Ubuntu :: Resizing Partitions Without An Optical Drive?
Apr 21, 2010
I have this rather old Compaq Presario 2184 (Celeron processor), with a completely busted optical drive - which means I cant boot from Live CD, and it doesn't boot from USB, either... which means I cant use a live memory stick, either. It's currently running Xubuntu 9.04.
I'm seriously running short of space on my root partition - can't upgrade to 9.10...
I had a Windoze partiion that I decided to remove, using Gparted. Identified the NTFS partition, right click, delete. After that, I couldn't do anything else... I then found this page, that told me that I cant resize all partitions while booting from hard drive, and that I needed a Live CD. For the reasons mentioned above, that's just not possible...
Are there any alternatives that the good folks here can suggest? For example, can I create a new partition, and move my entire /usr there? It would solve the space problem, but I'm not confident of doing it without screwing up something... could someone kindly guide me through the process?
View 8 Replies
ADVERTISEMENT
May 22, 2010
I dont know when k3b stopped working but have just gone to burn a disk and when opening it tells me
Quote: No optical drive found. K3b did not find any optical device in your system. Solution: Make sure HAL daemon is running, it is used by K3b for finding devices.
I can boot from cd and can mount cds from within Slackware but for some reason k3b insists that i don't have a drive.
View 8 Replies
View Related
Apr 10, 2010
is this possible ? I have 3 partitions 2 different Linuxes on of which Ubuntu and one MS Windows. One of the partitions has come too small. Can I resize all in safe way when plenty of empty space on one partition ?
View 6 Replies
View Related
Nov 7, 2010
I've been running lucid lynx on my inspiron 6000 for a couple of months now, and have become very comfortable with it. I would really like to eliminate xp, but I own a zune, and cannot do anything with it in linux. So xp must stay .
Anyway, my hdd is a paltry 60GB, and when I first set it up I gave xp 40GB, 513MB to swap, and the remainder was given to linux. Now I would like to expand the linux partition and shrink the xp partition, and am looking for the safest way to do it without reinstalling either os.
ps. xp is ready to go (defraged and all that), and I have some partitioning software in xp, but don't think its a good idea to resize linux's partition in winblows.
View 3 Replies
View Related
Jan 27, 2011
What I want to do is enlarge both my root partition by about 10 GB and also enlarge my Home partition by about 45 GB. I realize there is enough space in the root partition for expansion (see screen shot) but I want to be certain (some of the last updates have been over 100 MB). I have a dual boot 10.10 64 bit system with XP . There are two drives ; a 1 TB drive with Windows, Ubuntu and a NTFS data partition and a 2 TB drive for media which won't be touched by this operation. I have taken about 58 GB from my Windows partition and this now sits unallocated and ready to be used to expand the Ubuntu partitions. expanding these partitions (root and home) would be appreciated. I read bodhi.zazen' excellent tutorial on partitioning [URL] but I still am unsure how to go about this. I have a live Meerkat CD.
View 9 Replies
View Related
Aug 17, 2011
I am currently using Ubuntu 10.10 on my laptop. I saw Fedora had the new Gnome3, so I decided I might like to try that, My hard drive is about 230GB. Ubuntu currently has all of it, and I would like to make a small partition for Fedora. I know that during the Fedora install you can resize the current Ubuntu partition manually, very simple, gives you the size in MB, and you just shrink it, and Fedora takes up the remaining amount of space.
My actual question here, is how would I, if I should like Fedora 15 more than I thought I would, proceed to shrink the Ubuntu partition more, and increase the one for Fedora?
Ubuntu would have 200GB. Fedora would have 30GB. How do I go from this point, to having Ubuntu use 180GB, and Fedora having 60GB?
I realize there are lots and lots of guides already on the Ubuntu website for help with partitioning etc, but they all seem to be about first time install, or for doing so with windows. All I would like to do is use something like gparted to resize the Ubuntu partitions and expand the Fedora one.
View 1 Replies
View Related
Mar 22, 2011
I made quite a bit of partitions of different Linux distributions in an attempt to compile a massive program. (To those who do a bit of weather research, I'm trying to compile both WRF and WPS on 64 bit Linux.) I finally compiled the program on 64 bit Fedora 14, and now I'm running out of space on this partition. Is there a way to increase the size of a partition without uninstalling the current OS? I don't mind what happens to the other partitions, but I put quite a bit of effort in this current one. Also, the program demands that all of the data be contained in the same home directory, so I can't keep files in other partitions.
View 5 Replies
View Related
Nov 18, 2010
resizing partitions with gparted
tools for resizing linux partitions under RHEL 5.5. ALSO what precaution we can take before resizing the partitions.
View 1 Replies
View Related
Apr 15, 2010
I have a dual boot system 9.10 and XP. The hard drive is 234. For some reason during the install I only allocated 128 to windows and 16 to ubuntu. Or at least, gparted tells me I have 127.99 NTFS and 104 unallocated (=231G ??).
System monitor tells me I have the following:
/dev/loop0 is ext4 = 16 G total
/dec/sda1 is host = 128 G total
this is 134G total
From windows, the partitioner tells me the same. I have 104 of unallocated disk space and 128 of NTFS. I assume the 16G allocated to ubuntu is inside the 128G?. How do I get that additional 104 into ubuntu without screwing up the MFT of windows. Or can I? Is it as simple as telling gparted to format the space? or will that mess windows up?
View 2 Replies
View Related
May 7, 2010
I want to resize and eventually remove some partitions on my drive but I need to know how this will affect grub and what to do if I need to fix it.I currently have 3 standard partitions and 1 extended partition on a 160Gb drive.
1st Partition -Windows XP about 60Gb with about 35Gb used. NTFS
2nd Partition -Ubuntu Lucid 10.04 amd64 about 40Gb, 22Gb used ext4
3rd Partition -Linux swap about 2.5Gb
Extented Partition -Ubuntu 9.10 about 49Gb with 23Gb used ext4
I'd like to shrink the Extended partition down and add the space to the 2nd partion where Lucid is. Eventually, I'll want to delete the whole extended partition and add all the space to the Lucid partition.
After using GParted to resize these partitions, what will happen when I boot? Will I need to tell grub where the swap and 9.10 are? I am not changing the start of the first two partitions so I would assume there will not be any problem with them (I'm not sure how moving the start of the swap might affect the Lucid installation though).
View 9 Replies
View Related
Aug 29, 2010
I have 1 HD with the following OSes, each on his own partition:
p1 WinXP
p2 Win7
p3 Ubuntu
p4 Ubuntu Studio
p5 Unallocated (not actually a partition)
I intended to create a 5th partition, formatted as NTFS, for data. That's when I found out that Windows only supports 4 partitions per disk (yeah, I know, should've looked it up first). On Win7 Disk Management applet, they're all listed as "Primary Partition".
I've come up with a few possible solutions: s1. Move partitions p3 & p4 down towards the end of the HD, and add half of the available space to partition p2 (Win7) and the other half to partition p4 (Ubuntu Studio).
s2. Move partitions p3 & p4 to the end of the HD, and add all available space to partition p2 (Win7).
s3. Increase partition p4 (Ubuntu Studio) to take up all the available space.
My questions:
q1. Win7 Disk Management applet gives me no option to move or resize (other than shrink) the partitions. Does this mean I'll have to use another partition manager (e.g., gparted)?
q2. If I move the partitions p3 & p4 (both Ubuntu), will there be any impact on grub?
q3. Is there any way to turn partition p4 to extended instead of primary? If so, what are the consequences?
View 6 Replies
View Related
Oct 22, 2009
I have software RAID 1 on two physical discs. There are now 4 md -partitions (md0 ... md3), which are used in such as / and /home among others. Now current size of /home (md3) is starting to be full, and since / (md1) has more than plenty of free space I decided to fix the situation by shrinking / (md1) partition to free 40 Gigs of space and then growing /home (md3) partition for that 40 Gigs.
I already checked for some info using mdadm and got the following:
Now I would need some support on HOW exactly should I do this resizing since it is on RAID partitions.
Would it be good to use resize2fs to modify the filesystem sizes and mdadm to configure the partition sizes. Or could I perhaps get over this even easier by using GPartED (in case it supports my RAID)? Has anyone here done similar resizing on software RAID1 partitions?
View 11 Replies
View Related
Nov 9, 2009
I had installed CentOs 5.3 on a Virtual Box machine (v. 3.0.10) and then I needed more free space to upgrade to CentOS 5.4 on partition /. I wanted to substract some space from /home partition in order to add some more free space to /. Thus I used a gparted live cd (v. 0.4.8-1) that it is a debian live cd. I resized the partition as I wished and every operations went successfully, but when I tried to reboot the only message that I see its 'GRUB' and nothing else happen. If I start again with the gparted live cd, everything seens to be fine as the partitions are there but I can't boot the system.
View 3 Replies
View Related
Jan 23, 2016
Is there a way where I can take like 50GB from my home folder (I have 375 avail., but using only 22GB) and put it to the root partition? Twice now my system has almost ran out of space on root, so luckly I was able to clear out old stuff so I don't have login issues after finding the hardway the first round lol. I just want to make sure I can login with out being forced back out because root don't have space to let me login.
View 11 Replies
View Related
May 24, 2010
I resized all of my partitions using GParted, I got Windows 7 and Vista to boot up again ok but I can't get F11 to boot. I am not using GRUB nor do I want to, I tried using the install disks and doing a repair and "chroot"-ed my filesystem and everything is still there, there is just something small missing that I am not remembering to do. I have the NST files on my Windows drives and it tries to boot but F11 complains that there is no boot disk. I'll try to boot once again and write down the exact error message.
View 12 Replies
View Related
Apr 13, 2011
I have a Huawei IDEOS S7 android tablet running 2.1.My USB port has died, so I need to delete a partition I put on the internal memory area, then resize the remaining partition back to the full amount. It looks like I should be able to use terminal emulator to do that, but I don't know any of the commands.
View 2 Replies
View Related
Apr 15, 2011
Is there any dvd drive with longevity? The boxes in this "normal" house have had 100% failures on dvd writers and readers in recent years. I'm an electronics guy and know why this happens - minute changes in the careful balance on the reading head, not helped by the facts that:
1. low grade adjustable resistors are often used
2. The range of adjustment is far too great, making it impossible to retain a stable preset value.
3. Optical diodes lose forward voltage drop over time. If they start at, e.g. 1.2V after some months or years the forward voltage will be down to 1.0V. This changes the current, hence the brightness.
View 14 Replies
View Related
Jun 8, 2010
So if I boot without a DVD or CD in my optical drive, then I attempt to put one it, it doesn't mount. I try mounting with the terminal and that fails as well. If I boot with the media in the optical drive, it works fine. (this problem occurs both on my desktop and laptop and I know the DVD and CD's work in both 9.10 and in windows, This error also occurs with Linux Mint and Sabayon leading me to believe this is a kernel issue).
[Code]...
What do I need to do to get this to work like it should? I have been asking about this since the beta of 10.04
View 1 Replies
View Related
Jun 7, 2010
In my laptop, the optical drive cannot burn dvds. If I get an external usb optical drive do I have to initialize it and how? Also do I have to install some particular packages?
View 4 Replies
View Related
Mar 9, 2010
I have a pc with linux mint installed, and wanted to try edubuntu with my kids. The first time we tried, it booted just fine from the dvd, as the bios is already set to boot from dvd as priority. So it ran off of RAM.
Subsequent tries however, result in the pc booting mint from the hdd, and no sign of edubuntu at all. I have tried different distros/isos, but to no avail. I have also opened the box to see if the dvd drive had somehow come unplugged.
View 3 Replies
View Related
Mar 24, 2010
My cdrom was sort of working, but the tray was physically damaged. The usb was working without a problem.
After replacing the the cdrom drive with a similar model known to work well I could not get it to mount. I then tried to move important files to usb to try a fresh install. The usb stick flickered when I put it in, but it didn't mount. Same behaviour as the cdrom, the light goes on when I turn on the computer, but once I'm logged in I can't access the cdrom.
I have tried multiple variations of playing with fstab and trying to mount things in terminal to no avail. I just can't get Ubuntu to recognize the usb or cdrom even though their lights go on when I first try to use them.
View 4 Replies
View Related
Jul 5, 2010
I currently have the following:-
Optical Out from my TV into the SPDIF / Optical In on my PC
Optical Out from my PC into my Sony 5.1 Theatre Kit
The audio from the PC comes through ok when listening to music and movies. But unfortunately I can figure out how to enable the audio passthrough from my Tv so that the audio comes out of my theatre kit. In Sound Preferences, the hardware is set to 1 Output / 1 Input [Digital Stereo (IEC95 Output + Digital Stereo (IEC95 Input]. When I click on the audio tab, the Input Volume is at 100% and the Input Level is moving in conjunction with the audio coming from the Tv.
I saw it mentioned in another thread to install Gnome Alsa Mixer which I've done, it seeems to identify the audio chipset as Realtek ALC882, the motherboard is an Abit AB9 Pro. Hopefully I'm missing some config somewhere or there a box I should be ticking but I just can't find it.
View 2 Replies
View Related
Apr 3, 2011
I tried to burn a cd today and k3b told me it couldn't find an optical device. It suggested making sure HAL was running, it is. Nothing has changed except auto upgrades, so I tried an apt-get upgrade to see if that would make a difference. It didn't. Burning has never been an issue before, and googling all day hasn't provided any answers, apart from finding /etc/init.d/hal The permissions haven't been changed.
james@Lenny:~$ ls -l /media
total 8
drwxr-x--- 2 root root 4096 Feb 12 00:14 apt
lrwxrwxrwx 1 root root 6 Jan 21 2009 cdrom -> cdrom0
drwxr-xr-x 2 root root 4096 Jan 21 2009 cdrom0
View 3 Replies
View Related
Mar 31, 2010
I have a strange problem with my DVD player. The problem: My device seems not to read any CD (it does read DVDs). Prologue: On a previous installation I had the same problem. But after messing up with that system I made a re-install, and the problem was gone. So I wasn't concerned about the problem any longer. That would be fine, but recently I had to make a new re-install to have space for windows. (I know, I'm a sinful man) But now the problem is there again. And it even is there under windows.
Question: In how far is the hardware damaged or is it a software problem since it once worked? Hardware data:
-Systems: Fedora 12 & Vista
-Laptop: Dell Studio 1555
-Drive: Optiarc Model: DVD+-RW AD-7640S Rev: HD18
What I have been doing to fix the problem:
-I made an update of the firmware and bios with the files provided by dell
-cleaned the lenses (with a clean disc)
-checked log files (both windows and linux)
After setting udev to debug logging I received this
[Code]......
View 2 Replies
View Related
Nov 2, 2010
I seem to be having a problem with burning CDs. Whenever I launch k3b, it says 'No optical drive found.' However, When I insert a CD while in KDE, it properly mounts it. What do I do? It seems like udev/hal is working fine. Also, I can't get KDE to recognize any inserted flash drive or external usb storage device inserted on demand.
View 1 Replies
View Related
May 21, 2009
Hardware is a Supermicro with C2SBC-Q board, have set up a RAID1 with 3 WD drives, the BIOS "sees" the "LightScribe" DVD drive but it is not being recognized by CentOS (5.2 x86_64). It's on an IDE bus, set to "master".# dmesg | grep -E 'CD|DVD|hdc' produces a new prompt with NO feedback, BTW.I have CentOS 5.2 i386 running on this machine with the same DVD drive, it was not an issue.
View 10 Replies
View Related
Aug 1, 2010
1- If I have a motherboard that supports USB boot (a Supermicro one), how can I put the CentOS DVD .iso that I just downloaded onto the stick to have the computer boot from it?
2- Certain Supermicro boards support IPMI (Kvm over LAN) and Serial over LAN and most notably Virtual Media Over Lan. I am wondering if there would be any problem installing CentOS using the Virtual Media over Lan.
View 8 Replies
View Related
Jan 2, 2010
My girlfriend has a dual boot netbook I set up for her with Vista + 9.10. Her internet service went down yesterday temporarily and she was messing around with the computer to get back online and somehow booted into the Windows Rescue Partition and began the Windows Restore process, then turned the computer off during the middle of the restore process.It's her only computer and she lives 1800 miles away. And since it's a netbook there's no optical drive.
When she boots up now, the netbook goes straight into Grub Rescue mode. I got her to try most of the commands for Grub Rescue, but most of them come back as "Unknown Command". The "LS" command works though, and she was able to get a list of partitions displayed.Does anyone know of some commands she could use try to boot back into 9.10 (assuming it's still there)? Or even boot into Windows? Specifically, is there a simple command that could be combined with "LS" to specify a partition and try to boot into it?
View 9 Replies
View Related
Jul 20, 2011
Sorry if this question might sound stupid I'm a complete noob here. I bought an ASUS EEE PC 901 second hand and had reformatted the hard disk with a fresh installation of Ubuntu 10.10 netbook remix. formatted the 2 drives as follows : 4 gb hard disk space ext4 , and 8 GB hard disk space ext4 This was after countless problems with Ubuntu 11.04 Desktop edition previously not being able to connect to the internet via my home wifi router. I took the advice on this forum somewhere, someone said 10.10 NBR will not have issues with wifi connectivity. Tried it and it worked. On my current Ubuntu NBR 10.10 installation, absolutely no wifi connectivity problems whatsoever.
Now my brand new MyLink portable USB Optical Drive which plays DVDs and CDs has arrived in the post. I open it, plug it into my ASUS eee pc 901. And nothing happened. I am used to using Windows and its Plug and Play function. Now for the life of me, this just doesn't happen in Ubuntu right now. The computer does recognise the drive though. Under Applications > Disk Utility I can see the optical drive right there and there's an option to use Brasero to copy and burn DVDs. However no option to play. I tried using the Movieplayer that comes installed with this Ubuntu version to play the DVD I'd insertedd into the drive, but on clicking "Add file" to try and search where on the system the DVD file is located, nothing turns up. All I can see are my home directory and the files on my hard drive.
The external optical drive came with a CD with the drivers on the CD, meant to be installed I think. But I have absolutely no idea how to install it on Ubuntu. Or if I need to install it.Can anybody help me out please? I'm starting to think maybe I should have just stuck to the Windows XP that came with this netbook. I would prefer to stick with Ubuntu though as its supposedly faster than Windows...
View 9 Replies
View Related
Apr 2, 2011
I'm trying to backup netbook files to an external optical drive. I can read discs but not write. A while back I tried using K3b but it did not see the external drive. Now it does, but tells me write access is needed and quits. I am in the cdrom group.
View 2 Replies
View Related
