Debian Configuration :: Kernel Not Updating To 3.16
Jul 26, 2015
Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.
Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23
What have I missed?
Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
I am an old Debian user, ho just reinstalled it again to see how it evolved since my las version (3.2). I am sharing it with Arch Linux, And decided to let bot of them. I am using GDM compiled and configured in Arch, and removed GDM2 from Debian (i just like the easy menu.list from the old GDM). The problem is that when i update the kernel, it didn't fing GDM and drops an error message. I tried removing the distro-preconfigured Kernels, as i compiled my own 3.0.0-rc2 Kerenel, but i cant delete the previous ones. Now everytime i do an install or uptgrade, apt-get drops wastes some time, and drops an error message:
[code]...
What can i do? i googled some similar errors, but where just messed up mirror.lists, or similar, i know it isnt the cause of fail.
I recently installed Debian "Squeeze" onto a Thinkpad T420, alongside Windows 7. During the installation Debian was unable to detect my NIC (Intel 82579LM), but otherwise the installation completed normally. I've installed the required e1000e drivers, and added "alias eth0 e1000e" to the modules file. Using lspci I can see that the computer detects the card, but still fails to load the drivers for it.
I'm at a bit of a loss, as this is my first time using Linux. After a bit of searching it looks like the 2.6.38 kernel resolves the issue with this card, so I guess that's my next step.Unfortunately all the installation instructions I've found assume an internet connection.Is there a simple way to update the kernel without a connection, or -even better- an install disc with 2.6.38 so I can start from scratch?
I was trying to update my debian lenny and aptitude gives a whole lot of errors about files it can't fetch due to a 404 error. Aparently de files i need are no longer available in the places they where supposed to on de Debian-servers.It concerns 35 packages that can't be updated. If nescessary I can post all the package-names and versions (old and updated). I'll give the two first as examples :
I have always used apt-get to update the system. Yesterday, I was doing some tests and one of them was to try to update the system using the aptitude command, instead. I ran aptitude update and then aptitude safe-ugrade. I thought that wouldn't be a problem, but I was wrong. This morning I found the computer just can't boot.
I get this message:
I have Squeeze in another partition on that computer. I can access the system through the terminal (the graphic is screwed). Is it possible to try my Lenny from this partition? If not, I also have a live cd for Squeeze. Right now I'm on another computer.
update-initramfs: Generating /boot/initrd.img-2.6.32-3-686 W: Possible missing firmware /lib/firmware/rtl8168d-2.fw for module r8169 W: Possible missing firmware /lib/firmware/rtl8168d-1.fw for module r8169
Anyone knows how I can fix this. According this "log" it seems to be that the firmware have been moved/removed?.. [URL]
It is the firmware for the network card, but it works fine....
I have a 3dsp pci wifi card, and the last kernel it supports is Ubuntu 10.04 2.6.32-(21-24) I want to update but dont want to accidentally update the kernal.
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:
- apt-get install linux-image-xx - apt-get install linux-source-xx - extract the source - copied the old .config from running 2.6 kernel over to the 3.16 directory - make oldconfig - make uImage - make modules - make modules_install - copied uImage to /boot
No error messages because its a headless device - its just not booting up.
I was wondering if anyone can assist me. I am looking to build a server with Debian as the host. When I installed Debian (Squeeze) the default kernel was "2.6.32-3-trunk-amd64". When I tried to install 'Virtualbox' application, I got a failure because I didn't have the 'kernel-headers' installed on my machine. I noticed there are no specific header package the 'trunk' kernel I was using. I have a few questions so I guess I should begin:
Is it safe to remove the 'trunk' kernel and boot my system on just the regular 2.6.32-3-amd64 kernel? Is this OK or not recommended? Please explain whatever is the correct answer. This is my 1st time using a 'Trunk' kernel so I don't know the in's and out's of it.
If I am using Debian 'Testing' for virtualization via 'Vbox', is there a specific kernel I "should" be using?
I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:
My girlfriend got a 'new' (second hand) laptop, a HP Compaq 6715s. When I tried to install Debian on it, the install went immensely slow - glacial, even. It was a very minimal install but it tooks hours to get to nowhere.
I found out online that this was because of a problem between the current kernel and the hard drive (or HD bus, something hardware-y to do with the disk) which meant file operations were extremely slow. I thought "easy, patiently install Debian and then install newer kernel". Except that after six hours, the install wasn't even halfway.
So I install Arch Linux with the 2.6.35 kernel: no problems with the drive speed at all. After a lot of researching (I only played around with Arch once, more than a year ago) I got the system into a usable state. But now wlan0 has suddenly disappeared, together with some other problems - and a usable laptop wasn't exactly what I had in mind, it was supposed to be awesome (or at least good). Which, with Debian, it would be
So... is it possible to make a Debian installation use a later version of a kernel? I'd want to install Debian with the 2.6.35 kernel, not install Debian and then afterwards update the kernel (because I don't have 24 hours to install an OS, if it'll ever even install).
I've found some stuff online but it might well have been written in the Cyrillic alphabet. All I understand, I think, is that in theory it's possible.
I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
Trying to compile the 2.6.36.2 kernel. Its not the first kernel I've compiled, but I've run into a problem I've not come accross before.
While compiling I get this error.
[Code]....
Looks like the headers sys/eventfd.h and linux/virtio_rng.h haven't been selected in my .config file. I just copied my old config from the last kernel I built. This was a while ago (2.6.30), but I thought I'd give it a go anyway.
what config option they are under or what I can do to get rid of this error?
This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
I'm running testing, so yesterday I upgraded to the new kernel (2.6.38). Unluckly I can't get to the desktop, because the system just hangs (screen goes black then nothing happens). I have found that my problem is the radeon (open-source) driver. When the it tries to get to the desktop it enters an infinite loop, so the system hangs. The bug is better described here: [URL]. However, I don't know how to fix it. I would prefer not to go to the fglrx (proprietary) driver because of tearing issues.
I have a system that was upgraded from Debian 7 to 8. Unfortunately it is not able to boot from the new kernel 3.16. Only the old 3.2 kernel is able to boot. I could transfer a backup, install it in Virtualbox, redo the upgrade and I can reproduce the error..The last error before "panic" is this line
Code: Select all 59.073579] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) Loading, please wait... [ 59.226154] systemd-udevd[53]: starting version 215 [ 59.326564] random: systemd-udevd urandom read with 4 bits of entropy available Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... /init: .: line 210: can't open '/scripts/init-premount/ORDER' [ 59.552148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
I use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
