In red hat linux server 6. I start up virtual manager and I get below error prompt.
Package required for KVM usage
The following packages are not installed
qemu-kvm
These are required to create KVM guests locally. Would you like to install them now. I press yes but the package cannot located ...
So, I have install the qemu-kvn-0.12.1.2.113.el6_0.8.src.rpm already.
I use command rpm -ivh XXX.rpm to install.
In red hat linux server 6. I start up virtual manager and I get below error prompt:
Package required for KVM usage. The following packages are not installed
qemu-kvm
These are required to create KVM guests locally. Would you like to install them now.
I press yes but the package cannot located ...
So, I have install the qemu-kvn-0.12.1.2.113.el6_0.8.src.rpm already.
I use command rpm -ivh XXX.rpm to install.
i have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
View 1 Replies View RelatedI am getting the following error when trying to open the Package Manager.
This is Ubuntu 10.10
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, E: Problem with MergeList /var/lib/apt/lists/br.archive.ubuntu.com_ubuntu_dists_maverick_main_b inary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
My ubuntu is Portuguese, I took the liberty of translating to facilitate the understanding.
I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
I try to install anything in terminal, synaptics update and package manager. I get this error in all those places deb' is not known on line 56 in source list /etc/apt/sources.list, E:The list of sources could not be read
View 5 Replies View Relatedwhenever i tried to open Synaptic package Manager the following messages shows:
E: Type '.net/tualatrix/ppa/ubuntu' is not known on line 2 in source list /etc/apt/sources.list.d/tualatrix-ppa-maverick.list
E: The list of sources could not be read.
Go to the repository dialog to correct the problem.
E: _cache->open() failed, please report.
Ubuntu Software Center, Update Manager, Synaptic package Manager all are jammed and indicates the same error. Except these everything works perfectly.
I am completely new at Ubuntu and would like to solve a problem I have when I try the update manager. I get this message:"Could not initialize the package information.An unresolvable problem occurred while initializing the package information.
View 2 Replies View RelatedWhen i run Synaptic Package Manager.I have an errorE: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
View 1 Replies View RelatedCode:
W: GPG error: http://archive.canonical.com karmic Release: Unknown error executing gpgv
W: GPG error: http://us.archive.ubuntu.com karmic Release: Unknown error executing gpgv
W: GPG error: http://us.archive.ubuntu.com karmic-updates Release: Unknown error executing gpgv
W: GPG error: http://us.archive.ubuntu.com karmic-security Release: Unknown error executing gpgv
W: GPG error: http://us.archive.ubuntu.com karmic-proposed Release: Unknown error executing gpgv
Along with the standard messages, apt-get displayed
Code:
gpg: symbol lookup error: /usr/local/lib/libreadline.so.6: undefined symbol: PC This occurs on using the update manager, package manager, apt-get update, etc. Any ideas? I've tried deleting the cached files, changing my server, checking that my date & time are correct (signing can be time sensitive), updating gpg (it was already at the latest), and maybe some other things I've forgotten.
This morning, Update manager downloaded and attempted to install linux kernel image and header files but failed with some sort of error. I'm trying to locate the error log for synaptic package manager. Anyway I rebooted and everything seems to work okay. Did anyone else have this problem? This is from the history:
Code:
Commit Log for Thu Jun 3 05:45:42 2010
Upgraded the following packages:
linux-headers-2.6.32-22 (2.6.32-22.33) to 2.6.32-22.35
linux-headers-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-image-2.6.32-22-generic (2.6.32-22.33) to 2.6.32-22.35
linux-libc-dev (2.6.32-22.33) to 2.6.32-22.35
My Ubuntu is 10.04 64bit.
Code:
$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=10.04
DISTRIB_CODENAME=lucid
DISTRIB_DESCRIPTION="Ubuntu 10.04.1 LTS"
I have an error message when I try to install a software with apt-get.
[Code]...
Have received errors the last two times I've run Update Manager. This one says: Package Operation Failed
The installation or removal of a software package failed.
Details:
installArchives() failed: Preconfiguring packages ...
Preconfiguring packages ...
(Reading database ... (Reading database ... 5% (Reading database ... 10%
[Code]...
subprocess installed post-installation script returned error exit status 1 The last error said something about "Max Reports". What I can't tell is whether the updates actually installed.
Ubuntu 11.04 was working fine and then when I went to open Synaptic, I got the following error:
An error occurred
The following details are provided:
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/viewizard.com_linux_debian_en
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
I get this error when I try to load Synaptic. In addition to that, the Ubuntu Software Center does not work when I try to search for and/or look at applications.
I am running Kubuntu 6.10. I opened adept package manager to create a new repository. It opened and I created the new repository (/home/dell/repository/)it went through. I closed adept. Opened adept and a error message reading this popped up: "The APT database could not be opened! This may because by incorrect APT configuration or some similar problem. Try running apt-setup and apt-get in terminal and see if it helps resolve the problem." I ran it in terminal (I was online) for both and update and upgrade in both apt-get apt-setup, but it tells me "E: type "/home/dell/repository/" is not known on line 1 in source list /etc/apt/sources.list E: The list of sources could not be read." I tried opening Add/Remove Programs but it did the same thing as adept. I am a linux newbie, and haven't toyed with APT database. When I added the new repository I just opened Manage Repositories and then entered "/home/dell/repository/", clicked add and it was put on the list as "Comment | /home/dell/repository/" in a grey text. I right clicked on it and clicked enable, it stayed grey. I left the program then. How can I fix the APT database?
View 1 Replies View RelatedI've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.
According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies View RelatedI'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
I keep getting an error message when opening the Synaptic Package Manager. "E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report." I also can't install any software from the software center. When I run the line in terminal, I get lost.
View 5 Replies View RelatedThis is the error I got when I tried to update it today. On the top the icon for the update manager is a red circle with a white line like a stop sign. When I click on it this is the error message I get. Could not initialize the package information. An unresolved problem occurred while initializing the package information.
please report this bug against "update-manager" package and include the following error message :
'E:Malformed line 54 in source list /etc/apt/sources.list (dist parse),
E:The list of sources could not be read.'
I have used Debian Linux for two years, most recently the seventh or so iteration of Version 5. I use the Gnome desktop and the Synaptic Package Manager, not the Update Manager, for updates because it's easier to build a log with the former.In my most recent update, Synaptic stripped out all the xserver-xorg files�47 in all. I thought it peculiar but did not know enough to interfere. When I rebooted, the system told me I must install xserver or correct GDM configuration and restart.Have I been hacked? Am I being tested by the Linux Illuminati? Or does it have something to do with the warning message I received at the end of the update-upgrade, attachedDebian_error_msg.png? And how do I go about reinstalling xserver? With Aptitude? I have tried running apt-get -f install, to no effect.
View 1 Replies View RelatedSince upgrading to Natty I have a very annoying issue and since I am unable to resolveWhenever I start the synaptics package manager I get the following message:An error occurred:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.Once I run sudo dpkg --configure -a from the terminal this is what I get:Setting up xulrunner-1.9.1 (1.9.1.18~hg20110309r27352+nobinonly-0ubuntu1~umd1) ...No further progress the machine hangs indefinitely on this, need to kill terminal to exit. Even hours waiting does not show any progress.
View 5 Replies View Relatedwhile trying to open synaptic package manager i get the following errer "E: The package clamav-daemon needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report."
View 5 Replies View Relatedwhen I try to install a package, I've the message The following packages have unmet dependencies:package-xy: Depends:lib-something (>= version_number) which is a virtual package.
View 14 Replies View RelatedI get an error when trying to run update manager or Synaptic - same thing from Ubuntu Tweak as well. I also tried to update via terminal
[code]...
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedAlright story is: i needed apache tom cat to work on my project, i don't wish to install it in ubuntu so i can keep my system clean and fast. I installed virtual box OSE. Do i need a disk to run? Cause it says "Fatal no bootable medium found system halted" Edit: alright i inserted my winxp disk and now it is installing, i need to know if any change i make will damage my computer? Since i allocated only 10GB to this virtual disk, now it is formatting it in NTFS...i hope it won't have any conflict with ubuntu's ext4 file system.
View 2 Replies View RelatedSo i have a small home server i need to setup. I used to have arch linux installed, but i found it unstable and more difficult to maintain. So i heard about the stability if CentOS and decided to try it out. I got samba setup no problem, but cups i cannot get to work. The orinter driver for my epson workforce 500 requires lsb 3.2 whereas lsb installed in centos is only 3.1. What can i do to fix this? Should i just go with fedora instead?
View 8 Replies View RelatedI am using CentOS release 5.2 (Final). Now the problem is the yum is not installing the pkg I required.
I am facing the following error.
The program package-cleanup is found in the yum-utils package.