Debian :: Possible To Run Kde In Wheezy Without Udev?
Aug 7, 2011Is it possible to run kde in Wheezy without udev? I am asking this because the modesetting failure is manifested as soon as udev tries to populate the /dev directory.
View 6 Replies
ADVERTISEMENT
Debian Configuration :: Udev Static Device Change From Wheezy To Jessie
Sep 9, 2015I am using a 3rd party kernel driver that does not support udev properly. When I was using wheezy I placed the required device files in /lib/udev/devices.
The udev in jessie does not appear to support this. Is there any way to have udev create these device files or will I have to create then using a script at boot-up?
Debian Multimedia :: Debian Wheezy Xfce4, No Reboot, No Shutdown?
Sep 3, 2011i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies View RelatedDebian Multimedia :: Debian Wheezy / Screen Blinking
Mar 30, 2011I am giving Wheezy a whirl and am having with screen blinking ever 30 seconds.
View 5 Replies View RelatedDebian :: Run Script From Udev?
Aug 30, 2010I'm trying to run a script when a sd card is inserted into the drive. my udev rules are as follows:
BUS=="usb", KERNEL=="sd*", SYSFS{serial}=="058F63356336", NAME="sdcard", RUN+="/bin/mount /dev/sdcard"
BUS=="usb", KERNEL=="sd*", SYSFS{serial}=="058F63356336", OPTIONS+="last_rule", RUN+="/home/user/test"
The first line works, naming the device as "sdcard" and mounting it in the correct location. The second line should run a simple script to write a file with some text in it. If I run the script it works so I'm assuming it's not being done by udev but I done know why.
Debian :: Squeeze Vs Wheezy ?
Nov 29, 2010But when Squeeze goes from 'testing' to 'stable' in December... does Wheezy get promoted from 'sid/unstable' to 'testing' at the same time?.
I started my life in Linux with and currently use Ubuntu, and it runs decent(barely). However, I just upgraded to Ubuntu 10.10, and because of strange little issues and increasing bloatware, I have been forced to strongly consider the "mother OS": Debian.
The reason for my original question is that I want to run whatever the current "testing version" is. And if Wheezy gets promoted at the same time Squeeze does, then I will just wait the 4 weeks instead of slogging through another install(I prefer fresh installations vs upgrading within). I know the test versions of Debian are a bit more active than stable, but I have used Ubuntu for over 2 years, so I have some experience dealing with Terminal commands, package management, gnome, etc...I am also currently VirtualBoxing a copy of Squeeze.
Debian :: How To Upgrade To Wheezy
May 20, 2011I got "stuck" with stable up to now and want to upgrade to Wheezy. But, although I've done this before, I'm having a dependency problem I wanted to ask about before breaking my system somehow. This is the /etc/apt/sources.list, ready for Wheezy:
[URL]
So, I regularly use aptitude as my package manager. After updating the database with aptitude update, trying aptitude full-upgrade gives me a huge of conflicts.
[code]....
But, if I use apt-get dist-upgrade, I get no conflicts. if I dist-upgrade with apt-get, will that affect my daily usage of aptitude (which I prefer)? I know APT is a single database and apt-get and aptitude are just different interfaces, but I guess differences might rise when marking packages as automatically or manually installed.
Debian :: Can't Install JDK 8 In Wheezy
Apr 19, 2015I dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:
Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$
I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....
Code: Select alllrwxrwxrwx 1 root root 22 abr 19 18:57 java -> /etc/alternatives/java
I've tried different tutorials I found surfing the web but none of 'em seem to work.
Debian :: 8.1 - Can't Process Updates For Udev And Systemd
Jun 6, 2015I was trying to install recent updates, but apt-get couldn't do this. Here's the output I got:
Code: Select all(Reading database ... 187979 files and directories currently installed.)
Preparing to unpack .../udev_215-17+deb8u1_i386.deb ...
Failed to execute operation: Connection reset by peer
Message from syslogd@debian-LAPTOP at Jun 6 14:56:49 ...
kernel:[357720.299647] systemd[1]: segfault at b87cf92c ip b765e480 sp bf872e60 error 4 in systemd[b762f000+130000]
Unpacking udev (215-17+deb8u1) over (215-17) ...
Failed to execute operation: Activation of org.freedesktop.systemd1 timed out
[Code] ....
Now I can't continue upgrading because every time it tries to finish the previous update and fails to process udev.
I don't know if it's relevant, but while upgrading udev for the first time, my laptop switched to tty1 on its own. When I switched it back to graphic subsystem, it still was in process of upgrading udev or systemd and after all failed to finish.
Debian Configuration :: Automount External USB HD Using Udev
Jan 23, 2011I have a problem copying my udev rules from other distro to another pc running debian. My box is running debian without any DE and I want my USB disks to be automounted based on the label; I believe udev is the nicest way to do this task.
Anyways : my rules are (copied from archlinux wiki btw)
cat /etc/udev/rules.d/92-my-media-automount.rules
# vim:enc=utf-8:nu:ai:si:et:ts=4:sw=4:ft=udevrules:
# /etc/udev/rules.d/92-my-media-automount.rules
# Only work on sd*
KERNEL!="sd[a-z]*", GOTO="my_media_automount_end"
ACTION=="add", PROGRAM!="/sbin/blkid %N", GOTO="my_media_automount_end" .....
I notice the directory is made successfully up inserting the usb HD, but the mount doesn't succeed. If I manually execute above command, the mount goes ok.
Debian Hardware :: Udev Rules For Partitoned Usb?
Apr 23, 2011I am using Debian Squeeze on my laptop an now I want to write udev rules. I bought an USB enclosure for my old Desktop HDD drive (Debian lenny ). But when I plug it in only the first primary partition gets mounted so I can not copy the data from my old desktop to the laptop. the output of mount shows that the following disk was mounted/dev/sdb1 on /media/disk type ext3 (rw,nosuid,nodev,uhelper=hal)
I can cd into /media/disk/etc and cat fstab shows the following:
# /etc/fstab: static file system information.
#
[code]...
Debian :: Hardcode Device Input Using Udev?
Jun 7, 2011My touchscreen "LG Display LGD-MultiTouch" will be recognized sometimes as /dev/input/event0 and sometimes as /dev/input/event3. How to hardcode /dev/input/event0 using udev and xorg.conf?
Code:
# cat /proc/bus/input/devices
I: Bus=0003 Vendor=1fd2 Product=0064 Version=0100
N: Name="LG Display LGD-MultiTouch"
P: Phys=usb-0000:00:1d.7-4.1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=1b
B: KEY=403 0 30000 0 0 0 0 0 0 0 0
B: ABS=700 3f
B: MSC=10
# udevadm info --query=all --path=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.1/1-4.1:1.0/input/input0
E: PRODUCT=3/1fd2/64/100
E: NAME="LG Display LGD-MultiTouch"
E: PHYS="usb-0000:00:1d.7-4.1/input0"
E: UNIQ=""
E: EV==1b
E: KEY==403 0 30000 0 0 0 0 0 0 0 0
E: ABS==700 3f
E: MSC==10
E: MODALIAS=input:b0003v1FD2p0064e0100-e0,1,3,4,k110,111,140,141,14A,ra0,1,2,3,4,5,28,29,2A,m4,lsfw
E: SUBSYSTEM=input
Debian :: Spring On Wheezy But Not Jessie
May 19, 2015I've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
Debian :: Install Octave 4 In Wheezy
Nov 19, 2015I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure
checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no
configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.
I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.
Debian :: When Gnome 2.32 Might Be Ready For Wheezy
Jun 1, 2011when gnome 2.32 might be ready for Wheezywhen gnome 2.32 might be ready for Wheezy. I'm in hopes that Wheezy will NOT have gnome3, and I'm somewhat confident of that, but I play in both Debian and Ubuntu and I'm thinking about trying to get the Ubuntu devs to port Debian's gnome version 2.32 into their Oneiric Ocelot via package 'gnome-desktop-environment'. (It's currently at 2.30).
View 5 Replies View RelatedDebian Installation :: Wheezy To SSD Drive?
Jan 6, 2013Just re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.
Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?
Debian :: Wheezy Errors After Upgrades
Nov 11, 2015I have upgraded the packages on wheezy and I see lots of errors
Code: Select allaptitude update aptitude upgrade.
I see Code: Select allErrors were encountered while processing:
mysql-server-5.5
ntp
rsyslog
apache2.2-common
apache2-mpm-prefork
apache2
bind9
corosync
[code]...
Still I am not able to install the dependencies.
Debian :: Upgrading The Squeeze To Wheezy?
Jul 12, 2011My Squeeze version is extension three and I had it loaded on my Seagate 1 TB SATA drive. Extension three Squeeze is still on the SATA drive. I loaded Wheezy on my 80 GB Western Digital IDE setup up as a master with my Plextor IDE CD/DVD ROM setup as the slave drive.
Squeeze on my version was LXDE and Wheezy on my version is Gnome gdm3. My Squeeze was loaded with Lilo 22.8 and my Wheezy worked with the regular bootloader. I am just wondering if I use Disk Utility to delete the extension three of Squeeze if it will make both versions unusable.
Debian Configuration :: Kernel 2.6.38 In Wheezy?
Apr 11, 2011This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies View RelatedDebian Hardware :: Adding 4 TB HD To Wheezy
Sep 6, 2014I will preface this post by stating I am a beginner in Linux in general. I am trying to add a 4TB hard drive to my LVM set up. I started by partitioning the disk using fdisk. After that I went to add the disk as a physical volume. When I ran pvdisplay I noticed that the disk was only showing as 2 TB.
After some research it appears that anything over 2 TB isn't supported by fdisk. Instead I need to use "parted" or "gdisk" . So I used the following command "sudo gdisk /dev/sda" and recieved this,
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if you don't want to convert your MBR partitions to GPT format!
I was about to pull the trigger and enter "w" when I saw the message "THIS WILL OVERWRITE EXISTING PARTITIONS" which scared me away.
So does this message only refer to the previous partition I had created on /dev/sda? Or is it all partitions?
Debian Configuration :: Udev / Systemd Change Some Rules In 8.0
Apr 18, 2016I have SSD drives without SCT support, because of this I want to tune /sys/block/device-name/device/timeout in order to force mdadm put these drives offline. So, I can see my drive like this:
/dev/disk/by-id/ata-OCZ-SABER1000_A22MJ061512000074.
Where can I tune /sys/block/device-name/device/timeout from 30 to 7 sec only for these drive? I don't want to use rc.local.
Can I create right udev rules for it in /etc/udev/rules.d?
I want to avoid any conflict with /lib/udev/rules.d.
Code: Select all# udevadm monitor --environment --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
UDEV [9302.549485] add /devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0 (scsi)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0
DEVTYPE=scsi_target
SEQNUM=5210
SUBSYSTEM=scsi
[Code] ....
Debian Configuration :: Udev Rules To Change R/W Permissions?
Mar 28, 2011I'm trying to allow non-root account to use avrdude to program mucrocontrollers. There are many articles online about how to do that, but it seems not to work for me. Every time i try to execute avrdude it says "permission denied". Here's "$ udevadm info --name=/dev/bus/usb/002/011 --attribute-walk" says looking at device '/devices/pci0000:00/0000:00:1d.1/usb2/2-1':
KERNEL=="2-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""
[code]....
However, after restarting udev, replugging the device, even rebooting the computer I still get "permission denied". The Vendor and Product match, so what's the problem?
Debian :: Custom Udev Rules Not Taking Place?
Mar 20, 2011I'm trying to write udev rules to make it easier to recognize the network cards in my server. After a reboot it doesn't seem to take place, what am I doing wrong? I'm running Debian Squeeze stable.
Code:
$ uname -a
Linux debian 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 GNU/Linux
Code:
# ls -l /etc/udev/rules.d/
total 4
[Code]...
Debian :: Fresh Install Shows Udev Failure
May 10, 2011I've just installed 'Testing' on a VMware server and after I completed the install with no problems, the system booted into the kernel and I noticed the following start up process error:
Code:
startpar: service(s) returned failure: udev...failure!!!
I have not seen this before and am not sure if it's related to the fact that this is a virtual machine and not a physical server or something else. Here is a Screenshot.
Debian :: Reset/remove Udev Persistent-net-rules?
Apr 30, 2011I should create a sqeeze image and install it on other computers.Udev should detect network card (NIC) module and load it automatically at startup.How I understand /lib/udev/rules.d/75-persistent-net-generator.rules runs when udev starts, then writes to /etc/udev/rules.d/70-persistent-net.rules.The problem is, udev searches for this NIC on other hardware and the network cannot start.I can solve this problem easily using a startup script to delete /etc/udev/rules.d/70-persistent-net.rules file.
View 2 Replies View RelatedDebian :: Can't Access System Settings - Wheezy
Jun 8, 2013Every time i click 'System Settings', it says that it is Starting, but nothing else happens after that. I can access 'Advanced Settings', but not 'System settings'. A
View 13 Replies View RelatedDebian :: No Internet After Upgrade From Wheezy To Jessie
May 27, 2015I upgraded my Wheezy 7.8 to make sure all packages were installed Before taking the next step to upgrade to Jessie.I upgraded to Jessie and it seemed to run OK....but after reboot I had no network Connection..I checked ifconfig and the wrong network card mac address is being assigned to the wrong card....?I have a clonezilla server on my server, so this was my network interfaces before and after upgrade
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[code]...
I even checked nano /etc/resolv.conf and sure enough my gateway was the same for my Internet eth0.When I ran ifconfig I could see that the eth0 mac address was set as eth1..I tried to reset my drbl for clonezilla but that only sees the vmware Connection and not my actural cards.. have taken alook at /etc/udev/rules.d/70-persistent-net.rules and the assignment is right but not ifconfig?
Debian :: Wheezy To Jessie Upgrade Will Not Boot
May 28, 2015With "quiet" removed from the grub linux line, I'm getting the following error messages when the boot hangs up early in the boot process (19.768231 seconds into boot).:
input: HDA NVidia HDMI/DP,pcm=3 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
So, is this a NVidia issue or a sound card issue?
Debian :: Samba - 7.0 Wheezy And Windows 7 Cannot Login
Feb 23, 2016I'm using Windows 7 & Debian Wheezy,and samba is the software that I use to share the folders/files for Linux & Windows.
The issue is one of my users(nv) cannot login to her folder in Linux using his windows credentials(the password keep prompt).But If I'm using my windows password she can access to her linux folder.But it is a temporary solution as when she restart the pc,the password authentication will prompt again.
This is my smb.conf file:
==============================================================================================
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
[Code] .....
Debian :: Compile MPV On Wheezy - Harfbuzz Required
Mar 2, 2016How to compile mpv on wheezy? if requires nowadays "harfbuzz" and says
configure: error: Either DirectWrite (on Windows), CoreText (on OSX), or Fontconfig(Linux, other) is required. If you really want to compile without a system font provider, add --disable-require-system-font-provider
but if if i do
./rebuild --disable-require-system-font-provider
is still get same error. i really need mpv on wheezy because jessie is too new for system. it used to work some months ago.