I am want to host a lot of SOCK5 proxies and would like to know what's the best software/Linux build that could suit for hosting proxies for a while sub net on once instance. So I want roughly 256 ipv4's on one machine, what's the best way of doing this? I have looked into Dante but would like to know if there is there any better software multiple proxies?
View 2 RepliesIs there a way to configure apt to use different proxies for different repository servers?
View 1 Replies View RelatedI'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.
I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
Currently my DHCP Server is working now what i want to have is auto detection of squid proxy in any browser but I still got an error in my dhcp server when I restart it.
My Config:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
[code]....
I can not to start dnscrypt-proxy-1.6 like server.
I use the man: [URL]
The man work for dnscrypt-proxy-1.2. It was work good. On latest version the man don't work.
I want that my DNS server is work well work.
uname -a
Code: Select allLinux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux
cat /etc/dnsmasq.conf
Code: Select alldns-forward-max=500
bogus-priv
resolv-file=/etc/resolv-dnsmasq.conf
no-resolv
listen-address=192.168.1.5
bind-interfaces
cache-size=600
[code]....
My system is Reaspbian (Like debian but for Raspberry pi 2).
I am trying to set up my squid3 proxy as a transparent proxy - right now, I have to manually configure browsers to access via proxy. I understand that I have to put some rules into Iptables and also some further directives in the squid.conf.
I have a couple of specific questions. The proxy server is running on a Ubuntu 10.04 workstation and this machine also acts as a dhcp server for the network. I have just one subnet , namely 192.168.0.1-254 There is only 1 network card. Is it much easier to put in a second network card or is it just as easy to configure the existing lan card as a dual IP?
Is it necessary to configure these 2 IP's ( whether they are via 2 lan cards or dual IP on single card ) to be on different subnets. i.e ETH0 192.168.0.1 and ETH1 192.168.1.1 or is ok to have something like ETH0 192.168.0.1 and ETH1 192.168.0.254 ( where ETH0 is the one facing the LAN and ETH1 points to the modem router / switch i.e The Internet ) Where specifically do I save the Iptables rule configuration file and what must I call it ?
I want to start using squd3 as proxy server for one of my network 192.168.6.0/24
I was try using some configurations but http pages not loaded.
I was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies View Relatedi'm new to linux, and i want to create mumble servers for my friends.My first server is finished and he works but, is it possible to create multiples instances of mumble ?
View 1 Replies View RelatedI have VPS installed with Debian, NGINX, mysql, php and wordpress. By default the template gives 1 wordpress install in the /var/www/ directory. However, now I want to add more domains with wordpress to that VPS. I created a directory called /home/public_html/domain1.com and linked it to the /var/www/ directory. then I created another directory called /home/public_html/domain2.com and uploaded wordpress there. What I did next was edit my /etc/nginx/nginx.conf file with the following code:
Code:
user www-data www-data;
worker_processes 4;
events {
[code].....
Somone that know about any good free tool to brodcast multiple wecams true a *nix server? been looking for one a while now without any luck, i need
1: Users can connect to it by them self.
2: They need to register there own cams.
3: A login screen for the users brodcasting.
4: no need for users looking on the site to register (a + if they have to to be able to browse true the cams)
5: I dont want to spend alot of money on this, i planing to host this for free and the last thing i need is for me to have to pay money for it.
I'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.
I guess the best way is to use iptables but actually I can't get it working so
Im new in linux i want to configure my redhat machine as both router and transparent proxy!
View 1 Replies View Relatedhave multiple proxy servers for each subnet as a child server from the parent proxy servers
View 3 Replies View RelatedScenario:A - Local Unix machineB - socks proxy server port 1080C - remote mysql server port 3306I want to connect to the remote mysql server(C) from local unix machine(A) using sock proxy(B).
View 1 Replies View RelatedRHEL 5 is my proxy server. i want to remove temp files and cache . How do i remove cache and temp files.
View 3 Replies View Relatedwe need to log web access of a certain set of users for analysis. We decided to setup a proxy server which just logs all the requests but does not do anything else like caching/access control etc.All users will be using a fixed set of computers and hence we can redirect their requests to the proxy. I came across Squid, but found it to be too heavy for our requirements. Is there any other proxy-server software that is good enough for what we want or is Squid the only way?
View 1 Replies View RelatedI have a few friends that have seen me bypass firewalls with a socks proxy (SSH). I explained on how it works and how secure it is for browsing the Internet and checking your email in public places. I had at least 6 asked me if I could set up an account on my server for them and they would pay me! Now what I wanted to know was how I can set this up in a server and website where they can register an account and pay me through PayPal! I don't need help setting up the site! Just on how to set up the server to automate this. What tools are needed (ex. ISPConfig, jailkit.... stuff like that?) I don't mind doing this manually but if I get more people that would like this I don't really want to do every single one.
View 1 Replies View RelatedI want to make a transparent squid proxy server in centos. The squid proxy version is 2.6 stable. I made a normal squid server but want to make it transparent so that users do not need to enter the proxy settings in web browser. Even i searched about this on google but not getting it properly.I have two lan cards on centos system. ETH1 used for LAN and ETH2 used for WAN. And in this squid.conf i written "http_port 172.16.31.1:3128 transparent" and i also added a rule in iptables which is "iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128" but still i have to enter proxy settings at client's web browser to use internet
View 4 Replies View RelatedWe currently have a SUSE Apache2 reverse proxy server setup to reverse proxy (proxy_mod) our GroupWise Web Access server. Our SUSE box is located at www.domain.com. Our GroupWise Web Access server is located internally and is called GWMail. We are in the process of migrating from Novell to Windows, so we will have an exchange server with OWA access running on a Windows Server 2008 IIS7 box. That one will be called EXMail internally. Right now when someone goes to www.domain.com/gw/webacc it goes to the GWMail internal server from the outside world. This was all set up by previous techs who used Linux more.
We would like to set up reverse proxy to be able to reverse proxy to the Exchange Server from the outside world. Unfortunately the snag we are running into is that Exchange needs to run on port 443, and forwarding to port 443 has been a little tricky. I've read elsewhere we need to implement a generic TCP proxy, such as IPtables. what we need to do to get our SUSU Apache2 server to be able to reverse proxy to our Exchange server on port 443. For the save of argument lets call our SUSE server ExtranetServer. Below is our default-configuration.conf file's configuration:
[Code]....
I have installed proxy server on ubuntu.I have done every process which is needed to establish proxy server.internet is also working fine through proxy but the sites which needs to be blocked it is not blocking.it is opening.I have made entry of sites which i needed to be blocked in block_dstdomain file in proxy
View 3 Replies View Relatedhave to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
View 1 Replies View RelatedI have a problem in my server proxy.I'm using the debian etch distribution, only that now started showing this error:
201.42.212.47 sent an invalid ICMP type 3, code 0 error to a broacast: 0.0.0.0 on eth0
201.42.212.47 sent an invalid ICMP type 3, code 0 error to a broacast: 0.0.0.0 on eth0
201.42.212.47 sent an invalid ICMP type 3, code 0 error to a broacast: 0.0.0.0 on eth0
[code]....
how can we setup a socks proxy server.
View 7 Replies View RelatedI have done configuration of webserver and i want it to pick some information from application server,but i don want people to see that application server,please can someone tell me in detail on how to setup squid reverse proxy server so that each time people want to access my servers they can just see one server,i mean one server must act as a loadbalancer to other servers,let say a sum of up to three servers.I am using redhat 5 servers with apache 2,and squid version that i have is 2.6.
View 5 Replies View RelatedI've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies View RelatedI have a server that i built as 9.10 Ubuntu a while ago. It's been running through a proxy server that i set as an export in /etc/profile. Recently i upgraded it to 10.04 Ubuntu.
Now i want to get rid of the proxy server. I removed the export in /etc/profile. I've tried restarting the network services, reloading the profile, rebooting the machine, setting a blank export, and a few other things...but it's still using the proxy!
I've tried grepping various folders but the only other place i can find a proxy setting is in the apt config (which i don't think would matter?).
I want to SSH to my server which is some where on internet. I am having internet access on my lan via a proxy i.e. in firefox I have to specify the option of IP+ port of my proxy server.What do I need to do in order to be able to SSH to my server which is on internet.The proxy software used on the main server for creating it as a proxy server is ccproxy and that is a windows machine.I use Ubuntu and my server where I have to SSH is also a Ubuntu server.
View 5 Replies View Related