I've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
when I try to install a package, I've the message The following packages have unmet dependencies:package-xy: Depends:lib-something (>= version_number) which is a virtual package.
View 14 Replies View RelatedI'm trying to set up my web server (nginx) as a catchall virtual host, as per an example that can be seen here: [URL].. (It's the Wildcard Subdomains in a Parent Folder example). Now, here's my issue. I use Wordpress on the coburndomain.org domain. I have pretty URLs enabled, that make my Wordpress articles look like this:[URL].. At the moment, nginx is reporting 500 Errors, saying that index.php is not a directory. What I want to do is make a rewrite rule that allows me to use the above URL example with nginx.
I followed this tutorial to do so: [URl].. , but I'm not sure how to apply it to my setup. Here's my configuration files from Debian Squeeze with Nginx onboard:
[Code]...
Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.
how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.
'm using Debian 6 (Squeeze) and I'm trying to migrate away from Apache to Nginx, but my Nginx installation seems to be showing some weird behavior.
aptitude install nginx-extras
/etc/init.d/apache2 STOP
/etc/init.d/nginx START
the configuration file /etc/nginx/global.conf syntax is ok [alert]: mmap(MAP_ANON|MAP_SHARED, 33554432) failed (28: No space left on device)
configuration file /etc/nginx/global.conf test failed
I have a rented vserver running at Strato [URL]. It came preinstalled with Debian 7. I upgraded it to Debian 8, what seemed to run fine, all services running. The problems came up when I tried to reboot the server to test the init system. It just does not come up, I cannot ping it, nothing. I can boot into the rescue system, mount the system partitions and chroot in to the filesystem. In this state I also can run my services, including apache2 and mysql. In the syslog I find nothing about the reboot. Now I need to reboot ino the normal system. I already tried to resume to sysvinit without success.
View 7 Replies View RelatedI'm using Debian 5 with Exim 4 on my VPS. My purpose is to make mailboxes for each virtual host on my server. What do I have: 1. Exim is set correctly - receiving mail from [URL]... is successfull. 2. Mail for [URL]... is delivered, and the mail for [URL]... too. But [URL]... is the site written to /etc/hosts (it's localhost), and [URL]... is virtual host. But mail from both boxes writes to /var/mail/mail. Now what do I need: 1. Make mail for [URL]... store in [URL].... and mail for [URL].. store in www/Maildir. 2. Make mailboxes like [URL].... to receive mail by Thunderbird. 3. Set passwords for [URL]... and [URL]... (I don't want to enter my system user/root passwords).
View 2 Replies View RelatedHow to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
I have VPS installed with Debian, NGINX, mysql, php and wordpress. By default the template gives 1 wordpress install in the /var/www/ directory. However, now I want to add more domains with wordpress to that VPS. I created a directory called /home/public_html/domain1.com and linked it to the /var/www/ directory. then I created another directory called /home/public_html/domain2.com and uploaded wordpress there. What I did next was edit my /etc/nginx/nginx.conf file with the following code:
Code:
user www-data www-data;
worker_processes 4;
events {
[code].....
I installed a new squeeze serverXen Hypervisor runs the server as Dom0 anda virtual Windows XP.The server runs samba, postfix, dovecot, squid, cups and hylafax with a Frritz ISDN card (module fcpci.ko).The used memory of Dom0 rises slowly (about 5MB /h) until the system crashes.As a workaround i installed a reboot every 24 hours.htop shows normal behavior.The system is already in production, so i can't stop services to track this bug.I need some hints how to debug the running system to find out, where the memory gets lots.
View 3 Replies View RelatedI have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.
I have tried the following simulation command, but it gives the error message shown:
Code: Select all~# apt-get --simulate -t stretch install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources
The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:
/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf
What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.
Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?
View 9 Replies View RelatedI am running Jessie 8.2, upgraded from Wheezy about a week ago.
KDE Desktop, static IP
NetworkManager.conf shows:
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=true
dns=none
The dns=none is to keep NetworkManager from overwriting /etc/resolv.conf (which shows):
nameserver aaa.bbb.ccc.ddd
nameserver aaa.eee.fff.ggg
nameserver aaa.hhh.iii.jjj
search mydomain.com
It seems like ifconfig used to show which DNS servers were being addressed, but something has changed, I need to know whether I am referencing what I think I am... I have search this forum, googled, and come up empty... did the metrics go away with 8.2? Was I dreaming at 7.5?
I installed Debian Jessie on my Hummingbaord. I use it with apache, owncloud and minidlna but after some days i rebooted the system and then i can't log in with SSH anymore.
The message I get:
Access denied
Using keyboard-interactive authentication.
Password:
And this again and again, although I enter the right password. If I login directly on the Hummingboard all works normally...
I had a task to install nginx,i download the nginx-0.5.35.tar.gz and i extracted.I got following error when i ran these commands ./configure ----with-http_gzip_static_module & ./configure --with-http_geoip_module
[root@localhost nginx-0.5.35]# ./configure --with-http_gzip_static_module
./configure: error: invalid option "--with-http_gzip_static_module"
[root@localhost nginx-0.5.35]#
[code]....
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
I have a relative fresh install of jessie in which I face a high cpu usage of java (top shows about 165% CPU and 12% MEM). The problem occurs right after booting the computer. These values stay constantly high for days if I leave the box running. This happens even if the computer is just sitting there without doing anything.
I have to kill java to go back to normal. So, when I do a
Code: Select allkillall -KILL java
the problem goes away. After that it doesn't reappear and I can use all apps installed without a problem.
Currently I am based on openjdk
Code: Select allupdate-alternatives --display java
java - auto mode
link currently points to /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java
/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java - priority 1071
slave java.1.gz: /usr/lib/jvm/java-7-openjdk-amd64/jre/man/man1/java.1.gz
Current 'best' version is '/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java'.
But I have also tried the SUN version with the same result.
Where to look to find more information on what exactly java app is using so much resources and how I can solve it? I guess I could just put somewhere in rc.d a kill java command and forget about it but I would really like to find out whats going on...
I use debian jessie 8.1 and when i boot it, pc start fsck block clean etc.. but the fsck control is activated every on boot?
View 14 Replies View RelatedWhen i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.
View 4 Replies View RelatedHow can I verify the following service configuration files/setup are ok with?(in RedHat)
httpd
sendmail
ldap
DHCP
DNS
SQUID
For example, I can use "testparm" to verify the my samba configuration . I want a similar kind of testing option for the above mentioned options.
Configuring gpsd with Wheezy was a breeze. Just had to run "sudo dpkg-reconfigure gpsd", answer a few questions, and it worked like a charm. With Debian Jessie the following happens:
tsi@sxf-tsi:~$ sudo dpkg-reconfigure gpsd
Warning: Stopping gpsd.service, but it can still be activated by:
gpsd.socket
Creating/updating gpsd user account...
tsi@sxf-tsi:~$
How does one bring up the gpsd configuration dialog with Jessie?
I've after latest jessie update a problem with service samba restart. If I use "service samba restart", there is a timeout (after long time) and error.
Output of "systemctl status samba.service":
Code:
Select all● samba.service - LSB: ensure Samba daemons are started (nmbd and smbd)
Loaded: loaded (/etc/init.d/samba)
Active: failed (Result: timeout) since Mo 2014-10-20 02:16:57 CEST; 7s ago
Process: 6205 ExecStart=/etc/init.d/samba start (code=killed, signal=TERM)
Okt 20 02:16:57 server systemd[1]: samba.service start operation timed out. Terminating.
Okt 20 02:16:57 server systemd[1]: Failed to start LSB: ensure Samba daemons are started (nmbd and smbd).
[Code] ....
Whats going wrong. "service samba restart" should bring no error message if the service is not running previously.
I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
After installing Jessie, apt-get gives me a huge list of packages with the suggestion to autoremove them. Now, I've tried auto-remove once and was left with a naked Gnome, so I was wondering if there's another way to find out which packages I should keep and which I can safely remove. Is it safe to delete packages that cannot be found using the search function for the stable release? I checked them one by one here URL....How about linux images that won't appear in the above search?
linux-image-3.14-0.bpo.1-amd64
linux-image-3.14-0.bpo.2-amd64
linux-image-3.16-0.bpo.2-amd64
linux-image-3.16-0.bpo.3-amd64
linux-image-3.2.0-4-amd64
How about results shown by deborphan?
A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.I tried to do it manually in a format that worked on debian 7..Manual mount fails too.
umount My passport
fdisk -l (to see device name)
mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4
dmesg | tail
[ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found
[ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[code]....
DE: lxde
version: Jessie
using xorg file: no
After changing my video cards from gigabyte HD5450 and saphire X550 to two saphire r7 240s one of my debian installs no longer supports rotating the monitors either with 'Monitor Settings' or xrandr. The only difference between these 2 Jessie installs is that one was upgraded and the other one was fresh. The problem is with the upgraded one. On the fresh installed debian I just put the ati proprietary driver so I won't do further testing on it but xrandr was working fine on it before that.
I tried going over the ATIHowTo [URL] .... and everything looks good. Tried purging the non free firmware and reinstalling. I verified the version numbers of libxrandr2 and kernel of both installs. It is either some scrap left over from wheezy or a configuration file I am not aware of.
So what actually happens is xrandr does not say anything, blanks out all windows on the screen with only their background color and title bar showing, changes the lxpanel to its background pattern except for 2 blanked out boxes almost to the right of the screen( I have 10 tray icons there before it blanks), activates the screen I wanted to rotate with the proper rotation. On my main screen I can't click on anything. On the rotated screen I can right click and I get my openbox right click menu like I do on my main monitor before the command but when I try to run something nothing happens. The only way I can get out of this situation is to go to ctrl-alt-f1, log in as root and type 'service lightdm restart'.
Both of these monitors are connected to the primary video card, an ati r7 240 saphire. The main one is on vga and the other one is on DVI. I also have another monitor connected to HDMI but it's not being used. I have yet another monitor connected to the VGA of the secondary GPU I don't think it's a problem is it? I tried not using 'xrandr --setprovideroutputsource 1 0' and it still did the same thing.
I tried just launching openbox with no LXDE and it did the same thing.
Also another strange thing is when I stop the lightdm service and try to 'startx' or 'xinit' my screens go blank; numlock, control-alt-delete and control-alt-f1 do nothing and the only thing I can do is an emergency REISUB. I didn't configure this install to use startx or xinit yet but should it really lock up my system?
On the affected system my script looks like this (I already did this step by step and the 'rotate left' line is causing the problem):
Code: Select allxrandr --setprovideroutputsource 1 0
xrandr --output VGA-0 --primary --mode 1680x1050 --pos 0x0 --rotate normal
--output DVI-0 --mode 1680x1050 --pos 0x1050 --rotate left
--output HDMI-0 --off
--output VGA-1-1 --off
lxpanelctl restart
Additional info:
Code: Select all$ inxi -G
Graphics: Card-1: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
Card-2: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1680x1050@59.88hz, 1680x1050@59.95hz
GLX Renderer: Gallium 0.4 on AMD OLAND GLX Version: 3.0 Mesa 10.3.2
[Code] .....
I am using Jessie with XFCE and I tried to write a service which executes a script to change my wallpaper. When I try to start the service with systemctl start wallpaper.service it fails and I get the outout below from systemctl status wallpaper.service
I don't think it to be a permissions issue, they are -rw- r-- r--
This service is called by a timer that goes off daily. Below is wallpaper.service
I've recently noted that the boot process in my Jessie installation is occasionally taking longer than usual, not dramatically as in "really hanging", but still noticeably slower, during which some messages are printed along the lines of
Code: Select alla starting job is running (2 of 5) and also after that, once lightdm (I'm using the MATE desktop) comes up the screen gets painted slower as well.
Unfortunately, once the system is up and running there's no longer trace in the logs (either traditional syslogs or journalctl) of such messages, however what comes to mind is that I've just recently enabled persistent logging in systemd: could this be the reason of such (occasional) slower boot process?
Other than that, what else could cause such behaviour? What should I eventually check to ensure things are OK?
I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type
Code: Select allsudo modprobe 8821au
I get a
Code: Select allmodprobe: FATAL: Module 8821au not found..
But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:
Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko
it seems to work:
Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.
But lsmod doesn't show me the module after that.
I also added
Code: Select all./kernel/drivers/edimax/8821au.ko
to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.
So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.
My laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work
sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1: +55.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +54.0°C (high = +87.0°C, crit = +105.0°C)
[Code] ....
I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax
This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.
