Fedora Networking :: Sharing File Through Samba ?
May 10, 2011I've got a problem while sharing file through samba.
My smb.conf is here:
Then i restart my smb service, and i found the 'shared' folder on windows, but I can't access it.
I've got a problem while sharing file through samba.
My smb.conf is here:
Then i restart my smb service, and i found the 'shared' folder on windows, but I can't access it.
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I am running OpenSuse 11. It runs Apache webserver and Samba for filesharing. I am also running webmin. Everything works 100%. I have 2 shared folders that can be accessed by everyone. My question is how can I log in to the shared folder from a windows machine when I set the permissions for only a certain user to log in. My system hostname is Linux.site and my user is henk. I am not sure how I need to log in that way. Should the username be Linux.sitehenk ...
View 1 Replies View RelatedI am at a total loss. For all intents and purposes - sharing files over a lan without a password between this ubuntu 10.04 machine and my wifes laptop (windows 7) should be trouble free. I've installed samba, and created an smb.conf file in /etc/samba
Code:
[global]
workgroup = WORKGROUP
server string = Samba Server
netbios name = oak
security = share
[Code]....
I want to note that I was using Arch Linux and this exact setup worked flawlessly. Why on earth would it not work the same in Ubuntu? Is it not the same Samba?
I've been trying for what seems like forever to share a single directory with only two authorized users and I just can't get the permissions right.
Running Ubuntu 10.04 desktop as home file/print server.
Two users: chris and gretchen
Directory to share: Music
Music resides in chris' home folder.
I'd like to have full access for these two users and no access for anyone else. The challenge is that the best I can get for gretchen is read-only. What i've done so far:
Created user accounts for each
Created Samba accounts with passwords for each
Created a group called "family" and added chris and gretchen to it
Assigned the family group to the Music folder.
Shared the folder giving read and write access to family group.
chris seems to work ok but when gretchen access it from her snow leopard laptop she can't create a new folder. It should be noted that chris is also the admin account.
I set up a Ubuntu Server for my home network to share among Win XP and Ubuntumachines.Initially everything worked fine with all Win XP machines being able to share files on the server; however, after I installed and setup SSH between my Ubuntu machines and my Ubuntu Server I now cannot share and/or even see my Server directory from Win XP or Ubuntu machines through the Samba.I have tried for 2 days to figure out the problem without success.Did I break something while setting up the SSH? How can I fix Samba?Here's some things I have setup or tried so far:1. Samba users are setup and were working previously.2. Samba share drives were setup and working previously.3. I can see the Server using SSH or SFTP from my Ubuntu machines.4. I have gone over the Samba config file numerous times5. I am administering Samba on the server via the terminal and Webmin
View 9 Replies View RelatedIM completly new to fedora but decided to give it a try after using ubuntu for a while,I have everything setup apart from sharing and im been fiddling for a while now.
View 1 Replies View RelatedIts an absolute failure for me. No matter how i try, i cannot see my samba-shared folders in a Fedora machine from another Fedora machine. Both has FC15 installed, networked through WiFi. Tried everything from this forum, (install samba, start samba service, configure samba) but cannot see my shared folder. In Windows it works fine (I can see my WIndows shares from a Fedora laptop, but i cannot see my Fedora shares from a Feroda laptop. Why it is always so difficult to have a simple facility in Linux?
View 4 Replies View RelatedI installed Fedora 15 5 days ago after using debian-based distros for a few years, and until now I've had the habit of sharing many files (mostly multimedia) on my home network, except since I'm the only one using Linux, I have to do it using Samba.In Ubuntu, Xubuntu and Linux Mint, this worked like a charm.
Two things have changed this week: I switched to Fedora 15 like I said before, and I bought a new USB external HDD. I previously used a 500 GB Western Digital, and changed for a 1.5 TB SAMSUNG which is linked to my station via USB. The drive works well and I cp'd the 450 gigs of the ancient drive within the new one without a problem.
Ever since I managed to set up fedora and GNOME 3 as I would like it, I've been trying to setup the network sharing via Samba, and that's a genuine 4-day long headache now.Thing is, yesterday, it worked. After setting everything right, creating an automount of the external HDD in a maybe-too-much permissive folder, allowing Samba through the firewall, getting to know that buddy called SELinux I had never met before and which I struggled to tame ; after setting everything up, it worked seamlessly, I streamed music from the Windows PCs of my network and began watching a film.
Except I had a problem which had nothing to do with Linux: letting the USB drive plugged in on startup prevented the BIOS phase from going well, and my station was stuck on my motherboard splashscreen. To fix this, I had to disable the USB Legacy in my BIOS. Did the trick. Yesterday night, I rebooted like that, and everything was fine.This morning, Fedora wouldn't boot. Since the new BIOS parameters didn't switch the drive on on startup, fstab was trying to mount a drive which wasn't there, and thus crashed, switching to emergency mode.Had to remove the ftsab line concerning the USB drive for Fedora to boot again.
Alrite, that's fixed, I thought ; I just changed the fstab options adding noauto,user, etc. and I thought it would be ok, but it ain't.It's now been 3 hours without me finding any clue as to how to get this working.
IMO, the problem comes from the fact that Samba is missing the right to access the drive. Samba seems to be OK: from the Windows station I can see my Linux station on the network map, I can access it entering the Smbuser I created for this, and the "ext-hdd" dir is present (that's the alias I used in the Samba config files), but when I try to access it, Windows says it can't access it.
I'll try to add as many pieces of information as possible that might be useful:
SELinux config:
Code:
[norfen@norfens-station ~]$ getsebool -a | grep samba
samba_create_home_dirs --> on
samba_domain_controller --> on
samba_enable_home_dirs --> off
code....
i am able to set up samba server with adc it is working properly. also i set the GID and stikki bit permission in sharing so i can set only crater can delete the files. But i want some users have ability to delete permission for all files and folders in that sharing
I am not able to set that
Im using WPA with a TKIP pre-shared key...Can a client pc im sharing my key with access my files if im not file sharing? Router config?
View 2 Replies View RelatedI am new to debian. How to configure debian 5 on file sharing on windows client.
View 10 Replies View RelatedSuppose I have installed a Ubuntu (UNR9.10) PC in my home LAN,-> am I right that I need to have Samba server installed before I can share folders & files (mainly large media files) in the harddisk of Ubuntu PC for read/write access by other LAN PC running WinXP?
-> am I right that Ubuntu PC cannot access (read or write) USB harddisk nor USB thumbdrive as formatted by WinXP? how about SD card through USB card reader? does UNR v9.10 contain Samba or do I need to install it separately after UNR installation? where can I find the instruction for installation and configuration of the samba server?
I'm using [URL] to help set up my server for windows file sharing. I accedently pressed unix file sharing and now i can switch it to windows file sharing.it would be fine to uninstall the Unix file sharing and replace it with the windows counterpart.I have Ubuntu desktop 10.04 (because i keep getting an error with the kernel with the server editions)
View 1 Replies View RelatedI am trying to setup samba to allow file sharing to: /home/kris & /var/www
I am trying the command smb://192.168.*.* from my MacBook & \192.168.*.* but when I enter "kris" & password: "******" it keep's on coming up "Incorrect Username &/or Password"
Here is my conf file:
Code:
[global]
workgroup = homegroup ;put your own workgroup name here
netbios name = intranet ; this should be your own too
server string = Intranet in Kris' Room.
; hosts allow = 192.168.1
[Code].....
I have two machines on the same network. I want to share files from my Red Hat server to my Fedora 11 box. I want to know what is the easiest, most secure way of doing so. My machines are on a public wire (not an issue really as I don't have sensitive stuff on there), however I'd like to learn how to secure the server, but yet still get access from my Fedora box. Anyone provide me with a guide or help on which protocol (SSH, Samba? NFS) to use?
View 3 Replies View RelatedSo, I have 2 computers both running fedora 12. I have installed NFS, all of the nfs utilities, and the system-config-nfs thing. I have unblocked the ports in the firewall. I am certain that NFS is running (or at least that when I nmap myself, an nfs port is open).However, when I go into nautilus and go to network, it shows windows network, but no other computers.If I run nmap on localhost, or on my OWN IP, it shows that it's up. and NFS is up. but when I NMap the other computer, it's hidden and blocking ping probes (though using nmap -PN will penetrate that mask, and show that it too has NFS open.)
So, how can I get these two computers to recognize each other? or am I doing this whole thing all wrong? I'm just trying to set up file sharing.
I have fedora12 on two pc's, i want to share some files between them which i was not able to do with nfs, so let me know the whole procedure to do that n also let me know where my shared files will be visible
View 10 Replies View RelatedMy wife and I activated the 'Personal File Sharing' on our two Fedora #9 laptops. We can exchange photos and text files via our "public" folders, just fine. Entire setup took less than 20 minutes. We have not been able to get the Fedora #14 version of 'Personal File Sharing' to work using same, online and 'in system', help directions for both the F#9 and F#14. After four eves of looking I have not found any more detailed, install/activate help files anywhere. I can't ask my system manager because that's us. At this point the only thing I can think of is that there may be some part of the F#14 security structure that needs to be addressed and tweaked.
View 3 Replies View RelatedI just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
View 6 Replies View RelatedIs there a way to share files over a VPN with a Dropbox type download system? I want the files to be able to update to a local file on the clients when updated on the server.
View 5 Replies View RelatedI had set up my new install with Fedora 13 and It just flat worked out of the box for file sharing and printer sharing.. but ala there were enough other issues with 13 that I have now installed Fedora 12 but I can't seem to get the file and printer sharing going I followed these instructions [URL] and instead of "WORKGROUP" I used "Brandergroup" since that is the name of the local net...
[Code]...
I want to connect my newly created Gentoo DAW to a Fedora 12 PC, for file sharing and Internet purposes. The Fedora PC has 2 NICs, where one of them is connected to the apartment's Router. The Gentoo PC has 1 NIC. I am using a crossover Ethernet cable for connecting them. [UPDATE] I changed to crossover cable, now my two machines are able to ping each other! Here's the IPs:
PC1(Gentoo): 192.168.1.2
PC2(Fedora): 192.168.1.3 --- PC2(Fedora) to Router IP: 192.168.0.10
Router's IP: 192.168.0.1
All I need now is for PC1 to enter the internet... How do I proceed from this point?
I install Fedora 11 for file sharing from windows client Win 95/98, Win xp & xp home. I can login from win xp & xp home to access folder but I can't login from win 95/98 to access folder. I got the error message... "The domain password supplied is not correct or access to your logon has been denied". from win 95/98 Desktop computers.
The following are contents of smb.conf
I have a Lucid server with several external (eSATA) NTFS formatted drives. Right now, I'm sharing everything through Samba and administered through Webmin. Partly because I'd like to play with it and learn more and partly to see if there's any appreciable difference in overhead and speed, I'd like to try out NFS.
My question is, can the two sharing schemes (NFS and Samba) coexist on the same box peacefully?If not, I can rid of Samba and go with NFS, but I'd rather give it a shot first.Plus, some of the clients are Windows machines, so I'd have to install the SFU tools in order to get an NFS client on them.
I recently installed ubuntu on one of my computers and am trying to get all my sharing worked out so I can access stuff with my windows machine. I'm still very stupid when it comes to linux.
Setting up sharing with Samba, I got my /home/user/media folder to share just fine. However I made a folder located on my second drive that I would like to share.
I have this entry for it in my smb.conf
Code:
[80GBshare]
comment = /media/Sifl_80GB/Shared/ folder share
path = /media/Sifl_80GB/Shared
[Code].....
the second drive is mounted on /media/Sifl_80GB and it was formatted as ext4.
My windows machines see the 80GBshare entry but I get the error "network path not found" when I try to open the folder. Does this mount need to be listed in my fstab for this to work correctly? I'm noticing something in the comments of the smb.conf for auto-mounting a cdrom drive when a cdrom drive is accessed by adding a fstab entry, so I'm wondering if this needs to be done with my second drive?
I set up a samba file sharing system but my workgroup asks for a username and password see this-This is the text in /etc/samba/smb.conf:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
[code]...
I have a wired lan at home with 2 XP boxes connecting to a router to a DSL modem. I want to network my laptop, running only fedora os, for file sharing, printing and internet access. I will be using the laptop probably exclusively for creating/maintaining a Drupal-based (LAMP) e-commerce site to replace our old one for our small family business.
View 4 Replies View Relatedmy main computer hostname is home, and the others are ubuntu and eduardo.In home, I try to configure samba, downloading it with "sudo apt-get install samba" and then downloading at the synaptic manager the samba-common-bin thing.I shared my folders as ROOT in home and I cannot access from ubuntu and eduardo.Then I googled and I found this site: Quote:URL]Well... I follow all steps and I can't access these files.What I need to do to share files between these computers???
View 9 Replies View RelatedI have a parallel printer working on a desktop. I want to share it with my laptop, but I don't want to have to use samba. Both have ubuntu 10.04 installed.
I'm sure it can be done, but I'll be darned if I can find anything in the skimpy admin. tools.