Server :: Create A Virtual Host And Virtual Ip In Proftpd Centos?
Nov 22, 2010I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies
ADVERTISEMENT
Server :: Apache Virtual Host To Limit The Concurrent Connections Of Virtual Hosts?
Jul 3, 2009apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies View RelatedServer :: Debian Lenny - All Virtual Hosts Lead To First Virtual Host
Apr 21, 2010I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
Security :: Virtual Server To Access The Main Host Or Another Virtual Se
Jan 8, 2010Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies View RelatedCentOS 5 Server :: Configuring Alias Phpmyadmin In Virtual Host?
Nov 10, 2010i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for <VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
NB : my phpmyadmin is install on /usr/share/phpmyadmin with /etc/httpd/conf.d/phpmyadmin.conf as phpmyadmin configuration file
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
Server :: Virtual LDAP Server And Virtual Mediawiki Host - Can't Login With Users From LDAP
Jun 5, 2011In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
CentOS 5 Server :: Create Qcow2 Image In 5.5 Virtual Machine Manager?
May 18, 2010I'm trying to set up a virtual machine environment in Centos5.5. My hardware fully supports virtualization, and I'm running qemu as the hypervisor with Virtual Machine Manager as the GUI to manage and create VMs. Host hardware is a Dell PowerEdge T710, with a quad core Xenon processor and four 1TB disks in a raid 6 array.
Within the Virtual Machine Manager when trying to create a new VM, there is the option to not "allocate entire virtual disk now". What format is created when you "allocate entire virtual disk now" and when you don't?
I want to create a qcow2 image format, but it doesn't look like it is supported. Does anybody know how to create a VM with a qcow2 image format?
When you create a blank disk with "qemu-img create -f qcow2 disk.qcow2 3700G", it indeed does create a qcow2 image. However, Virtual Machine Manager is unable to read these images, claiming that it is 15 megs or so in size (which is what it actually occupies in host disk space until you try and put a VM into it).
Ubuntu Servers :: Create A Virtual Host For A Php Project?
Apr 28, 2011I needed to create a virtual host for a php project I'm working on. Rather than using command line and text editors, I installed webmin to accomplish this and hopefully perform other server configuration in the future. When I created the virtual host and tried applying the changes Apache wouldn't re-start, and still doesn't restart after complete re-boot. It's getting hung up at the end of apache2.conf, which is trying to include /etc/apache2/sites-enabled/000-default.
When I look at 000-default from a File Browser, it's a linked file to etc/apache2/sites-available/default I can open both the linked file and actual file in a text editor, and it looks fine. When I view the directory, /etc/apache2/sites-available from shell, the default file isn't visible. It seems this "invisibility" is probably related to the error, which is preventing start-up. Can anyone explain why the file would be visible from the Ubuntu File Browser GUI but not from the terminal, and how I can fix so apache can recognize this on start-up?
Server :: Apache2 Virtual Host Defaulting To Default Host
Oct 30, 2009Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View RelatedGeneral :: Create And Configure A Virtual SAN Disk And Work On It With Virtual Machines?
Jun 29, 2010I would like to configure and SAN disk. But I do not have a physical SAN disk. Is it possible to create and configure a Virtual SAN disk and work on it with virtual machines?I have around 400GB of space in my Laptop.
View 7 Replies View RelatedCentOS 5 Server :: Loading Multiple Virtual Host Conf Files From Httpd.conf?
Jun 1, 2009I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
Server :: Apache With Virtual Host ?
Oct 5, 2009On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first
For that domain I have installed virtual host.
Quote:
I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.
CentOS 5 :: Copied Files Into A Virtual Host Container But Cannot Access The Site?
Sep 8, 2010Has anyone had issues installing Drupal on centos. I have copied my files into a virtual host container but cannot access the site. When I place a phpinfo file into the folder and browes to it I see that Virtual Directory Support is "Disabled" However how did the php page get shown from the same virtual directory mm I may have asked to soon.Installing Drupal on CentOS 5/Red Hat/Fedora http://drupal.org/node/32773
View 1 Replies View RelatedServer :: Apache Disable SSL On A Virtual Host
Jan 22, 2010I'm running Apache with mod ssl, with a php app using ssl. https://www.example1.com
I've made a virtual host to host a simple static site which I dont want SSL for.
When I try and get to the site it redirects me to [url] which gives a certifcate error and shows the site from example 1.
Config below:
Server :: Apache Virtual Host Setup
Oct 29, 2009I have 4 domains registered through godaddy. I have a dell poweredge box with one static IP hosted somewhere. I want the 4 domain to resolve to four different sites. I have already created 4 different sites in apache with four different aliases and has enabled it.
eg
alias /a /var/www/a
alias /b /var/www/b
alias /c /var/www/c
I want to acomplish.
www.a.com ==> xx.xx.xx.xx/a
www.b.com ==> xx.xx.xx.xx/b
www.c.com ==> xx.xx.xx.xx/c
I tried with godaddys forward with masking option. It works but I can't hide xx.xx.xx.xx/a in the links. Whats the best approach? One limitation is I cannot use the webhosts name servers. How do I set this up with name based virtual hosting? Do I setup a DNS server in the box?
I do have a dns host name for my box which is publicy accessible. Some my.ca.examplehost.net
Server :: Apache With Wildcard SSL And Virtual Host
Apr 28, 2009I'm using Apache 2.2 to host multiple subdomains using a single SSL certificate (a wildcard certificate e.g. *.mydomain.com) and, yes, it works! Everything seems to be served correctly and the browsers are pretty happy.
And you can also have the non-SSL sites (virtual hosts on port 80) on the same IP. (That's covered elsewhere)
For those that want similar functionality here's my discovery...
My configuration is like this:
ssl.conf:
Code:
I would have to say that I don't believe that this will work if you are not using a wildcard SSL certificate and having anything other than subdomains under that wildcard.
It is somewhat limited in scenario where this is useful, but for a set of company websites that should be under SSL, this can be tremedously useful when you have a single IP.
Server :: Different PHP Versions Per Apache Virtual Host
Sep 10, 2009I'm running XAMPP 1.7.2 on Ubuntu 8.10 (Linux dt19.im.local 2.6.27-14-generic #1 SMP Tue Aug 18 16:25:45 UTC 2009 i686 GNU/Linux) and am using the PHP 5.3.0 Apache module as standard. For one virtual host I'd like to use PHP 5.2.X as it is part of a project which has a lot of legacy code which is not compatible with PHP 5.3.0. The virtual host configuration block and the applicable directory directive are as follows -
Code:
Checking phpinfo() output on the above virtual host (or using the default virtual host directive and accessing it via http://localhost/[SNIP]/[SNIP]/phpinfo.php rather than [url] shows PHP 5.3.0 is running. After applying minor tweaks such as adding ScriptAlias or SetEnv options the problem persists. I've Googled for a good while and have checked the permissions and the like and tried the advice of other users (XAMPP or otherwise) either resulting in PHP 5.3.0 being used or a HTTP 400 bad request/invalid URI error. I've stuck with the configuration above as this is correct according to the PHP manual.
FYI cgi-bin/php-5.2.6 is a soft symbolic link to /opt/lampp/bin/php-5.2.6 (I've added the FollowSymLinks option to the cgi-bin directory directive in httpd.conf). I've tried installing php5-cgi from the Ubuntu repos and setting it up in a similar way, to no avail. I've also tried copying the executables into the cgi-bin directory, pointing the Action line directly to bin/php-5.2.6 and dropping the -c /opt/lampp/etc/php.ini-pre1.7.2 option in the Action line. I've even tried commenting out the LoadModule lines for PHP which results in a HTTP 400 bad request/invalid URI error. This demonstrates the fact that the PHP CGI use is being ignored.
I've checked httpd.conf and the extra/httpd-*.conf files and ensured all required includes are being loaded. I know that it's probably something stupid on my part which is causing this! Given that I've tried PHP CGI builds in the Ubuntu repos I don't think this is an XAMPP-specific issue.
Server :: Accessing An Apache Virtual Host ?
Jan 19, 2010One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.
I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.
CentOS 5 Networking :: How To Create Virtual IP's
Mar 29, 2011I have one static IP, how can i turn it into multiple IPs so i can run multiple games on one machine.
View 2 Replies View RelatedCentOS 5 :: Install Vmware Server On 5.5 - Error "You May Not Power Virtual Machine In Virtual Machine"
May 27, 2010I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedCentOS 5 Networking :: Virtual Host Entries Are Not Working When Accessed From External Static IP?
Jan 16, 2011I had made following entries in my httpd.conf file at centos5.5.
###########################
Listen 80
Listen 8080
Listen 8085[code]....
When i am trying to access the any directory other on port *80, its not being accessible from the static ip which is routed through a DMZ server. http://122.165.35.9:8085 something like this returns the error "could not connect to web browser"
Server :: Apache 2.2.14 Ignores SSL Cipher In Virtual Host
Feb 23, 2010I'm trying to figure out why Apache is ignoring SSL Cipher statements when placed inside a Virtual Host. Specifically I'm trying to disable SSLv2 and only allow SSLv3 or TLSv1
In httpd-ssl.conf I have the following
Code:
And when I try and connect, I get the expected results.
Quote:
In my virtual host statement I have
Code:
The only difference between the two is the httpd-ssl.conf has -ALL in the CIPHER, and the virtual host entry has ALL. However if I try and change the ALL statement in the virtual host entry to -ALL I get the following error in my logs & get no content.
Quote:
Why it's not working in the virtual host statement? Unfortunately as many of you are probably aware it's impossible to gain PCI certification with SSLv2 enabled.
Server :: Configuring Alias Phpmyadmin In Virtual Host?
Nov 9, 2010i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for
<VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
Server :: Name Based Virtual Host For Apache And Tomcat
Jul 22, 2010I am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View RelatedDebian Configuration :: Make Mailboxes For Each Virtual Host On Server?
Mar 1, 2010I'm using Debian 5 with Exim 4 on my VPS. My purpose is to make mailboxes for each virtual host on my server. What do I have: 1. Exim is set correctly - receiving mail from [URL]... is successfull. 2. Mail for [URL]... is delivered, and the mail for [URL]... too. But [URL]... is the site written to /etc/hosts (it's localhost), and [URL]... is virtual host. But mail from both boxes writes to /var/mail/mail. Now what do I need: 1. Make mail for [URL]... store in [URL].... and mail for [URL].. store in www/Maildir. 2. Make mailboxes like [URL].... to receive mail by Thunderbird. 3. Set passwords for [URL]... and [URL]... (I don't want to enter my system user/root passwords).
View 2 Replies View RelatedServer :: Apache 2.0 - Setup SSL Client Authentication On Only One Virtual Host
Aug 18, 2010I was trying to setup SSL Client authentication on only one virtual host. Here is a brief excerpt sample of my conf file for the virtual host:
<VirtualHost xx.xx.xx.xx:443>
SSLRequire %{SSL_CLIENT_S_DN_O} eq "something"
SSLVerifyClient require
SSLVerifyDepth 2
</VirtualHost>
But when I try to check for syntax errors tells me SSLRequire not allowed here I do not want to add SSLRequire on the main httpd.conf because I only want it for one virtual host. The rest of the virtual hosts do not need it.
Server :: Apache Refuses To Start Using PerlModule And Virtual Host
Nov 12, 2009I'm trying to install two instances of OCS Inventory on the same machine using virtual hosts in apache. The apache configuration for it is in it's own file and it works fine without any virtual host. If I add it apache refuses to start without giving any error message. I narrowed it down to some lines loading perl modules, and if I comment them away apache will start again. Some of the modules work, but some of the ones specific to OCS Inventory will not work. I can't understand what the difference is between loading it in a virtual host or not, it doesn't make any sense to me!
View 2 Replies View RelatedServer :: Setup Name-based Virtual Host Using COMCAST 10.1.10.* Network?
Sep 29, 20091) My Internet connection is COMCAST with a router box and one public IP address.2) My web server is Apache using 10.1.10.200 as its address.3) Now I want to add another host name (www.myhealth.com) on my server. I did DNS forwardin (with Godaddy) to my COMCAST static IP address.4) I also added (in my httpd.conf) a block for virtual hosting
View 4 Replies View RelatedNetworking :: Bonded NICs At Host OS - Ubuntu Server - Bridged To Virtual OS - UServ - In VMware Server
Jul 19, 2009Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
Server :: Apache Server Not Recognizing Virtual Host Fedora 12
Apr 17, 2010I installed apache server on my Fedora 12. Its showing the test page 127.0.0.1, but when I give the address 97.168.234.76 (0r www.chaalu-kam.com), it tells that the requested url could not be retrieved.
I have made the following additions to the /etc/httpd/conf/httpd.conf file
Code:
In addition to this, I have added this to my /etc/hosts file
Code:
I wanted to test the Apache server on my laptop only by putting an html file in /var/www/html and naming it as index.html. I want this index.html page to be displayed when I put www.chaalu-kam.com in my browser. What should I do? My firewall is off too