when my computer starts up (from boot, reboot, hibernate or sleep) the speakers give out an annoying "boom".I an using Debian testing (wheezy kernel 2.6.32-5-amd64), with a Dell XPS L701. Alsa is version 1.0.23, and sound is working fine, other than this little annoyance.
View 6 RepliesI have an acer timelinex 5830tg notebook. After weeks of frustration, i finally have a linux setup that is stable. Thank god for debian. I don't know why I mess with anything else. Anyway, i'm unable to get my built in laptop speakers to work. I get sound through headphone jack, and I hear sound coming from the built in speakers for a split second when plugging in/unplugging my AC adaptor.Let me know if there is any other output needed, which may assist in this issue. Hopefully someone can help me out.
View 3 Replies View Relatedhttp://forums.logitechio.com/t5/2-1-2-0 ... d-p/216711
https://bbs.archlinux.org/viewtopic.php ... 48#p374748
This may be a bit late for the OP, but I thought to post here, as this thread seems to surface when googling for Audiohub problems. I had this roughly 10-20 Hz ticking/popping constant noise as well, and it seems to be related to the fact that the speakers are connected through a USB hub, not directly.
After experimenting a bit with the kernel USB configuration, the noise went away when I unselected
USB_EHCI_ROOT_HUB_TT and USB_EHCI_TT_NEWSCHED at "Device drivers - USB support - EHCI HCD". I think it is the latter option that made the difference. This was on kernel 2.6.25.4. Although marked experimental, both seem to be selected on Arch kernel26. On older kernels (2.6.20-2.6.24) you may have to select USB_EHCI_SPLIT_ISO, but there I am just guessing.
The hardware volume knob still does nothing (I don't think there is a hardware mixer, probably it just tries to communicate the volume changing request to the computer). Does anyone have idea how to make this work, it's kind of sad to have one and not be able to use it?
I have got a debian (v3.16.7-ckt25-2) for server (without X). There is a br0 bridge connected to eth0 network device. It works fine when I start it manually by
Code: Select all# ifup br0 but I cannot start automatically at startup.
there was a missing line in /etc/network/interfaces:Code: Select allauto br0
I have vnc4server installed and I can get it to work on a desktop by desktop basis, but I can't figure out how to get it to run on startup. There isn't a script for vnc in /etc/init.d/ How do I go about creating one? Is there a better way to solve this problem?
View 4 Replies View RelatedI tried recompiling a new kernel yesterday (2.6.34) on my debian sarge box, but I ran into multiple difficulties. These difficulties forced me to do a double dist-upgrade to lenny. The new kernel was (seemingly) compiled without any hiccups, and I ran dpkg -i on both the image and the header debs. They didn't install properly into grub, but I think I managed to fix that manually.Next thing I did was rebooting the server. It refused to come back up. Luckily my ISP has recovery tools, so I managed to switch back to the old kernel. It boots just fine with that kernel, but the problem is that there is no ssh daemon running! I can access it through ftp and do limited jobs through php, but nothing big, as I have no root access.Now, enough backstory. My question is: How can I install openssh-server onto the server remotely? I cannot access the server personally, as the server is in a completely different country.
View 14 Replies View RelatedI've been trying to setup Plymouth on Debian Squeeze, but have only been partially successful: Plymouth works with shutdown (i.e. I see Plymouth after I tell the computer to shut down), but not when I start up my computer (before it reaches GDM). In other words, Plymouth seems to work with my graphics, but for some reason does not show up at startup (not even briefly, as far as I can tell). I've searched the forums and followed this advice, as well as the instructions found here: [URL] but neither of those worked. I'm running Debian Testing (Squeeze) on a Thinkpad X41, which uses "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" for graphics.
View 4 Replies View RelatedI've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
how can i setup ddclient at startup i already configured the client all i need is to let it start on bootup
View 3 Replies View RelatedThe "System Settings/Startup Programs" window is large enough but the "Program" column is too narrow and it cannot be resized. The window can be dragged to make it larger but not the individual columns. It looks like a Java listbox with "Enabled = false" set. This occurs in Debian8 64 bit and also in Mint 17 and Mint LMDE2. I am surprised nobody else has raised the issue. I have a basic setup with 22" screen and 1680 x 1050 resolution. It occurs with Nouveau and NVidia drivers. It is not a critical bug so I have coped with it for 2 years but it would be nice to see it fixed. Unfortunately I could not upload a screen shot as "board attachment quota has been reached".
View 2 Replies View RelatedMy wireless in fresh Squeeze install would not connect automatically. I have to click on the network manager and enter the root password to connect every time I start up. I have "Enable Networking" and "Enable Wireless" checked in the Network Manager.
System>Preferences>StartupApplications>NetworkManager --- checked
NetworkManager>NetworkConnections>Wireless>[mywifinetwork]Edit>AutomaticallyConnect --- checked
There are only 2 lines now in /etc/network/interfacesauto loiface lo inet loopbackWhat should I do to get the NM to look for and connect wireless automatically at start up
I have a script that needs to start executing on startup. Because I originally wrote it for MacOSX I never cared to learn how to daemonize it (thanks launchd!). Are there any relatively easy ways to run it on startup on debian to?
View 2 Replies View RelatedWe have setup squeeze workstations with gnome, citrix receiver and vmware-view client. Which startup programs and daemons, for example avahi-daemon can be normally disabled or what is disabled on your workstations?
View 1 Replies View RelatedI got a problem with a Dell Latitude E5500. I can not disable the hardware beep after the gdm3 login screen has been loaded. All alsa beeps and system sounds are disabled and/or muted. I also tried setterm -blength 0, xset -b in startup scripts. They disable terminal-beeps, but not the halt or the gdm login beep. I tried wasting around with the gconftool, but nothing happened. It is an annoying sound. If you use, init 0 to shut down, no beep comes up.
View 10 Replies View RelatedHowto configure /boot/grub/menu.lst from Lenny to hide boot text messages during the startup?
View 14 Replies View RelatedI have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.
Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.
My plex media server does not work with systemd apparently but running the command below makes plex startup properly
Code: Select all/usr/sbin/start_pms &
Is there anyway to make this command run on my computer at startup.
I am running debian 8 jessie.
I've got an Acer 7736 and had quite a few issues with no sound after my install of 10.10. After quite a bit of fiddling I managed to get that sorted and I now how have sound. I believe I'm using alsa although pulse also does seem to be on here. The reason I say I believe I'm using alsa is that after startup, I have no sound on speakers unless I unmute it in alsamixer.
As I understand it alsa's supposed to save your settings on logout/shutdown/reboot but this doesn't appear to be the case, and I'm not able to find any asound.conf or the like in the places they're apparently supposed to be.
Well, the title pretty much sums it up. Whenever i plug in my external speakers, my laptop speakers continue to put out sound, which is good until i turn up the volume and hear rattling.
I am running ubuntu 9.04 64-bit 2.6.28-13 on an MSi GX620.
I have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
View 9 Replies View RelatedMy Toshiba Satellite Pro A200 running Fedora 8 continues to play sound out of the laptop speakers when external speakers are plugged in (and no sound out of the external). What can I do to diagnose/fix this? code...
View 7 Replies View RelatedI recently installed Kubuntu 9.04 Jaunty on my buddy's laptop. It's working alright, except when we try to plug the external computer speakers into the sound jack in the front, there is no change; it keeps playing through the onboard speakers. My friend and I are getting pretty frustrated because we use those speakers to watch movies with, and the onboard speakers aren't sufficient. If I need to provide any other info, let me know and I'll do so.
View 4 Replies View RelatedLaptop Model: C55-B5297
SoundCard/Chipset : Intel C210
Sound works through headphones but not through speakers. After trying for hours googling and different snd-hda-intel options in the /etc/modprobe. d/ alsa-base.conf file with no success I decided to reload deb.There is probably some snd-hda-intel option I havent tried yet to get what I need on this machine, or perhaps I'm just missing something all together.As stated sound works through headphone jack. I've gone into the system settings and there is no "speaker" or similar output device to select. I found many people report with the C210 that using Code: Select alloptions snd-hda-intel model=generic worked for them, but has not worked for me.
Current alsa-base.conf file reads (after format/reload)
Code: Select all# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
[code]....
I've dedicated most of today attempting to get some sound out of my Debian Lenny installation and I'm getting nowhere. I've tried a varity of potential solutions and still no peep from the machine. I'm using ALSA (and ran the 'alsaconf' utility with no errors and then used 'alsamixer' confirming that the volumne is set and not muted) for sound playback but nothing works?!? Here's some of the output that may resonate to some people...
Quote:
Quote:
Quote:
Quote:
I've tried everything that I could find online and installed a variety of alsa related stuff, but at this stage my lack of experience (coming from a Windows background) is really beginning show. The only unexplored thing is that the device is not listed in the xorg.conf file, but there doesn't seem to be many mentions of this online and a possible red herring. The only other thing is that when running the 'alsaconf' utility it does show two cards installed on the system, these are: via82xx and legacy. I've always selected 'via82xx' as the other options prompts 'Probing legacy ISA cards might make your system unstable.' I'm plugging the speakers into the 'green' audio out socket.
Finally, when running videos on mplayer it does report that it is using alsa as the audio output option and it doesn't highlight are errors...Oh yeah - the speakers have been tested and do work.
When I had Lenny installed I made this computer be my alarm clock (with sanduhr) to wake me up for school in addition to my mom's TV (because I am a heavy sleeper) and now I cannot use this computer to do so. I'm not saying it's a bug. I'm just asking, how do I enable it again? I know that with Lenny to enable/disable beeping, I went to System=>Preferences=>Sound but now I don't see how to make beeping work again.
View 11 Replies View RelatedI installed debian wheezy on my Acer laptop (5830tg) and everything worked fine. then a couple of months ago, I replaced my internal hdd with a bigger one, and moved the working old drive in a usb enclosure, so now i boot debian from usb, and keep windows on the internal. The problem is that when i boot from usb I get no audio from the speakers, just from headphones, but if i connect the hdd to the internal sata bay it works like a charm.
View 0 Replies View RelatedI installed debian stable but after the install i get no sound from the laptop speakers.my laptop is a acer aspire 9800 with intel hd audio.Headphone works correct with sound but not the internal speakers.the speakers are correct working in windows xp.I want a new better system than xp but if debian do not work with my internal speakers then it is a nogo.
View 2 Replies View RelatedI have a normal install of Ubuntu 10.04 with KDE, gnome, and xfce. Every time i try to do something sound related on my computer, my speakers won't work. I tried headphones, still wouldn't work. The Ubuntu 10.04 documentation didn't help much, and I'm plugging in the speakers correctly.
View 3 Replies View RelatedIm running Jessie, and have run into issue with my laptop sound card.
If is shutdown the laptop with the headphones plugged in, and remove them while its off, system wont recognize they are not there any more and is probably sending sound out to this output. To get the sound out to my laptop speakers I need to plug the headphones while the system is up, and remove them again. Only then will the output device work properly.
Code: Select allrebourn@laftofic:~$ lspci -v | grep -i audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
Code: Select allrebourn@laftofic:~$ cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf7a14000 irq 46
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7a10000 irq 44
[Code].....