Debian :: Can't Install JDK 8 In Wheezy
Apr 19, 2015
I dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:
Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$
I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....
Code: Select alllrwxrwxrwx 1 root root 22 abr 19 18:57 java -> /etc/alternatives/java
I've tried different tutorials I found surfing the web but none of 'em seem to work.
View 2 Replies
ADVERTISEMENT
Nov 19, 2015
I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure
checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no
configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.
I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.
View 1 Replies
View Related
Jun 13, 2011
I know from a myriad of posts on these forums that Ubuntu is more bleeding edge than Debian Testing. Since, Debian'w own kernel is misbehaving rejecting my video chip (i915), I am tempted to install Ubuntu's kernel in Wheeze.
So, the golden question is: Is it logical and feasible to install Ubuntu's kernel in Wheezy? Wheezy's kernel is 2.6.38.
View 4 Replies
View Related
Apr 23, 2015
I have a laptop primarily used for a client work. It is running Debian Wheezy, and wish to keep it intact in case I need to do more work for client.
I would like to install Ubuntu 14.04 alongside Debian, and use Ubuntu as a bit of a play/experiment area, etc... HD has lots of space (600GB free), and as far as I can tell Grub is installed in MBR.
I did some searches, and from what I can tell, it sounds like I can just install Ubuntu from ISO file, specify how much space to use (say 400GB), and that's it. This sounds almost too easy. Once I install and restart machine, will there be selection for what Distro to boot.
View 6 Replies
View Related
Apr 7, 2011
I have just installed Wheezy after repartitioning and had to set up my sources list myself as (most of it) was not done for me. I have just added the main official repository,security updates and the multimedia repository. To be honest I'm not sure if any of them are working when I do an update in aptitude, I think the multimedia one might be. The CD ROM isn't even working despite the fact I have done apt-cdrom add.I am getting the following when run aptitude update:
Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1 20110328-05:16] wheezy InRelease
Ign cdrom://[Debian GNU/Linux testing _Wheezy_ - Official Snapshot i386 CD Binary-1
[code]....
View 6 Replies
View Related
Mar 24, 2015
I managed to install LibreOffice. I've only a little experience with Ubuntu and none at all with Debian.
My 1st project is relatively simple. Pro Screenwriting software can be kinda costly, a hundred & change, at least.
With expanding contests, YouTube & the like, writers interest has been growing; and these day most submissions are pdf not paper. (The BBC Writersroom is a fantastic resource, and even allows unsolicited submissions). [URL] ....
Some years ago, Alan Baird got an award from Sun Micro for developing a set of free format templates called Screenwright for Open Office. Including both US & A4, as well as radio, sitcom, theatre and movies; these have now been ported to Libre Office under Creative Commons usage. [URL] ....
I believe these should work well and fairly fast on the new Pi, as most spec scripts are vastly more white space than word count.
There is a minor problem tho, which first came up with 'New Courier' on Windows machines. The 'page per minute' rule is still important enough that the different line/page length spacing of 'Courier-like' fonts is unacceptable in a submission.
The standard Courier font can be had from [URL] ....
That font set is a zip file which should be extracted and then the 3 fonts are to be dragged into the Windows fonts directory.
So how exactly do I do that with Rasperian Wheezy? Do I extract on the Pi or on the windows machine? Are fonts like most documents, readable on any distro, or do they need to be converted somehow?
View 11 Replies
View Related
Jan 18, 2015
So the other day I installed Debian Wheezy on my Sun Blade 150. While the OS is installed fine, all the webkit based browsers continuously crash after a few pages. So, I tried to download IceWeasel since it wasn't installed when I tried installing Debain off the DVD. The only problem is, it won't install as the Xulrunner version it requests is xulrunner-24.0_24.5.0esr-1~deb7u1_sparc, however the only version available on the repositories is newer. Is there any way to get the older xulrunner version, or is there going to be a fix for IceWeasel soon on Sparc?
View 3 Replies
View Related
May 2, 2011
I'm having all sorts of problems after doing my first update (#1. safe-upgrade, #2. full-upgrade) in over a month.
Anything from no Nvidia linux-headers being found to any VT not working. After completely removing all of the previously tried Nvidia presence on my PC, is there a safe way for me to install the non-free drivers?
View 8 Replies
View Related
Apr 2, 2015
I love using wheezy but i keep having to take my computer downstairs to hook it up to router through ethernet, i need it to connect through wifi and stay connected.
heres my problem, if i use live image and connect to network its fine but during installation process it gets to the network configuration, it will keep disconnecting at dhcp and if i try and continue it gives me the error packages broken due to it not staying connected.
MY WIFI CARD IS A TP-LINK WDN 4800
if i try and just do a net install then it doesnt show my wifi network.
it uses in both cases ar93xx atheros driver for installing, i just need to know how i can try and keep a stable connection over wifi so it can install over wifi so i dont have to keep taking pc downstairs to install it.
i done something that stopped me being able to login into wheezy i was left at black screen with blinking command line, i have reverted to mint debian until i can get a stable connection over wifi to install wheezy again.
View 14 Replies
View Related
Apr 22, 2015
When i finish install debian7.8 wheezy in my Acer computer(graphics :GT750M+ Inter HD Graphics Family),
it appear:
"GNOME3 Failed to Load"
" Unfortunately GNOME 3failed to start properly anmode"
"This most likely means your system(graphics hardwcapable of ....."
i check system's Driver status:Gallium 0.4 on llvmpipe(LLVM 0x209) Experience Fallback so i try to install nvidia drivers in debian,but i have failed many times. everytimes i finish install nvidia drivers i 'startx " failed
View 3 Replies
View Related
Jul 26, 2014
I have a VIA Epia M 5000 system with 2 western digital 1TB NAS SATA drives connected through SATA<->IDE adapter. Everything installs and writes as expected except... grub. It never boots, after a message 'Grub loading' I always get 'error: no such disk'. I've tried numerous times and has been attemping to fix the issue for the past 2 days.
/dev/sda
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect, logical partition
/dev/sdb exactly the same
0.999TB 0xfd linux raid autodetect partition
1GB 0xfd linux raid autodetect
/dev/md0
RAID1 of /dev/sda1 and /dev/sdb1
marked as ext4, boot point /
/dev/md1
RAID1 of /dev/sda5 and /dev/sdb5
marked as swap
update-grub2 in rescue mode generates grub.cfg with SET root=/mduuid/UUID_OF_SDA1
then after that there's search --no-floppy etc --set root=/mduuid/UUID_OF_MD0
I'm writing this from memory but simply the two uuids are different. Is this correct? I get those UUIDs to compare from blkid. All partitions are marked as bootable. grub-install /dev/sda and grub-install /dev/sdb produces no errors. grub-install /dev/md0 does not work, complains about superblocks or something similar.
Grub.cfg file contains insmod raid mdraid1x and similar lines, so that should be ok. Grub drops to rescue mode with message error: no such disk. Not device, but disk. Google finds many results for 'no such device' error, but I am not getting that error. 'ls' produces
(hd0) (hd0,msdos1) (hd1) (hd1,msdos1) ls ANY_VALID_PATH produces empty newline being printed, nothing more.
setting prefixes manually does not work, with error message 'error: file not found'. ls (hd0,msdos1)/boot/grub also produces empty line being printed. Rescue CD and auto-assemble of md0 and md1 works, the files are there, everything okay, except grub.
View 3 Replies
View Related
Oct 17, 2014
I am trying to install Debian wheezy 7.6 stable, i made a bootable pen drive with netinst but when it arrives the select and install software part i got a error that i cant know what error is because it does not show its name. Just appear a red screen saying that a part in installation fails: Select and install software. I guess that this error is when it is installing tasksel.
View 2 Replies
View Related
Apr 19, 2011
anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
View 13 Replies
View Related
Aug 26, 2011
Has anyone had any luck in trying to install wheezy (latest testing snapshot available) on any system with either a AMD/ATI 68xx or 69xx card?All goes well in the install, but on reboot, all that is seen is a "_" and no text, and it hard locks.I am pretty sure this is a conflict with the video card drivers that get installed by default (and which should be blacklisted), but I have no idea how to fix it.The recovery mode don't work either, it is the same "_" with no text, and it ends up hard locking. There is no chance at getting access to a console at all.
View 5 Replies
View Related
Aug 12, 2014
Install cifs-utils on wheezy armhf
apt-get install cifs-utils --fix-missing
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
View 7 Replies
View Related
Feb 22, 2015
uname -a
Code: Select allLinux OpalMint 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
lspci -nnk | grep -iA2 net
Code: Select all01:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e058]
Kernel driver in use: ath9k
[Code] ....
View 14 Replies
View Related
May 22, 2011
Downloaded and copied to a usb pen drive the latest debian testing snapshot netinstall iso:
wget url
then
dd if=debian-testing-amd64-netinst.iso of=/dev/sdb
Everything went fine, even the install part.After the 1st boot, problems started. I've never seen so much errors after a first install and probably they are all reported.
1. ata_id[297]: HDIO_GET_IDENTITY failed for '/dev/sdb'
2. mkdir: cannot create directory `/run/udev/rules.d/': Read-only file system
3. startpar: service(s) returned failure: udev ... failed!
4. INIT: Id "co" respawning too fast: disabled for 5 minutes
5. eth0 doesn't automatically start; one has to start it via ifup eth0
After that, installed a minimal xserver-xorg-core, xserver-xorg-video-radeon and kde-plasma-desktop.
I'm unable to use the newly DE environment, the screen just freezes, I'm guessing because of the udev error.
I have to restart via Magic SysRQ key:
Alt+PrtScr+S > Alt+PrtScr+U > Alt+PrtScr+B
View 4 Replies
View Related
Sep 3, 2011
i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies
View Related
Mar 30, 2011
I am giving Wheezy a whirl and am having with screen blinking ever 30 seconds.
View 5 Replies
View Related
Nov 29, 2010
But when Squeeze goes from 'testing' to 'stable' in December... does Wheezy get promoted from 'sid/unstable' to 'testing' at the same time?.
I started my life in Linux with and currently use Ubuntu, and it runs decent(barely). However, I just upgraded to Ubuntu 10.10, and because of strange little issues and increasing bloatware, I have been forced to strongly consider the "mother OS": Debian.
The reason for my original question is that I want to run whatever the current "testing version" is. And if Wheezy gets promoted at the same time Squeeze does, then I will just wait the 4 weeks instead of slogging through another install(I prefer fresh installations vs upgrading within). I know the test versions of Debian are a bit more active than stable, but I have used Ubuntu for over 2 years, so I have some experience dealing with Terminal commands, package management, gnome, etc...I am also currently VirtualBoxing a copy of Squeeze.
View 6 Replies
View Related
May 20, 2011
I got "stuck" with stable up to now and want to upgrade to Wheezy. But, although I've done this before, I'm having a dependency problem I wanted to ask about before breaking my system somehow. This is the /etc/apt/sources.list, ready for Wheezy:
[URL]
So, I regularly use aptitude as my package manager. After updating the database with aptitude update, trying aptitude full-upgrade gives me a huge of conflicts.
[code]....
But, if I use apt-get dist-upgrade, I get no conflicts. if I dist-upgrade with apt-get, will that affect my daily usage of aptitude (which I prefer)? I know APT is a single database and apt-get and aptitude are just different interfaces, but I guess differences might rise when marking packages as automatically or manually installed.
View 7 Replies
View Related
Aug 7, 2011
Is it possible to run kde in Wheezy without udev? I am asking this because the modesetting failure is manifested as soon as udev tries to populate the /dev directory.
View 6 Replies
View Related
May 19, 2015
I've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
View 0 Replies
View Related
Jun 1, 2011
when gnome 2.32 might be ready for Wheezywhen gnome 2.32 might be ready for Wheezy. I'm in hopes that Wheezy will NOT have gnome3, and I'm somewhat confident of that, but I play in both Debian and Ubuntu and I'm thinking about trying to get the Ubuntu devs to port Debian's gnome version 2.32 into their Oneiric Ocelot via package 'gnome-desktop-environment'. (It's currently at 2.30).
View 5 Replies
View Related
Jan 6, 2013
Just re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.
Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?
View 7 Replies
View Related
Nov 11, 2015
I have upgraded the packages on wheezy and I see lots of errors
Code: Select allaptitude update aptitude upgrade.
I see Code: Select allErrors were encountered while processing:
mysql-server-5.5
ntp
rsyslog
apache2.2-common
apache2-mpm-prefork
apache2
bind9
corosync
[code]...
Still I am not able to install the dependencies.
View 13 Replies
View Related
Jul 12, 2011
My Squeeze version is extension three and I had it loaded on my Seagate 1 TB SATA drive. Extension three Squeeze is still on the SATA drive. I loaded Wheezy on my 80 GB Western Digital IDE setup up as a master with my Plextor IDE CD/DVD ROM setup as the slave drive.
Squeeze on my version was LXDE and Wheezy on my version is Gnome gdm3. My Squeeze was loaded with Lilo 22.8 and my Wheezy worked with the regular bootloader. I am just wondering if I use Disk Utility to delete the extension three of Squeeze if it will make both versions unusable.
View 4 Replies
View Related
Apr 11, 2011
This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies
View Related
Sep 6, 2014
I will preface this post by stating I am a beginner in Linux in general. I am trying to add a 4TB hard drive to my LVM set up. I started by partitioning the disk using fdisk. After that I went to add the disk as a physical volume. When I ran pvdisplay I noticed that the disk was only showing as 2 TB.
After some research it appears that anything over 2 TB isn't supported by fdisk. Instead I need to use "parted" or "gdisk" . So I used the following command "sudo gdisk /dev/sda" and recieved this,
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if you don't want to convert your MBR partitions to GPT format!
I was about to pull the trigger and enter "w" when I saw the message "THIS WILL OVERWRITE EXISTING PARTITIONS" which scared me away.
So does this message only refer to the previous partition I had created on /dev/sda? Or is it all partitions?
View 6 Replies
View Related
Jun 8, 2013
Every time i click 'System Settings', it says that it is Starting, but nothing else happens after that. I can access 'Advanced Settings', but not 'System settings'. A
View 13 Replies
View Related
