: TP-LINK TL-322G Doesn't Work?

Feb 26, 2010

I try to do wireless man-in-the middle attack with my ASUS laptop and I've alreay got two wlan adaptors, a built-in Atheros NE-785H and a TP-LINK TL-W322G USB wireless adaptor. Either of them is to act as a rogue access point (soft AP). The biult-in adaptor works well but I just can't get the TP-LINK working properly.

I have alreay visited the threads below No Wireless with TP-LINK TL-WN322G found Problems with a TP-LINK TL-WN322G 54g Wireless USB Adapter (ZyDAS zd1211b Chipset ) HardwareSupportComponentsWirelessNetworkCardsTP-Link tp-link WN322G Wlan mit TP-LINK TL-WN322G

I'm running Karmic with 2.6.31-19, according to the Ubuntu help page it should work out of the box, but it just wouldn't work for me. I only got it working with ndiswrapper, which is clearly not what I want to use since it's not supported by aircrack-ng.

Here are results after running modprobe -v zd1211rw

Code:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
insmod /lib/modules/2.6.31-19-generic/updates/cw/zd1211rw.ko
then lsmod | grep zd

[Code].....

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: D-Link DWA-125 Wireless Adapter Doesn't Work W 10.04?

Sep 7, 2010

Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.

View 3 Replies View Related

General :: Magnet Link: What Is It And Why Doesn't It Work

Jan 30, 2011

Kernel: 2.6.21.5, O.S.: GNU/Linux (Slackware 12.0).
Firefox 2.0.0.4

In some sites I find a link named "Magnet Link". If I click it, the browser says:

Quote:

Firefox doesn't know how to open this address because the protocol (magnet) isn't associated with any program.These sites are p2p (peer to peer) download ones. Perhaps Magnet Link has some advantage over normal torrents and it's a pity I can't profit by it.

View 2 Replies View Related

Software :: Why Doesn't Firefox's Quick Find (/) Work On This Link

Oct 18, 2010

I routinely use Firefox's quick find feature. I press the slash key, /, type what I want to find on the page and it searches as I type. I love it. It's very convenient. But it doesn't work anywhere on this page.

View 5 Replies View Related

Debian Hardware :: TP-Link TL-WN821N V2 Doesn't Work With Kernel 3.0 (Solved)

Jul 25, 2011

I'm running Kernel 3.0 and i cannot use my TP-Link TL-WN821N v2. # lsusb Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]

[Code]....

ifconfig wlan0 up doesn't work. With kernel 2.6.39 I can use it.

View 3 Replies View Related

Ubuntu Networking :: D-Link DWA-140 Seems To Sort Of Work?

Mar 21, 2010

I've got an oldish laptop which I've installed 9.10 on. I plugged in a D-Link DWA-140 USB wifi dongle to see if it can connect to my wifi router. It quite happily flashed it's light, and when I click on the wifi icon on the top panel it lists a bunch of wifi networks including my own. However, when I select my network and enter the passphrase it doesn't connect, and just keeps asking for the passphrase/key again

View 1 Replies View Related

Networking :: D-Link DWL-g122 / Make It Work?

Jan 25, 2011

How to make it work?

View 1 Replies View Related

Ubuntu Networking :: Symbolic Link Paths Don't Work Over Network?

Sep 17, 2010

like to create symbolic links on our server which will work from any work station.I guess the problem is that they use absolute paths.Since the absolute path is different from each workstation, they don't work except for the computer on which they were created.Is there a way to make them use relative paths instead?

View 2 Replies View Related

Fedora Networking :: Make A D-link Dwl-650+ Pcmcia Card Work Through Ndiswrapper?

Jul 29, 2009

I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.

But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?

View 14 Replies View Related

Fedora Networking :: 15 Intel(R) Wireless WiFi Link 4965AGN - Can't Get To Work

Jun 7, 2011

I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:

[Code].....

View 5 Replies View Related

Ubuntu Networking :: Sony Z - Wireless Intel Wifi Link 5100 Not Work After Apt-get Upgrade

Dec 4, 2010

i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.

the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )

View 4 Replies View Related

Fedora Networking :: Long Awaited WUA-1340 D-Link Wifi Adapter Has Arrived, And...unfortunately Won't Work?

Nov 2, 2009

my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,

Code:
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2
tar -xjf rt73-k2wrlz-3.0.3.tar.bz2

[code]....

View 3 Replies View Related

Networking :: DNS Lookup Doesn't Work, Ping, Firefox Will Not Work Properly?

Apr 23, 2009

I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.

View 2 Replies View Related

Ubuntu Networking :: Mount To Vista Needed For Apache - Symbolic Link Not Allowed Or Link Target Not Accessible

Apr 26, 2010

I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf

[Code]....

The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.

log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html

The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.

View 3 Replies View Related

Ubuntu Networking :: Ekiga Doesn't Work With 10.04

Jun 9, 2010

I have recently installed ubuntu 10.04. After some days of trying I can say that ekiga doesn't work with 10.04. With the same computer I was perfectly able to use ekiga with ubuntu 8.1, the 10.04 gives me connections problems.... it simply say says "Could not register (Failed)".I'm trying to connect with my voip provider (12voip.com) but it seems that I can't. I have even tried other programs like empathy, Twinkle, QuteCom but with none of them I can connect with my voIP provider. I think there are some connection problems but I really don't know how to face them. We have to configure router in 10.04 for sip connection? Actually I can't phone at all.

View 4 Replies View Related

Ubuntu Networking :: Netcat Doesn't Seem To Work

Jul 27, 2010

I've tried to use netcat in the past and assumed it was my stupidity that was preventing it from working... but this is getting ridiculous. I'll execute nc -l 3333 on a server at 192.168.0.105 (after opening it on the firewall of course) then I run nc 192.168.0.105 3333 on my laptop (from 192.168.0.101). and nothing happens... i start typing and nothing comes up on the terminal.

I run nc -z 192.168.0.105 80 which should ideally do a port scan of port 80 on that server (of which I'm running a web server that clearly works) but it doesnt even give me any feedback. Nothing happens. Now when I use the verbose flag i see that I am indeed connecting to the specified port on the server successfully (so the port scan one is a success but only with the verbose flag... which shouldnt be the case I believe). But still once I have the server listening and the laptop connected... I type in both windows and nothing happens...

View 1 Replies View Related

Ubuntu Networking :: Set Up JVJ 3G Modem - URL Doesn't Work

Aug 30, 2010

I have JVJ 3G modem,one from Singapore. I have try out as [URL]... But it doesn't work. Has anyone try it before?

View 4 Replies View Related

Ubuntu Networking :: HP Printer Doesn't Work?

Aug 31, 2010

I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.

View 7 Replies View Related

Ubuntu Networking :: Wireless Doesn't Always Work

Nov 15, 2010

I'm running Ubuntu 10.04 on my laptop. Up until about a week ago, my wireless worked fine, but now it rarely connects. Sometimes the connection indicator shows that I am connected, but when I click on it it doesn't show any active networks. Even when I use a wired connection it doesn't always work.

View 3 Replies View Related

Ubuntu Networking :: Bluetooth On 10.04 Doesn't Work?

Dec 22, 2010

i have had my bluetooth keyboard and mouse working fine for a little while now, then one day.. seemingly out of the blue (no pun intended) it stopped. heres what i deduced:

Mouse works fine, always keyboard doesnt.

I'm using a logitech dinovo edge

and i can manually force the keyboard to connect by putting the keyboard into discoverable mode (press the button on the back of it) and using hidd:

Code:
hidd --connect XX-XX-XX-XX-XX-XX
but who the heck wants to do that on every reboot or resume from sleep! yikes..
firstly, i noticed that bluetoothd was segfaulting alot:
Code:
ec 22 17:26:09 hostname kernel: [21329.811149] usb 2-6.2: new full speed USB device using ohci_hcd and address 6

[Code]....

View 1 Replies View Related

Ubuntu Networking :: 10.4 Network Doesn't Work Due To DNS

Jun 15, 2011

i've installed it on my parents old computer, mostly for downloading. But wired internet did work all the time but then i had to reset our router because of some problems and now it doesn't work anymore! But the strange thing is, if i put the cable on my own laptop with windows on it, then it works as normal.

So i guess its some kind of DNS problem, but i'm very new with ubuntu and also not so good with computers. Our network is simple just an modem connected to an router: Sitecome WL-341.

View 4 Replies View Related

Fedora Networking :: Networking On F11 Doesn't Work On Various Machines

Aug 25, 2009

Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?

View 1 Replies View Related

Ubuntu Networking :: Internet Doesn't Work After Upgrade

Jan 4, 2010

I just upgraded from 9.04 to 9.10. When I restarted, I admired the new login menu, then went to Firefox. I noticed that my wireless didn't work (it did in 9.04) Thinking I'd just need to reinstall the drivers, I plugged in the computer to a working Ethernet outlet with a working cord. I noticed that Ubuntu didn't tell me that Auto eth0 was connected. It didn't tell me anything. And then I went to Google and realized that the wired connection didn't work either. Then I came here on an iPod Touch and you know the rest.

Edit: And other devices work too on the network.

View 2 Replies View Related

Ubuntu Networking :: Internet Doesn't Work On MSI U130?

Jan 10, 2010

I really want to convert over to ubuntu and use ubuntu netbook remix on my new netbook but I've had a hell of a time trying to get it to access the internet, I've tried installing drivers but I don't really know how.

My Netbook Details:

MSI U130
1.66 Intel Atom N450
1GB DDR2 Ram
Windows 7 Starter
802.11 bgn 1r1t Mini Card Wireless Adapter

View 3 Replies View Related

Ubuntu Networking :: Gvfs-mount Doesn't Work Through Ssh?

Jan 26, 2010

setup consist of three machines: 2 servers (A and B)(ubuntu) and my local laptop Server A is a company controlled server which holds project data Server B is our office local server, which we use for development purposes. The problem occurs when i ssh from my local laptop to server B. After loggin in, i execute a script to transfer data from A to B. This script mounts server A using gvfs-mount. It fails to mount completely and gives me the following error

Code:

Error mounting location: volume doesn't implement mount

However if i log onto server B, using the servers keyboard and monitor (using a gnome session) i can execute the line. To verify that it's something related to the ssh login, i tried the following: (My local laptop is also running ubuntu) from laptop open a terminal. See the gvfs mount work as expected. open another terminal and ssh localhost tried to execute gvfs-mount from the local ssh session and i get the above mentioned error. After googling a bit, i found that it might related to dbus (which i know _nothing_ about) and i tried

Code:

dbus-launch gvfs-mount and then tried to gvfs-mount server A, but it fails again.

View 9 Replies View Related

Ubuntu Networking :: WLAN Doesn't Work Under VirtualBox?

Feb 21, 2010

On my HP TX2500 laptop, dual-booting Vista and 9.04, Ubuntu installation found the WLAN and it works fine.I installed VirtualBox with Vista as the host and 9.04 as the guest. Wired Ethernet works fine but it didn't seem to find my WLAN. What more do I need to do?

View 1 Replies View Related

Ubuntu Networking :: Internet Doesn't Work, Except Skype?

Mar 10, 2010

I have a desktop pc with xubuntu 9.10 32bit installed. I don't have direct access to this machine, but they told me that internet is not working (firefox, synaptic,etc...), but only skype works! If they reboot on windows, everything works well, so it's not a matter of connection or dns.It's very important because they work with that computer. How can i solve the problem? and what could be the cause of this strange anomaly

View 3 Replies View Related

Ubuntu Networking :: .04 - Wired Network Doesn't Work

May 4, 2010

I installed Ubuntu10.04, It cannot driver Wired network and wireless. Later I installed linuxMint9, wireless is ok, but wired network doesn't work. I am sure the lan cable is ok. It works in Windows.

View 3 Replies View Related

Ubuntu Networking :: Broadcom Wireless Doesn't Work

May 20, 2010

I'm working on Lucid, in HP Pavilion 9730us laptop.

My wireless broadcom card was working just fine until now as i installed it with the Hardware Devices manager, Today i put a new ALFA AWUS036H usb card to work with aircrack. both cards were working together for a while, but as i started playing around with aircrack the broadcom card of the HP has stopped working.

I made a mistake and followed the aircrack tutorial for R8187 / ieee80211 stacks driver, while i'm using RTL 8187 / mac80211 stack drivers, and blacklisted the RTL8187 , rebooted and then both card didn't work. I un-blacklisted it, and the ALFA is working but the broadcom not!

iwconfig shows me only one wireless card on wlan0 the blue light showing activity in the HP card doesn't go on.

Tried to uninstall and reinstall broadcom drivers, still no change.

View 2 Replies View Related

Ubuntu Networking :: Kmail Doesn't Work With Wireless?

Aug 11, 2010

I use kmail in kubuntu 8.04. Whenever I have a wired connection, kmail checks email and sends messages just fine. However, any time I switch to wireless, kmail just says "No new messages," without even checking. I am also unable to send email over wireless.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved