Debian Configuration :: Re - Size A Drive But After A Message Of Successful Resizing, Nothing Changes?
Jul 24, 2011
I am trying to re size a drive but after a message of successful resizing, nothing changes !
This is original size
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/k9-root 322M 253M 53M 83% /
tmpfs 2.0G 0 2.0G 0% /lib/init/rw
udev 2.0G 204K 2.0G 1% /dev
tmpfs 2.0G 1.0M 2.0G 1% /dev/shm
/dev/sda1 228M 15M 201M 7% /boot
[Code]...
View 6 Replies
ADVERTISEMENT
Feb 27, 2016
I have Debian and Virtual Box with another Debian. I have resized max size of vdi file with VBoxManage modifyhd but now I need to resize partition on virtual machine's system. I've downloaded GParted and I can run machine from this ISO as CD. Partition is encrypted on machine.Unfortunately GParted doesn't start with X so I have to use it in terminal. I can see partitions:
Code: Select allroot@debian:/# fdisk -l
Disk /dev/sda: 80 GiB, 85899345920 bytes, 167772610 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3914....
[code]....
So I though maybe I need to use this (URL...). I couldn't find similar tutorial about Debian or GParted but OK, it's just executing these commands, not modifying its source.list.But I cannot even do the update:
Code: Select allroot@debian:/# sudo apt-get update
Err: http://free.nchc.org.tw/debian sid InRelease
 Temporary failure resolving 'free.nchc.org.tw'
Err2: http://free.nchc.org.tw/drbl-core drbl InRelease
 Temporary failure resolving 'free.nchc.org.tw'
Reading package lists... Done
W: Failed to fetch http://free.nchc.org.tw/debian/dists/sid/InRelease Teporary failure resolving 'free.nchc.org.tw'
W: Failed to fetch http://free.nchc.org.tw/drbl-core/dists/drbl/InRelease Temporary failure resolving 'free.nchc.org.tw'
W: Some index files failed to download. They have been ignored, or old ones used instead.
So I check my internet connection. VirtualBox has 'attached to NAT' and before I run out of space on virtual machine, Debian could access internet. So it's only something about this GParted. I have modified /etc/resolv.conf with vi (even vim is not available). And it has two valid nameservers. I haven't restarted anything, as I'm not sure if I need to, after modifying resolv.conf file.But even in that case I cannot ping anything from GParted:
Code: Select allroot@debian:/# ping www.google.com
ping: unknown host www.google.com
How can I access internet from GParted and resize encrypted partition?
View 8 Replies
View Related
Apr 4, 2011
When I installed Debian on this machine, I went with guided partitioning, encrypted lvm, and Debian defaulted to a 10GB / partition. I figured, hey, defaults are there for a reason, so left it alone.
Now that I need to shrink my /home and extend /, I'd like to do so as easily as possible. I installed system-config-lvm, read its man page ( which is really just a long description of the program, not much instruction ) and fired it up. Won't let me resize ( shrink ) /home, said files are in use.
Is there a way to use the nice pretty graphical tool, or do I need to boot to a non-X-using runlevel and log in as root, then muck about with CLI tools like lvresize and resize2fs?
View 2 Replies
View Related
Jan 23, 2016
Is there a way where I can take like 50GB from my home folder (I have 375 avail., but using only 22GB) and put it to the root partition? Twice now my system has almost ran out of space on root, so luckly I was able to clear out old stuff so I don't have login issues after finding the hardway the first round lol. I just want to make sure I can login with out being forced back out because root don't have space to let me login.
View 11 Replies
View Related
Sep 12, 2015
I just bought a new HP desktop, and I want to install Debian on the hard drive. I ran the Windows program on the Debian CD to start the install.
I selected Manual drive setting, and resized the large C: partition to 50 GB. I want to install Debian in some of the free space, only their isn''t any free space! The 400+ GB I took out of the C: partition is labeled "unusable" instead of "free space."
If I double click the unusable space, I am just given the cylinder/head/sector numbers. How I can make that space usable?
I would boot my Gparted CD, but I don't know how to get to the BIOS. The boot screen goes right to Windows without showing me the key to get to the BIOS. I tried hitting DEL, but to no effect. Do you know what the HP computers use to interrupt the boot?
View 4 Replies
View Related
Oct 8, 2010
Mis-allocated 10g instead of 30g to /var/lib/mysql and realized mistake After Fresh Install and upgraded all servers. Using Slackware13.1, Xfce did some googling wondering if its possible to resize the above partition with fdisk. Read some things about gparted and wonder if it will work using Xfce.. i've never use kde or gnome. There is also mention of using live cd; I have no experience with any of the mentioned tools; just fdisk to partition and install. What is the best or simplest way to backup & restore; (I do have an empty sdb 160g but don't want to get into complicated raid or LVM setups right now because I still have to learn howto backup & restore do data to the point where I feel comfortable with it)?
Current setup: sda 160gb Hdd used 73.5 for following partitions: sda1 512m /boot; sda2 Extended Rest of Hdd; sda5 1280m /swap; sda6 8g /home; sda7 2g /; sda8 8g /usr; sda9 8g /usr/local; sda10 10g /var; sda11 10g /var/log; *sda12 10g instead of 30g /var/lib/mysql; sda13 10g /opt; sda14 5g /tmp Haven't configure mysql... so /dev/sda12 is empty except for system disk data the same goes for /dev/sda13 /opt & /dev/sda14 /tmp
View 14 Replies
View Related
May 19, 2010
I recently decided to install Ubuntu on a couple of computers without CD drives (netbooks), so I followed these instructions to create a bootable flash drive: http:[url].....That worked fine for both netbooks. Now I'm trying to use the same flash drive on a desktop currently running Windows Vista, but get his message when I try to boot from the flash drive:
No DEFAULT or UI configuration directive found!I tried to boot one of the netbooks from the flash drive again and that still works.I'm thinking a BIOS setting.
View 9 Replies
View Related
Jan 11, 2010
I removed an ntfs partition I had in my HD and then resized my home partition with gparted to occupy all the available space. The resulting partition is supposed to be 129GB, and gparted/partition magic see that size. But the system does not, and all tools report the old partition size and the same free space I had before resizing.
View 5 Replies
View Related
Apr 3, 2011
I have been trying to install programs and I keep getting a screen error message. and it does it on every package i install unless i remove screen.
[code]...
View 3 Replies
View Related
Mar 14, 2011
I have successfully configured my system for a multi-seat setup using 2 nvidia cards in Linux Mint 10 and it works great except for a few things that I can't seem to get to work.
1: I can't access any other drives other than the file system drive. All usb flash drives and even esata external hard drives. When I try to mount, it gives me an error: Unable to Mount <drive>, Not Authorized.
2: If not logged into for a while, the second seat (the one on my tv) seems to "go away". I just get no signal on my tv. I have a hunch that this might be the power saver options turning off the display. I think it does it after an hour or so. [EDIT]: just tried to move the mouse and click the keyboard on the no signal screen, it worked!
View 1 Replies
View Related
Jan 21, 2016
After adding the backports from 8/Jessie to a 7/Wheezy sources.list and running aptitude update, I get these odd error messages. What is going on?
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python-cffi-backend-api-min
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-max
W: Ignoring Provides line with DepCompareOp for package python3-cffi-backend-api-min
W: You may want to run apt-get update to correct these problems
View 3 Replies
View Related
Mar 13, 2010
I just expanded my raid 5 array from 3*2TB to 4*2TB and mdadm made the grow successfully and shows an md0 dev with the size of 6TB usable data. Now my problem is that Debian (Lenny) dosn´t show the right amount. See below
######### MDADM DETAILS OF ARRAY ##########
> mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Mon Dec 14 22:30:46 2009
Raid Level : raid5
[Code].....
View 3 Replies
View Related
Mar 17, 2011
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies
View Related
Sep 3, 2015
I installed few days ago Debian Jessie (Linux server-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux) for some tests.I tried to install iptables-persistent with the command "apt-get install iptables-persistent".During the install process, I got the following message :
Code: Select allPreconfiguring packages ...
Selecting previously unselected package netfilter-persistent.
(Reading database ... 31677 files and directories currently installed.)
Preparing to unpack .../netfilter-persistent_1.0.3_all.deb ...
Unpacking netfilter-persistent (1.0.3) ...
Selecting previously unselected package iptables-persistent.
[code]....
Some talks about cups, acpid, ipv6 or systemd but nothing has solved the issue in my case.I used iptables-persistent many times with older debian versions.
View 6 Replies
View Related
Apr 30, 2016
I installed Debian 8 Jessie with full disk encryption and chose to have everything on the same partition. After install, I notice that my 8GB laptop has a 16GB swap. Is there a way to reduce the swap to 8GB (or maybe 4) whilst not affecting the encryption?
I have a 1TB HDD so space is not an issue but I dislike such waste. The setup used LVM.
View 2 Replies
View Related
Sep 26, 2015
After install debian 8, I can't see system start and stop message from console ... How can I enable system message from console in debain 8?
debian 7 output
----------------------------------------------
root@demo:~# service apache2 restart
[ ok ] Restarting web server: apache2 ... waiting .
root@demo:~#
debian 8 output
-----------------------------------------------
root@demo:~# service apache2 restart
root@demo:~# <=============================== No message (start or stop)
View 0 Replies
View Related
May 17, 2010
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
View 2 Replies
View Related
May 17, 2011
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
View 6 Replies
View Related
Apr 17, 2016
I update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:
Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table
I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.
And also something appears to have happened to the raid device since the update.
Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.
mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0
I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.
View 0 Replies
View Related
May 4, 2010
my iwlist scan is normal. ethernet connection ok, wirless not working but does seem to receive. wifi radar lists my router ssid. Does this say I have the correct router for my wireless is my question? I am also getting this error message with this system on KDE, LENNY. From KWLAN a wpasupplicant front end.
"you do not have permissions to start pppd or pppd was not found. Dial up networking will not work."
[code]...
View 2 Replies
View Related
Mar 17, 2010
I just installed Debian onto a PowerPC G4 Tower with two hard drives. I left OS X on one of the drives and reformatted and installed Debian on the other, using the installer from the 60Mb ISO from the Debian website.
The installation had no issues and it starts yaboot and Debian no problem.
After about 2 minutes of the booting up process, it starts to output this, every five seconds:
While this happens, other things still continue load and it outputs occasional messages and even gets to "Debian Login:" where if you type really quickly and hit enter, it takes it and prompts for "Password:" right after the next round of the above messages.
I have not been able to completely log in yet.
I can start up into the shell as root with "Linux single" with no problems.
I think this might have something to do with the second Mac OS Formatted Hard drive. I have considered unplugging that drive and testing it that way, but I am looking for a solution to turn off whatever script is running that every five seconds and failing, regardless of what it is trying to do.
View 9 Replies
View Related
Jul 1, 2010
I have an external 1tb usb drive. It has 1 partition which is in the XFS format. I want to resize the drive to make it smaller, but I cant seem to find a way to do it without losing my data, I have tried using Gparted but the resize option is always greyed out and im not sure how else to go about it.
View 2 Replies
View Related
Apr 21, 2010
I have this rather old Compaq Presario 2184 (Celeron processor), with a completely busted optical drive - which means I cant boot from Live CD, and it doesn't boot from USB, either... which means I cant use a live memory stick, either. It's currently running Xubuntu 9.04.
I'm seriously running short of space on my root partition - can't upgrade to 9.10...
I had a Windoze partiion that I decided to remove, using Gparted. Identified the NTFS partition, right click, delete. After that, I couldn't do anything else... I then found this page, that told me that I cant resize all partitions while booting from hard drive, and that I needed a Live CD. For the reasons mentioned above, that's just not possible...
Are there any alternatives that the good folks here can suggest? For example, can I create a new partition, and move my entire /usr there? It would solve the space problem, but I'm not confident of doing it without screwing up something... could someone kindly guide me through the process?
View 8 Replies
View Related
Oct 28, 2010
maybe this is something extremely simple and my brains are just mush after a whole night of struggling (and succeeding) with wifi driver issues.i'm running a brand new 10.10 netbook on a brand new asus eee 1015. i am trying to set up my email in evolution and the evolution windows are larger than the netbook screen, which means that the OK, SAVE, etc buttons are outside reach. i tried to resize, move window - resizing doesn't work and it only moves horisontally, not vertically.
View 9 Replies
View Related
Jan 14, 2010
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
/dev/sda1 is XP; /dev/sda2 is Linux Mint
View 4 Replies
View Related
Jun 28, 2010
I'm a bit new to LVM administration, and I have a question that the Clonezilla Live forum referred here. Below is the question.
2010-06-24 07:10:00 UTC
So, I was moving from a 250G disk to a 320G disk because I was running out of space on my laptop. My problem is that my new drive seems convinced that it is only 250G in size, and I'm wondering how to persuade it otherwise. I'm not sure if it matters, but I did use the -k1 option when Clonezilla was restoring in order to resize the partitions proportionally. Here is the output of fdisk -l and pvdisplay:
root@nansen: [/]$ fdisk -l
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 17 133610 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 17 38911 312412851+ 8e Linux LVM
So fdisk knows that the drive is 320Gb, and the sda2 partition is about 319Gb in size. But LVM isn't buying it:
root@nansen: [/]$ pvdisplay
--- Physical volume ---
PV Name /dev/sda2
VG Name VolGroup00
PV Size 232.78 GB / not usable 2.71 MB
Allocatable yes
PE Size (KByte) 32768
Total PE 7449
Free PE 1
Allocated PE 7448
PV UUID RKhtpa-J34H-GnvD-26v3-bAEI-wccm-f55hwS
Is there some sort of pvchange command that I need to run? Here is some more info in case you need it.
root@nansen: [/]$ pvs
PV VG Fmt Attr PSize PFree
/dev/sda2 VolGroup00 lvm2 a- 232.78G 32.00M
root@nansen: [/]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00 225G 209G 4.5G 98% /
/dev/sda1 127M 12M 108M 10% /boot
tmpfs 125M 0 125M 0% /dev/shm
steven_shiau (Clonezilla Live moderator)
2010-06-24 14:03:48 UTC
Option "-k1" is only for partition size, it won't deal with LVM yet. I think you need other tool to resize the LVM.
View 1 Replies
View Related
Jun 9, 2011
I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.
View 14 Replies
View Related
Feb 2, 2010
I'm running Debian Sid amd64 on a Vostro 1320. Both hibernate and suspend works fine using the kernel hooks, but after the system resumes from hibernation, it starts to get really sluggish. Iceweasel hits 100% CPU use, and I have to close it and open it again to get it working, and generally the system is just must slower than before the hibernation. I have to reboot to get performance back, and even doing swapoff and swapon does not solve the problem.
View 4 Replies
View Related
Feb 14, 2011
I tried four cdrs and I can't get my dvd rom or dvd-rw to list the contents even though k3b says it was successful. If I open k3b it see the cdr and say sessions 1 appendable yes. I burned the cdr as multisession. I can only view the contents of the cdr by doing a continue multisession while in k3b. I'm using squeeze and kde.
View 4 Replies
View Related
Apr 28, 2011
How do you access preferences for changing size of the launcher bar or icon size, etc? I looked through system settings and could not find it.
View 4 Replies
View Related
