I can't seem to get this to work without having to physically create connections as root. The "Available to all users" in the nm settings box remains uncheckable, despite completing the following tasks:
Ensuring NetworkManager.conf contains
[main]
plugins=keyfile
[code]...
Since a recent update on Stretch, I have been unable to use the network-manager to connect to my home wireless network on my laptop. It was working fine before. I did not change any settings on the WLAN router. I can still connect to other wireless networks at work and university, just not this particular one at home. All other non-Debian devices in my household are still able to connect just fine.While figuring this out, I have tried connecting manualy with ifup but I don't really know how that works. Right now there is only the loopback entry in /etc/network/interfaces.
Below is the output of syslog, when gnomes network-manager is trying to connect, but fails.
Code: Select allJul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: starting connection 'Affenbande'
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) started...
[code]...
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
It seems that my network manager may be running in root mode...
For instance in network connections, edit and delete are greyed out. if i click add, i am unable to enter any details. if i run nm-connection-editor as root i am able to make changes.
How can i set it that the normal user can make changes? [managed is set to true in the conf file]
My ethernet and pppoe internet connection worked flawlessly in lenny. I erased my hard drive and installed squeeze and now only internet works. (There is a pop-up that says that my wired connection is disconnected and shortly after there is another pop-up saying that my internet is connected.)1.my user is in the netdev group2./etc/network/interfaces only contains:
auto lo
iface lo inet loopback
3. /etc/NetworkManager/NetworkManager.conf only contains:
[code]....
I just upgraded my Debian stretch via apt-get and I noticed that the network manager is missing at least 2 icons: the mobile broadband icon and the settings icon. I haven't found any bug reports or other information about how to restore them. The icons were there after initial installation of version 8.2.0 from DVD.
KDE Plasma version 5.4.2
Qt Version 5.5.1
Kernel Version 4.2.0-1-amd64
After fossicking around I can not find anything around that I can invoke in a terminal to configure settings in network-manager. The applet(?) on the task bar doesn't ask for a login, so options are grey/grayed out. The "program" in the applications menu is similarly grey/grayed out.
If it was a once off, then I suspect that it would be simple as login as root to start X, but I have a series of config files to edited each time of their initial use. also, there is the ongoing problem of vpn target switching.
woops; wheezy with xfce4 and everything is uptodate.
After today's squeeze update the nm-applet (it updated it to version 0.8.4-1) crashes when trying to connect to my vpn (pptp). I'm pretty new when it comes to this so I'm not sure what to do. I tried looking at the log file (applications--> system tools-->log file viewer) but I don't know what to make of it.
Heres the log file before it crashes:
I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
View 1 Replies View RelatedI have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.
View 1 Replies View RelatedI'm trying to use network-manager in sid and it's incredibly frustrating because every 2 minutes or so it seems to scan for wireless access points, during which time my SSH connections completely hang and screw up. Pings start dropping packets as well. By doing an "iwlist scan" I can reproduce the behavior. Has anyone else dealt with this? I haven't been using network-manager, but I am currently due to mobility and needed VPN functionality... WICD with no network-manager works better but there's no gui-based VPN support. I've got an Atheros wireless device and I've read that supposedly it should be doing background scanning since kernel 2.6.32, but I haven't seen anything like that, and I'm on 2.6.32-5-amd64 currently, 2.6.32-3-amd64 behaves the same too.
View 4 Replies View RelatedIts my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
View 2 Replies View RelatedI use network-manager-gnome to connect to my wireless networks, but I can only use it with a graphical environment, and it doesn't even work that well since it will drop the connection after a few minutes and I have to reconnect it manually, that means I cannot leave my computer downloading a big file all night since it will only download for a few minutes, does anyone know what package can I use to connect to my wireless without the need of network-manager, even if it's through command line?
View 9 Replies View RelatedI installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies View RelatedI have just updated my Squeeze system. The update included a newer version of network-manager (and it can not be more than a few hours old). After the update all network functionality on my machine (via knetwork-manager) is broken. The GUI applet has no effect.
Hence can anyone help me: a) Downgrade network-manager by one version; b) Find out what is causing knetworkmanager to break; c) See if the problem is with knetworkmanager or network-manager.
I am currently using Debian Testing, managing my wireless connection with NetworkManager and the Gnome nm-applet. Both have just been updated: network-manager from 0.8.1-6+squeeze1 to 0.8.2-6 and network-manager-gnome from 0.8.1-2 to 0.8.2-4.On installation of the new packages, I have no problems. However, on a reboot, I can no-longer connect to any wireless connection. I am not prompted on start-up for the password to unlock the Gnome keyring and when I left-click on the nm-applet icon and then click on a network to connect to it, nothing happens.I do not think this is a driver or NetworkManager daemon problem. If I run "nmcli dev wifi" or left-click on the applet icon, NetworkManager seems to scan for wireless networks properly and returns a list including the one I wish to connect to.
View 9 Replies View RelatedI installed a fresh Debian Desktop without the LAN cable connected. After that I got message when I put the cable in:
Code: Select allNetwork Interface
Connection New Wired Connection failed
I have tried to re-install everything once again with the cable in, but during the Debian installation there was no network detected.
However, I proceeded and re-installed Debian. But the problem persists. It continues to re-connect and than disconnect. There is a symbol showing re-connection. The network eth0 is visible to the machine.
I booted Mint Live disc and the same happens there.
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedI have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.
View 6 Replies View RelatedRecently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedI would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
I'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
I'm running Debian testing. I am running the iwlwifi driver and I have an Intel Centrino Wireless-N 1000 card. I have a fresh install of iwlwifi and network-manager. After sleep or after being shutdown, network manager cannot find my network's SSID. I have to wait ~5 minutes for it list my SSID. I dual boot this laptop with Windows 7, and on Windows, I connect to the internet instantly after boot. I did not have this issue before, the only thing I have changed was installing blueman and the necessary components. After I installed and uninstalled these bluetooth components, I have been getting these problems. Here are some outputs:
iwconfig:
Code: Select alleth0Â Â Â no wireless extensions.
wlan0   IEEE 802.11bgn ESSID:"Dotcom"Â
     Mode:Managed Frequency:2.462 GHz Access Point: 14:AB:F0:3D:DC:20 Â
     Bit Rate=81 Mb/s  Tx-Power=14 dBm Â
     Retry short limit:7  RTS thr:off  Fragment thr:off
     Encryption key:off
[Code] .....
I just did an apt upgrade and for the most part everything is looking good. However when I boot up I have no network connection. Here is the result of trying to ping google: connect: Network is unreachable
I can fix it easily with a simple sudo dhclient eth0 but I was hoping someone would be able to suggest a more correct and less annoying solution. I have uninstalled network manager. This is a desktop computer with an ethernet connection and DHCP. I do not need anything fancy.
i'm trying to install virt-manager , to run a couple of virtual machines, i created a virtual nic vnet0 and bridged it to my eth0, i have configured the /etc/network/interfaces file with proper static ip, but i beleive the network manager is renaming my nic to eth1 and causing all kinds of problems. I uninstalled network manager and now i can ping anywhere in the network, but not outside it. ie google.com
View 5 Replies View RelatedAs above, my wheezy 32bit hangs at boot. the last few lines displayed are
Code: Select allMounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files...
Setting kernel variables ...done.
Setting up resolvconf...done.
Configuring network interfaces...
[Code] ....
I removed the files from /etc/network/interfaces.d/ just in case. i still can't boot up.
Resolved (I think) as on this post: [URL] ....