Debian :: File Sharing On Windows Client Using Samba
Oct 1, 2010I am new to debian. How to configure debian 5 on file sharing on windows client.
View 10 RepliesI am new to debian. How to configure debian 5 on file sharing on windows client.
View 10 RepliesI have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I'm using [URL] to help set up my server for windows file sharing. I accedently pressed unix file sharing and now i can switch it to windows file sharing.it would be fine to uninstall the Unix file sharing and replace it with the windows counterpart.I have Ubuntu desktop 10.04 (because i keep getting an error with the kernel with the server editions)
View 1 Replies View RelatedI just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
View 6 Replies View RelatedIm using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedI have a win XP box and want to share files on this win XP box In Ubuntu 10.10 I previous used, I just connect the win XP sahred folder via file browser without any username and password. In my Debian Squeeze, when I connect to my win XPIt poped up a window and asked me the username and password. But I don't set any password in my win XP even my administrator account. How can I do to make my connecting to win XP smoothly like the Ubuntu does?
View 1 Replies View RelatedI've enabled Samba share on Fedora firewall... now i can view the shares on Windows Computers on my network but Windows PC can't see my shares on Fedora...
Also my wireless Router/Modem (D-Link DSL G604T) reports the names of the Windows PC connected to it but names my Fedora Machine as unknown...
I have a laptop on which i connect to internet using dialup modem.my laptop is also connected to a linux box via lan.now i want to connect to internet from the linux box, using internet connnection sharing from widows xp installed on laptop
View 8 Replies View RelatedI shared home folders to be accessible from a Windows XP notebook computer which my wife uses some times. One of the folders contains many pictures which I later renamed (bulk rename at the ubuntu box). The pictures at the Windows box still have the old name and they can be opened as usual. However, when my wife rotated a picture and saved it with the same name, the picture just disappeared. For some reason It can not display the new names. I removed the Thumbs.db files, restarted samba and re-configure again the connection with samba but no luck. It is not a big problem but I was wondering if someone knows what this is happening?This is my samba config file:
Code:
[global]
workgroup = WORKGROUP
server string = %h Ubuntu
dns proxy = no
[code]...
We are running RedHat Enterprise Server 5. We have a Windows 7 Pro with an HP Printer attached to it, and shared. I can see the printer in RedHat, but everytime I send a print job, it just does nothing but sit there. I've even tried to attach to it via smbclient, and I get the following response: tree connect failed: NT_STATUS_BAD_NETWORK_NAME
View 4 Replies View RelatedI want to share folder in fedora 12 so that any windows user can access my folder (without modifying its content) and there should be no password to be entered by the windows user. I tried samba gui but the folder does not open using windows.
View 3 Replies View RelatedI am using ubuntu 10.04 .I tried to share my files on windows network using samba , I changed theworkgroup name in samba configuration file ..but it dint work for me will you please tell me the exact procedure to share the files on windows network ..
View 7 Replies View Relatedi am able to set up samba server with adc it is working properly. also i set the GID and stikki bit permission in sharing so i can set only crater can delete the files. But i want some users have ability to delete permission for all files and folders in that sharing
I am not able to set that
I've got a problem while sharing file through samba.
My smb.conf is here:
Then i restart my smb service, and i found the 'shared' folder on windows, but I can't access it.
I am running OpenSuse 11. It runs Apache webserver and Samba for filesharing. I am also running webmin. Everything works 100%. I have 2 shared folders that can be accessed by everyone. My question is how can I log in to the shared folder from a windows machine when I set the permissions for only a certain user to log in. My system hostname is Linux.site and my user is henk. I am not sure how I need to log in that way. Should the username be Linux.sitehenk ...
View 1 Replies View RelatedSuppose I have installed a Ubuntu (UNR9.10) PC in my home LAN,-> am I right that I need to have Samba server installed before I can share folders & files (mainly large media files) in the harddisk of Ubuntu PC for read/write access by other LAN PC running WinXP?
-> am I right that Ubuntu PC cannot access (read or write) USB harddisk nor USB thumbdrive as formatted by WinXP? how about SD card through USB card reader? does UNR v9.10 contain Samba or do I need to install it separately after UNR installation? where can I find the instruction for installation and configuration of the samba server?
I am at a total loss. For all intents and purposes - sharing files over a lan without a password between this ubuntu 10.04 machine and my wifes laptop (windows 7) should be trouble free. I've installed samba, and created an smb.conf file in /etc/samba
Code:
[global]
workgroup = WORKGROUP
server string = Samba Server
netbios name = oak
security = share
[Code]....
I want to note that I was using Arch Linux and this exact setup worked flawlessly. Why on earth would it not work the same in Ubuntu? Is it not the same Samba?
I've been trying for what seems like forever to share a single directory with only two authorized users and I just can't get the permissions right.
Running Ubuntu 10.04 desktop as home file/print server.
Two users: chris and gretchen
Directory to share: Music
Music resides in chris' home folder.
I'd like to have full access for these two users and no access for anyone else. The challenge is that the best I can get for gretchen is read-only. What i've done so far:
Created user accounts for each
Created Samba accounts with passwords for each
Created a group called "family" and added chris and gretchen to it
Assigned the family group to the Music folder.
Shared the folder giving read and write access to family group.
chris seems to work ok but when gretchen access it from her snow leopard laptop she can't create a new folder. It should be noted that chris is also the admin account.
1> i have centos5.4 fileserver.
i synchronize my document of windows xp with fileserver through samba server.
while synchronzing ,virus effected file are also get sync in fileserver .
i scheduled copying in crontab also.meanwhile by synchronizing the fresh file get replaced by virus file.this result lost of my data.
is there is any solution to restrict virus file from copying through rsync....
2> is there is any program to compare size of files on samba server
I set up a Ubuntu Server for my home network to share among Win XP and Ubuntumachines.Initially everything worked fine with all Win XP machines being able to share files on the server; however, after I installed and setup SSH between my Ubuntu machines and my Ubuntu Server I now cannot share and/or even see my Server directory from Win XP or Ubuntu machines through the Samba.I have tried for 2 days to figure out the problem without success.Did I break something while setting up the SSH? How can I fix Samba?Here's some things I have setup or tried so far:1. Samba users are setup and were working previously.2. Samba share drives were setup and working previously.3. I can see the Server using SSH or SFTP from my Ubuntu machines.4. I have gone over the Samba config file numerous times5. I am administering Samba on the server via the terminal and Webmin
View 9 Replies View RelatedI am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code:
[global]
workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1
[Code].....
I have a very nice SUSE 11.2 Samba PDC that runs well with Windows XP clients. I am using NETBIOS for name resolution since I dont want to put in a DNS server because my router already has one, Im pretty sure it would make things more complicated. I enabled wins support in smb.conf and made the name resolve order with lmhosts first. lmhosts lists all the ip adresses with their computer names in capitals. I hope thats right. I set up my windows 7 with the reg file from the samba wiki on windows 7 [URL].
That's great now I get the old screen from XP in windows 7 when joining the domain. I gave the machine netbios name MAINPC a smb trust account MAINPC and added the unix user MAINPC$ that should all work. I manage to successfully join it says welcome to domain, afterwards an error appears "changing the dns name of this computer to "" failed" and something bout not finding the domain controller. although I joined. then I resatart and when I try to log on it says "trust relationship failed". How to make it join and logon properly.
I'd like to have my Samba client update Windows DNS then join in domain. Computer join in domain but DNS not update.
OS: OpenSUSE 11.3
Try after join in domain:
net ads dns register -d 3
[2010/08/18 20:47:17, 3] param/loadparm.c:9158(lp_load_ex)
lp_load_ex: refreshing parameters
[2010/08/18 20:47:17, 3] param/loadparm.c:4929(init_globals)
Initialising global parameters
[2010/08/18 20:47:17, 2] param/loadparm.c:4788(max_open_files)
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
[2010/08/18 20:47:17.871064, 3] ../lib/util/params.c:550(pm_process)
params.cm_process() - Processing configuration file "/etc/samba/smb.conf"
[2010/08/18 20:47:17.874091, 3] param/loadparm.c:7842(do_section)
Processing section "[global]" .....
Windows Workstation update DNS this domain. DNS mydomain.ru resolved.
i m working on roaming profile where linux is the server & windows is the client... i m implementing it using samba as pdc my linux version is 2.6.27.5-117.fc10.x86_64 but my samba server is not working windows is not authenticating my domain name following is the copy of my smb.conf file
Quote:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
[code].....
I finished setup Samba PDC with Openldap backend. I can joint Winxp client to domain but can not change pass by press Ctrl + Alt + Delete and choose Change password button
This is my conf.
I used
samba3x-3.3.8
openldap 2.3.43
slapd.access.conf
Code:
access to attrs=userPassword,shadowLastChange,sambaNTPassword,sambaLMPassword
by dn="cn=Manager,dc=microhdesk,dc=net" write
by anonymous auth
by self write
by * none
[Code]....
I have a folder, called Vault, that we want to share only with certain people. Because it will contain confidential information.
I want the unix group trustees to have read-only access I want the unix group administrators (and root) to have read/write access
All other users should have no access.
the implementation I have so far is:
folder owner: root:administrators
folder permissions: 770
section from smb.conf
[Code]....
However, this is not working as expected. It currently works as follows:
Normal user: No access (expected) Trustees member: No access (fail. Trustees should be able to read) Administrators member: Read/write access (expected)
I set up a samba file sharing system but my workgroup asks for a username and password see this-This is the text in /etc/samba/smb.conf:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
[code]...
I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View RelatedI have a machine acting as a gateway for a private network. While it can ping hosts on that private network, I can't use samba (smbclient or smbmount) to access shares on hosts on the private network from that machine. Other machines on the private network can access shares on other machines - just not the gateway server.
Here's how the gateway is configured:
When I try to connect to ports 139 or 445 (via smbclient or smbmount) the mount() system call times out. As I mentioned above, I can ping those hosts, so UDP packets work but TCP packets seem to get blocked or lost.