Im running Pure:Dyne, an audio-centric distro, and so far I have not been able to get my usb modem to work. Im using a Huawei EC168 and my carrier is Alltel. Im totally new to Debian as well... Im doing this off of a live disc then I plan to install it once I know Ill be able to use my internet (its my only internet...) The card doesnt seem to be recognized other than as a storage drive or something, since its preloaded with the software for windows that comes with it.
Since my recent re-conversion into Ubuntu, I noticed Network-Manager now has mobile broadband support out of the box. Splendid!
I've been using my Huawei (Vodafone) modem since around two weeks, and so far it's been great, except for a little detail: sometimes, them modem simply won't work. I plug it in, "cd" drive (where the Vodafone Mobile Connect files are) shows up, but no "Vodafone" on Network-Manager. I believe this has something to do with settings the modem may leave behind after each use, but I'm quite newb, so.
So here's the thing: I have a mobile broadband pcmcia card that worked just well on jaunty, but as I installed karmic it doesn't work, coz it mounts the card's storage but doesn't recognize the hardware. The help says I need the package 'udev-extras', but there's no such package for karmic and the one for jaunty doesn't work with karmic.
1) does squeezy allows out of the box work for huwai dongle/ mobile broadband? (i never was able to configure mobile broadband in lenny thus i couldn't have kept lenny in my pc for more than 3 hours)
2) if i install squeezy (which status is 'testing' at the time being), do i need to reinstall squeezy once it becomes 'stable'?
3) any major difference between squeezy/debian and ubuntu?
Here are my Specs: Netbook: HP Mini 210-1012EZ Network Card: Broadcom Corporation BCM4312 802.11b/g (rev 01 Ubuntu: 10.04 Netbook Remix CPU: 32Bit
Wired and Wireless Networks work perfectly the only issue is the Mobile Broadband. When I try to setup my Mobile Broadband connection manualy using the Network Connections Manager the device drop-down is grayed out and it doesn't seem like my network card is being recognized as a Mobile Broadband Card. When I had Windows 7 installed and started ubuntu over a USB Drive the connection worked great. I've followed the steps at [URL] too and it all checked out.
I found another idea in a thread here and I've tried that too: I added the following line to my /etc/modules: echo b43 | sudo tee -a /etc/modules I've also tried using the Broadcom STA drivers that ubuntu offers but it doesn't seem to make any difference.
i have just recently installed linux mint 9 with the KDE desktop, i am very happy about it... the problem i have encountered is setting up my 3 Mobile broadband USB dongle, other linux distros just recognised it instantly, but i cannot seem to install it in this one, could someone help me at all, please in a simple as possible description as i am still really new to linux, its a huawei dongle
I have mobile broadband which is T-Mobile UK. The modem is a Huawei E160 and on a Ubuntu page, it says that this modem doesn't work at all. That's the only internet source I have so I need to be able to use it. tried to install usb_modeswitch and I'm going to test a different piece of software later. My version of Ubuntu is 10.04.
I have just installed fedora12 from the Live CD couldn't get my mobile broadband to work on the Live CD, thought I would go ahead and install anyway and hoped for more success from the installation.
But nothing seems to work. I have tried just plugging it in and waiting for it to be registered, I have tried various manual set ups including enabling point to point encryption in the VPN manager and nothing seems to work at all.
The device is a Huawei K3520 USB modem.
Am I just doing something really stupid or is there some obscure method to get this working.
This is the only internet connection which i have available at the moment so anything I download will have to be done through Windows and copied across, i.e. I can't use YUM.
lsusb returns the following:
Not sure where the E620 comes from the model number on the case is k3520
I have an Asus K50IJ laptop and everything works great, but now I'm moving house and need to switch to a mobile broadband dongle. From what I can tell the major providers here in the UK don't support Linux, so I'm hoping someone can help me with the question of mobile broadband on debian and what does and doesn't work by default. I'm happy to get my hands dirty and keep learning about linux and debian, but I'm definitely still a beginner in both. I couldn't find what I needed searching the man pages, wiki or forum, but point in me in the right direction if you think I've missed something useful. Ideally I'd like to use Virgin Mobile so I've asked them for specs on the dongle they supply and I'll post that info when I get it. Any help would really be appreciated as I rely on the internet pretty heavily.
1st post in Debian Forums, just came from Arch...and segmentation fault and wine are the 2 special reasons for my return, it's a great distro but i miss the stable part of the deal.I'm a performance guy and i want to know what you use for mobile broadband connection (USB Pen) with exception of course of network manager, even with 8GB of RAM to deal with i want to keep my Debian Squeeze simple, better said:netcfg / wicd for networkpptp client for vpn........ for mobile broadband
I have a new hard-drive and have installed squeeze using CD 1. As my mobile broadband is the only way I can connect to the internet, how do I get it working on a fresh install?
I am trying to tether internet from my LG Leon to a new debian 8.1 install so i can install network drivers but i keep getting disconnected.After activating the tethering, it works fine, and appears as a "wired" connection in Network, after a minute it will always change from wired to "Mobile Broadband" and asks me to select my "Network". (Then the internet doesn't work until tethering is reset.) Is there any way i can stop debian from doing this? The silly thing the internet works perfectly until it shifts it like this.
Booting debian with xfce desktop (8.2, amd64) using a live cd of iso hybrid. While a wired network can be easily connected using network manager, it fails to recognize the mobile broadband (I am using a USB dongle). The network manager gui disappears after I select `Mobile Broadband'. Moreover, Code: Select allnmcli -p con does not recognize the gsm connection, but Code: Select allnmcli dev status returns that a USB gsm connection is present at ttyUSB3.
I have a fresh install of squeeze without a desktop environment. I then installed a basic gnome environment so I can choose my own apps ('apt-get install gdm3' pulls in enough for that). I then had to install some packages to get mobile broadband working:It all works fine until I disconnect it via Gnome network manager. I cannot reconnect using Gnome network manager because it doesn't show in the menu, but it does show while I'm connected. If I pull the dongle out and plug it in again, it reconnects without issue.I think I may be missing some packages, but I don't know what. I tried usb-modeswitch, but no change
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
I've just installed Debian 7.6.0 with KDE onto my laptop and now I want to connect to the internet with my Mobile Broadband dongle. When it's plugged in, I follow the icon in the taskbar to the Network Connections window.
Then I try to add a MBB instance with the pop-up assistant. After I've answered all the questions another pop-up tells me:-
"Insufficient privileges"
What's going wrong here and how do I get Debian to work the dongle (which works on my Desktop Debian 7.5.0 that uses Gnome)?
I installed Debian Squeeze on my Acer AspireOne yesterday, and was delighted to see that my ZTE MF627 broadband dongle (from 3 UK) appeared to work "out of the box". I wasn't able to connect due to lack of signal, but the behaviour was as I expected. (The dongle is one with a "zero CD" that needs to be ejected before the modem itself can be accessed. Recent versions of udev are supposed to do this automagically.)
However, when I tried to use the dongle today, I was unable to make it work. It appears that udev is no longer ejecting the zero CD when it is inserted, but is instead detecting the modem as a (non-functioning) serial port.
Here is the output from /var/log/syslog for the "successful" attempt. Note the disconnection at 4769.479857 which is followed by reconnection as a different device:
Jan 16 14:11:30 john-netbook kernel: [ 4759.175449] usb 1-2: Product: ZTE CDMA Technologies MSM Jan 16 14:11:30 john-netbook kernel: [ 4759.175459] usb 1-2: Manufacturer: ZTE,Incorporated Jan 16 14:11:30 john-netbook kernel: [ 4759.175762] usb 1-2: configuration #1 chosen from 1 choice Jan 16 14:11:30 john-netbook kernel: [ 4759.180622] scsi3 : SCSI emulation for USB Mass Storage devices Jan 16 14:11:30 john-netbook kernel: [ 4759.181863] usb-storage: device found at 4
I have read that Ubuntu 9.10 does not support Huawei EC1260 mobile broadband dongles. As a result, I am using Ubuntu 9.04 still now. How will I use it in 9.10? Or,will it be supported in 10.04 or any other later version?
In the previous versions of Fedora, the check for updates when connected through mobile broadband appeared disabled, which made sense as I don't want updates when connected through a mobile phone but will wait until I'm connected through either ethernet or wifi.
Took my laptop into work on Friiday (9am Friday is the time concert tickets go onsale). Connected to mobile broadband using Fedora 14 and got the updates available icon, surely this shouldn't happen?
I installed fedora 15 on my PC with AMD II X2 CPU with tata photon+ connection. Internet connection working good in Ubuntu 11.04 and windows 7 on same PC. But on fedora 15 with gnome 3 its not working with same configuration?
I installed slackware on my laptop last night, :-) very happy. Can't wait to learn more about linux and even computers in general. I've already learnt heaps since entering the alternative operating system world. Anyways, i've got xfce up and running with slack now, created a new user 4 my self. And now i'd like to get some updates and stuff, but i need to use my mobile broadband. It's a telsta dongle If that changes the circumstances. How would i go about setting this up?
Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
I tried at Fedora 10, didn't work, and then Ubuntu 9.0.4, in the hope of it may work, my CDMA 1x Mobile broadband.( it works well under Win XP). and it didn't work.And then it comes the Fedora 11, still the same problem.
Seems Linux cannot recoginize my CMDA 1x Mobile Bbroadband, becuase the newwork manager doesn't pop up with messages of detecting a new hardware.
And when I run the desmeg:
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.4-167.fc11.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found
I'm completely lost. Thought i was'nt a newbie anymore, but obviously i am. I have a USB HSDPA modem ZTE MF628. Figured out how to change from USB CD device tot modem, but still cannot get it to work, Especially how to get it showing up in NetworkManager as a mobile broadband device. Some output (after usb_modeswitch):
Code: $ lsusb Bus 004 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0ac8:c326 Z-Star Microelectronics Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc.
