Debian Configuration :: Make Mailboxes For Each Virtual Host On Server?

Mar 1, 2010

I'm using Debian 5 with Exim 4 on my VPS. My purpose is to make mailboxes for each virtual host on my server. What do I have: 1. Exim is set correctly - receiving mail from [URL]... is successfull. 2. Mail for [URL]... is delivered, and the mail for [URL]... too. But [URL]... is the site written to /etc/hosts (it's localhost), and [URL]... is virtual host. But mail from both boxes writes to /var/mail/mail. Now what do I need: 1. Make mail for [URL]... store in [URL].... and mail for [URL].. store in www/Maildir. 2. Make mailboxes like [URL].... to receive mail by Thunderbird. 3. Set passwords for [URL]... and [URL]... (I don't want to enter my system user/root passwords).

View 2 Replies


ADVERTISEMENT

Server :: Debian Lenny - All Virtual Hosts Lead To First Virtual Host

Apr 21, 2010

I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.

First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)

Code:

Second virtual host file

Code:

And my hosts file

Code:

# The following lines are desirable for IPv6 capable hosts

Also I'm using a dyndns.org...would that make a difference?

View 2 Replies View Related

Server :: Postfix Management Web Interface For Virtual Mailboxes

Nov 7, 2010

I'm looking for a Postfix Management Web interface for user, domains, etc... The problem is I'm not using mysql for domains/users, so I can't use postfixadmin. I use virtual mailboxes as described here: [URL]

Basically all mappings are saved inside an /etc/postfix/vmaps file. The users/passwords files are in /home/vmail/passwd and /home/vmail/shadow. Users are in /home/vmail/$domain/$user

I searched for a web management tool that supports my config for weeks now, and can't seem to find any...

View 7 Replies View Related

Debian Configuration :: Local_parts_suffix - Exim Documentation To Allow Suffixes On Mailboxes For All Users

Feb 28, 2010

I'm trying to follow the exim documentation to allow suffixes on mailboxes for all users. For example, if user@domain is a mailbox, I want all mail directed to user-*@domain to be delivered user@domain. I've got the split-config-files option and have edited /etc/exim4/conf.d/router/600 to include local_part_suffix lines as follows:

[Code]....

View 1 Replies View Related

Server :: Apache2 Virtual Host Defaulting To Default Host

Oct 30, 2009

Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.

View 1 Replies View Related

Server :: Apache Virtual Host To Limit The Concurrent Connections Of Virtual Hosts?

Jul 3, 2009

apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.

View 1 Replies View Related

Security :: Virtual Server To Access The Main Host Or Another Virtual Se

Jan 8, 2010

Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?

View 5 Replies View Related

Server :: Create A Virtual Host And Virtual Ip In Proftpd Centos?

Nov 22, 2010

I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.

View 8 Replies View Related

Software :: Easy Way Of Managing Virtual Mailboxes?

May 3, 2010

I have been tasked with setting up a server (Well 2 actually!) I have a test bed set u and configured the way i require it. The only thing i'm still missing is some sort of management for Virtual mailboxes. Currently using Postfix/Dovecot combination. Dovecot is using separate user and password files per domain, But I cant expect other people to be able to manage text files and commands to update users.

I have been looking at virtualmin for complete management, but am wondering about how restrictive it will be on the rest of the server.So the question, is there an easy way (Or easier) of managing virtual mailboxes? (Users/passwords can be stored however works best.Currently using Ubuntu Karmic 9.10 but server installation will be either 8.04LTS or 10.02?

View 3 Replies View Related

Debian Configuration :: Virtual Server Not Rebooting?

Jul 6, 2015

I have a rented vserver running at Strato [URL]. It came preinstalled with Debian 7. I upgraded it to Debian 8, what seemed to run fine, all services running. The problems came up when I tried to reboot the server to test the init system. It just does not come up, I cannot ping it, nothing. I can boot into the rescue system, mount the system partitions and chroot in to the filesystem. In this state I also can run my services, including apache2 and mysql. In the syslog I find nothing about the reboot. Now I need to reboot ino the normal system. I already tried to resume to sysvinit without success.

View 7 Replies View Related

Ubuntu Servers :: How To Make Virtual Host Using Apache2

May 5, 2011

I want make several virtual Host using apache2. Each virtual host will have virtual domains in localhost with different root.

View 4 Replies View Related

Programming :: Multiple Virtual Host Configuration In Apache

Feb 20, 2009

How to give mulitple virtual host in apache. I want to access all my sites with ip 192.168.1.125

For ex :if i want to access dpm.net it should have the ip 192.168.1.230 with port 80 & for persur.net it should have the same ip 192.168.1.230 with port 80

After restarting the apache servers.I am unable to run both the applications in a single time.

For that i gave Include /etc/apache2/sites-enabled/[^.#]* in apache2.conf. But still its not working.

View 2 Replies View Related

Fedora Servers :: Make A Website With A Virtual Host Of Apache Visible?

Nov 8, 2010

In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):

[Code]...

It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!

View 2 Replies View Related

Debian Configuration :: Nginx And Httpd Virtual Package On Jessie Server

Oct 24, 2015

I've installed Nginx-full on a debian jessie server and want to install Wordpress, but for some reason Nginx-full isn't being seen as providing the httpd virtual package, so wordpress insists on installing apache.

According to everything I can find, nginx-full provides the httpd virtual package and this shouldn't happen. Is this a bug?

View 6 Replies View Related

Debian Configuration :: Both HTTP And HTTPS On Same Server? (Apache Virtual Hosts)

Oct 30, 2015

How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?

Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.

The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.

View 2 Replies View Related

Server :: Virtual LDAP Server And Virtual Mediawiki Host - Can't Login With Users From LDAP

Jun 5, 2011

In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.

I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):

Quote:

$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );

[code]...

I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).

View 5 Replies View Related

Debian Configuration :: Squeeze ServerXen Hypervisor Runs The Server As Dom0 Anda Virtual Windows XP?

Dec 23, 2010

I installed a new squeeze serverXen Hypervisor runs the server as Dom0 anda virtual Windows XP.The server runs samba, postfix, dovecot, squid, cups and hylafax with a Frritz ISDN card (module fcpci.ko).The used memory of Dom0 rises slowly (about 5MB /h) until the system crashes.As a workaround i installed a reboot every 24 hours.htop shows normal behavior.The system is already in production, so i can't stop services to track this bug.I need some hints how to debug the running system to find out, where the memory gets lots.

View 3 Replies View Related

Networking :: Bonded NICs At Host OS - Ubuntu Server - Bridged To Virtual OS - UServ - In VMware Server

Jul 19, 2009

Just something that struck me while working on our virtual servers today.

I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.

1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?

2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?

View 1 Replies View Related

Server :: Apache Server Not Recognizing Virtual Host Fedora 12

Apr 17, 2010

I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.

I have made the following additions to the /etc/httpd/conf/httpd.conf file

Code:

In addition to this, I have added this to my /etc/hosts file

Code:

I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too

View 10 Replies View Related

Server :: Apache With Virtual Host ?

Oct 5, 2009

On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first

For that domain I have installed virtual host.

Quote:

I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.

View 8 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Server :: Apache Disable SSL On A Virtual Host

Jan 22, 2010

I'm running Apache with mod ssl, with a php app using ssl. https://www.example1.com

I've made a virtual host to host a simple static site which I dont want SSL for.

When I try and get to the site it redirects me to [url] which gives a certifcate error and shows the site from example 1.

Config below:

View 2 Replies View Related

Server :: Apache Virtual Host Setup

Oct 29, 2009

I have 4 domains registered through godaddy. I have a dell poweredge box with one static IP hosted somewhere. I want the 4 domain to resolve to four different sites. I have already created 4 different sites in apache with four different aliases and has enabled it.

eg
alias /a /var/www/a
alias /b /var/www/b
alias /c /var/www/c

I want to acomplish.

www.a.com ==> xx.xx.xx.xx/a
www.b.com ==> xx.xx.xx.xx/b
www.c.com ==> xx.xx.xx.xx/c

I tried with godaddys forward with masking option. It works but I can't hide xx.xx.xx.xx/a in the links. Whats the best approach? One limitation is I cannot use the webhosts name servers. How do I set this up with name based virtual hosting? Do I setup a DNS server in the box?

I do have a dns host name for my box which is publicy accessible. Some my.ca.examplehost.net

View 3 Replies View Related

Server :: Apache With Wildcard SSL And Virtual Host

Apr 28, 2009

I'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.

And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)

For those that want similar functionality here's my discovery...

My configuration is like this:

ssl.conf:

Code:

I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.

It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.

View 2 Replies View Related

Server :: Different PHP Versions Per Apache Virtual Host

Sep 10, 2009

I'm running XAMPP 1.7.2 on Ubuntu 8.10 (Linux dt19.im.local 2.6.27-14-generic #1 SMP Tue Aug 18 16:25:45 UTC 2009 i686 GNU/Linux) and am using the PHP 5.3.0 Apache module as standard. For one virtual host I'd like to use PHP 5.2.X as it is part of a project which has a lot of legacy code which is not compatible with PHP 5.3.0. The virtual host configuration block and the applicable directory directive are as follows -

Code:

Checking phpinfo() output on the above virtual host (or using the default virtual host directive and accessing it via http://localhost/[SNIP]/[SNIP]/phpinfo.php rather than [url] shows PHP 5.3.0 is running. After applying minor tweaks such as adding ScriptAlias or SetEnv options the problem persists. I've Googled for a good while and have checked the permissions and the like and tried the advice of other users (XAMPP or otherwise) either resulting in PHP 5.3.0 being used or a HTTP 400 bad request/invalid URI error. I've stuck with the configuration above as this is correct according to the PHP manual.

FYI cgi-bin/php-5.2.6 is a soft symbolic link to /opt/lampp/bin/php-5.2.6 (I've added the FollowSymLinks option to the cgi-bin directory directive in httpd.conf). I've tried installing php5-cgi from the Ubuntu repos and setting it up in a similar way, to no avail. I've also tried copying the executables into the cgi-bin directory, pointing the Action line directly to bin/php-5.2.6 and dropping the -c /opt/lampp/etc/php.ini-pre1.7.2 option in the Action line. I've even tried commenting out the LoadModule lines for PHP which results in a HTTP 400 bad request/invalid URI error. This demonstrates the fact that the PHP CGI use is being ignored.

I've checked httpd.conf and the extra/httpd-*.conf files and ensured all required includes are being loaded. I know that it's probably something stupid on my part which is causing this! Given that I've tried PHP CGI builds in the Ubuntu repos I don't think this is an XAMPP-specific issue.

View 1 Replies View Related

Server :: Accessing An Apache Virtual Host ?

Jan 19, 2010

One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.

I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.

View 4 Replies View Related

Debian :: Apache Virtual Host On A Different Port?

Apr 19, 2011

Just set up a virtual host on a different port: 50085. accessing this port always returns me to 'It Works!' page.

The setup:

1. added 'Listen 50085' in ports.conf

2. added a <VirtualHost *:50085></VirtualHost> the content are the same with the site that works with a <VirtualHost *:80>

3. /etc/hosts contains the ip address and the servername

4. apache server has been configtest ok and restarted.

Anything I forgot to configure? How to troubleshoot --> I don't get any data on error log file.

View 1 Replies View Related

Server :: Apache 2.2.14 Ignores SSL Cipher In Virtual Host

Feb 23, 2010

I'm trying to figure out why Apache is ignoring SSL Cipher statements when placed inside a Virtual Host. Specifically I'm trying to disable SSLv2 and only allow SSLv3 or TLSv1

In httpd-ssl.conf I have the following

Code:

And when I try and connect, I get the expected results.

Quote:

In my virtual host statement I have

Code:

The only difference between the two is the httpd-ssl.conf has -ALL in the CIPHER, and the virtual host entry has ALL. However if I try and change the ALL statement in the virtual host entry to -ALL I get the following error in my logs & get no content.

Quote:

Why it's not working in the virtual host statement? Unfortunately as many of you are probably aware it's impossible to gain PCI certification with SSLv2 enabled.

View 5 Replies View Related

Server :: Configuring Alias Phpmyadmin In Virtual Host?

Nov 9, 2010

i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file

the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"

i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site

this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for

<VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)

[Code]....

why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)

View 8 Replies View Related

Server :: Name Based Virtual Host For Apache And Tomcat

Jul 22, 2010

I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved