We have setup squeeze workstations with gnome, citrix receiver and vmware-view client. Which startup programs and daemons, for example avahi-daemon can be normally disabled or what is disabled on your workstations?
View 1 RepliesI've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
I got a problem with a Dell Latitude E5500. I can not disable the hardware beep after the gdm3 login screen has been loaded. All alsa beeps and system sounds are disabled and/or muted. I also tried setterm -blength 0, xset -b in startup scripts. They disable terminal-beeps, but not the halt or the gdm login beep. I tried wasting around with the gconftool, but nothing happened. It is an annoying sound. If you use, init 0 to shut down, no beep comes up.
View 10 Replies View RelatedHow do i disable startup programs in fedora 11.
actually pulseaudio sound system starts up every time i log in. It interferes with the vlc media player running on wine 1.1.13(compiled from source). i killed the pulse audio process, and every thing works fine, but i have to do it every time i log in
I recently made the switch from gnome to kde. After struggling for two straight days I finally have everything the way I want, and I must say that I am quite pleased with Kde. The one thing I want to do now is get my computer to start up without running printer applets and bluetooth and all that other stuff I don't need. I have had little luck finding any info on this one.
View 3 Replies View RelatedWhen installing Samba and Webmin I use the application "system-config-services" or (if it is easier to find for you that way) menu->Administration->Service management. In this application I can start the services I need (nmb, smb, webmin), but the enable/disable at startup setting is greyed out... Even when I start the application as root it still gives me no possibility to configure the services to start up on boot. This should be possible. It works this way in Fedora 13 and Fedora 14, so why not in Fedora 15?
Before reporting a bug, I would like to ask if other users here have the same problem (and -if possible- a solution)... In the mean tim I guess it is back to the old way of configurating services - sigh..
[edit] I tried to remove the [SOLVED] from the title, but the forum software does not seems to allow me to do that... I thought it was solved by installing xinetd, but I was happy a bit too early. I still have no answer for this problem.
How to auto start programs in startup time?
View 4 Replies View RelatedEverytime gnome starts up, the bluetooth applet has bluetooth enabled. I use it infrequently, so I always change it to disabled, but how do I make this the default setting for the bluetooth applet?
View 4 Replies View RelatedHow to best manage partitioning when install programs not from debian repositories?I just discovered that Debian installs applications not from repositories to /opt and /lib. Both directories or folders reside in root (/) partition.Having made my root (/) partition (which is only around 500MB) -- more than sufficient for holding a couple of linux images but NOT good for holding application.What is the best solution for resolving this? It's annoying and worrying that my system always reminds of a close to full capacity root partition.
View 7 Replies View RelatedAs title says, running unetbootin throws this error [URL]...... I can easily find the files myself (go to synaptic > look at installed files > scroll down) and I can't remove/purge because they would require me to remove some important software (XFCE).
FIX: Required some more 32 libraries.
I'm running debian unstable and since there was the switch to dependency based boot I can no longer control my boot services.I used to suppress the services that I use rarely during boot with: sudo update-rc.d -f myservice remove This arranged the links in /etc/rc?.d and everything worked.
Now this command only says: update-rc.d: using dependency based boot sequencing.This seems to work until I upgrade the service to a new version and it is enabled again.Do you have any idea of how to disable boot services permanently with the new system?
Howto disable IPV6 in Lenny?
I added this line:alias ipv6 off in /etc/modprobe.d/aliases:# cat /etc/modprobe.d/aliases
# These are the standard aliases for devices and kernel drivers.
# This file does not need to be modified.
#
# Please file a bug against module-init-tools if a package needs a entry
# in this file.
[Code]....
alias ipv6 offbut howto check after restart if ipv6 was loaded or not?
So from a web server stand point if we start using swap for httpd or mysql its bad and performance goes down the drain. So would it be a good or bad idea to disable swap entirely?
View 2 Replies View RelatedHow to completely disable hibernation in Debian Squeeze (with KDE). If it's impossible to disable it for whole system, I want to hide button in KDE menu.
View 3 Replies View RelatedI have got a debian (v3.16.7-ckt25-2) for server (without X). There is a br0 bridge connected to eth0 network device. It works fine when I start it manually by
Code: Select all# ifup br0 but I cannot start automatically at startup.
there was a missing line in /etc/network/interfaces:Code: Select allauto br0
I installed new ati radeon drivers in the morning because i was getting display/screen deformation when using some programs (like vertical lines and so on). Now everything is just fine but i can't get 3d accelerator to work and due to this some games are running very slow. I am a new linux user. I have done everything i know and searched this from the internet but i can't get 3d acc. to work again. i have installed new drivers over the old ones (or i don't know; mesa?)
[code]...
I've got Debian Sid x64 on my machine. Problem is that in my KDE setup several programs don't work, namely System Load Viewer plasmoid, plasmoid with temperature info and update-notifier-kde. System Load Viewer always shows 0% RAM and swap usage, as well as no processors, temperature sensors plasmoid shows no sensors available even after I installed lm-sensors and run sensors-detect, update-notifier-kde doesn't show any notifications even if I run aptitude update manualy. I might be mistaken but it seems to me that these three programs are not working because of some common reason, most likely some policy package either missing or misconfigured, but I can't figure out what is it.
View 4 Replies View RelatedI have Debian 7 running on RPi2 with Kodi. My NFS server is running on Slackware 14.1 which doesn't have full support for nfs4. I think this is causing some slowdowns/extra time when trying to stream video. Debian 7 by default mounts NFS as nfsv4, I would to like to disable this if possible. If so how?
View 1 Replies View RelatedI want to turn off frequency scaling permanently and totally in the lowest-level way possible. Is there a kernel command line that can be used or is recompiling the kernel without the governor stuff the only way?
Solved. Just modprobe -r and blacklist the acpi_cpufreq kernel module.
When I did external vulnerability scan of my servers, I discovered the following issue that I must correct:
THREAT:
This is the global system user list, which was retrieved during the scan by exploiting one or more vulnerabilities.
IMPACT:
These common account(s) can be used by a malicious user to break-in the system via password bruteforcing.
SOLUTION:
To prevent your host from being attacked, do one or more of the following:
RESULT:
So.. How can I prevent this scanner to reveal user names, in my case root ? Please help, It is mandatory for me to correct these issue.
Is there a way to disable the ip6v protocol permanent?
View 4 Replies View RelatedI am very pleased with a new Squeeze desktop that I built. I am use to using BSD style init scripts (Slackware, OpenBSD, Arch) and am trying to tweak my system not to start vsftpd at boot. I use vsftpd occasionally to move large files between computers on my LAN. My inittab shows run level 2 as default.
View 3 Replies View Relatedwant to disable apache2 so that it does not restart on boot so that I may evaluate lighttpd
View 1 Replies View Relatedmy thinkpad Edge 11 has some problems with the touchpad and the trackpoint, so i want to permanently disable the touchpad, but not the TrackPoint. Both are PS2 devices.
/dev/input/mouse0 --> TouchPad
/dev/input/mouse1 --> TrackPoint
How can i disable the device? In X it does not work with gpointing-device-settings
I have vnc4server installed and I can get it to work on a desktop by desktop basis, but I can't figure out how to get it to run on startup. There isn't a script for vnc in /etc/init.d/ How do I go about creating one? Is there a better way to solve this problem?
View 4 Replies View RelatedI tried recompiling a new kernel yesterday (2.6.34) on my debian sarge box, but I ran into multiple difficulties. These difficulties forced me to do a double dist-upgrade to lenny. The new kernel was (seemingly) compiled without any hiccups, and I ran dpkg -i on both the image and the header debs. They didn't install properly into grub, but I think I managed to fix that manually.Next thing I did was rebooting the server. It refused to come back up. Luckily my ISP has recovery tools, so I managed to switch back to the old kernel. It boots just fine with that kernel, but the problem is that there is no ssh daemon running! I can access it through ftp and do limited jobs through php, but nothing big, as I have no root access.Now, enough backstory. My question is: How can I install openssh-server onto the server remotely? I cannot access the server personally, as the server is in a completely different country.
View 14 Replies View RelatedI've been trying to setup Plymouth on Debian Squeeze, but have only been partially successful: Plymouth works with shutdown (i.e. I see Plymouth after I tell the computer to shut down), but not when I start up my computer (before it reaches GDM). In other words, Plymouth seems to work with my graphics, but for some reason does not show up at startup (not even briefly, as far as I can tell). I've searched the forums and followed this advice, as well as the instructions found here: [URL] but neither of those worked. I'm running Debian Testing (Squeeze) on a Thinkpad X41, which uses "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" for graphics.
View 4 Replies View Relatedhow can i setup ddclient at startup i already configured the client all i need is to let it start on bootup
View 3 Replies View Relatedwhen my computer starts up (from boot, reboot, hibernate or sleep) the speakers give out an annoying "boom".I an using Debian testing (wheezy kernel 2.6.32-5-amd64), with a Dell XPS L701. Alsa is version 1.0.23, and sound is working fine, other than this little annoyance.
View 6 Replies View RelatedI'm using xfce, and the power manager settings, to only lock the screen when close, are not honored. The laptop suspends, no matter what, when closed. Is there a way to forcibily only allow xfce power manager to handle the close lid behavior?
View 2 Replies View Related