I have vnc4server installed and I can get it to work on a desktop by desktop basis, but I can't figure out how to get it to run on startup. There isn't a script for vnc in /etc/init.d/ How do I go about creating one? Is there a better way to solve this problem?
View 4 RepliesI have got a debian (v3.16.7-ckt25-2) for server (without X). There is a br0 bridge connected to eth0 network device. It works fine when I start it manually by
Code: Select all# ifup br0 but I cannot start automatically at startup.
there was a missing line in /etc/network/interfaces:Code: Select allauto br0
I tried recompiling a new kernel yesterday (2.6.34) on my debian sarge box, but I ran into multiple difficulties. These difficulties forced me to do a double dist-upgrade to lenny. The new kernel was (seemingly) compiled without any hiccups, and I ran dpkg -i on both the image and the header debs. They didn't install properly into grub, but I think I managed to fix that manually.Next thing I did was rebooting the server. It refused to come back up. Luckily my ISP has recovery tools, so I managed to switch back to the old kernel. It boots just fine with that kernel, but the problem is that there is no ssh daemon running! I can access it through ftp and do limited jobs through php, but nothing big, as I have no root access.Now, enough backstory. My question is: How can I install openssh-server onto the server remotely? I cannot access the server personally, as the server is in a completely different country.
View 14 Replies View RelatedI've been trying to setup Plymouth on Debian Squeeze, but have only been partially successful: Plymouth works with shutdown (i.e. I see Plymouth after I tell the computer to shut down), but not when I start up my computer (before it reaches GDM). In other words, Plymouth seems to work with my graphics, but for some reason does not show up at startup (not even briefly, as far as I can tell). I've searched the forums and followed this advice, as well as the instructions found here: [URL] but neither of those worked. I'm running Debian Testing (Squeeze) on a Thinkpad X41, which uses "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" for graphics.
View 4 Replies View RelatedI've been using Debian since the early days of Lenny being testing as OS on the same Computer. Its a Acer Aspire Notebook with switches for wireless and bluetooth. While booting Lenny my wireless and bluetooth stayed off as long as I didn't switch them on. But since squeeze they get activated ( you can see it by looking at the LED's ) the moment after the grub screen. I now do have to turn bluetooth and wireless off by hand everytime which is quite annoying since I mostly use eth0.
how to disable bluetooth and wireless per default in a way I can simply turn them back on by using the switch?
how can i setup ddclient at startup i already configured the client all i need is to let it start on bootup
View 3 Replies View Relatedwhen my computer starts up (from boot, reboot, hibernate or sleep) the speakers give out an annoying "boom".I an using Debian testing (wheezy kernel 2.6.32-5-amd64), with a Dell XPS L701. Alsa is version 1.0.23, and sound is working fine, other than this little annoyance.
View 6 Replies View RelatedThe "System Settings/Startup Programs" window is large enough but the "Program" column is too narrow and it cannot be resized. The window can be dragged to make it larger but not the individual columns. It looks like a Java listbox with "Enabled = false" set. This occurs in Debian8 64 bit and also in Mint 17 and Mint LMDE2. I am surprised nobody else has raised the issue. I have a basic setup with 22" screen and 1680 x 1050 resolution. It occurs with Nouveau and NVidia drivers. It is not a critical bug so I have coped with it for 2 years but it would be nice to see it fixed. Unfortunately I could not upload a screen shot as "board attachment quota has been reached".
View 2 Replies View RelatedMy wireless in fresh Squeeze install would not connect automatically. I have to click on the network manager and enter the root password to connect every time I start up. I have "Enable Networking" and "Enable Wireless" checked in the Network Manager.
System>Preferences>StartupApplications>NetworkManager --- checked
NetworkManager>NetworkConnections>Wireless>[mywifinetwork]Edit>AutomaticallyConnect --- checked
There are only 2 lines now in /etc/network/interfacesauto loiface lo inet loopbackWhat should I do to get the NM to look for and connect wireless automatically at start up
I have a script that needs to start executing on startup. Because I originally wrote it for MacOSX I never cared to learn how to daemonize it (thanks launchd!). Are there any relatively easy ways to run it on startup on debian to?
View 2 Replies View RelatedWe have setup squeeze workstations with gnome, citrix receiver and vmware-view client. Which startup programs and daemons, for example avahi-daemon can be normally disabled or what is disabled on your workstations?
View 1 Replies View RelatedI got a problem with a Dell Latitude E5500. I can not disable the hardware beep after the gdm3 login screen has been loaded. All alsa beeps and system sounds are disabled and/or muted. I also tried setterm -blength 0, xset -b in startup scripts. They disable terminal-beeps, but not the halt or the gdm login beep. I tried wasting around with the gconftool, but nothing happened. It is an annoying sound. If you use, init 0 to shut down, no beep comes up.
View 10 Replies View RelatedHowto configure /boot/grub/menu.lst from Lenny to hide boot text messages during the startup?
View 14 Replies View RelatedI have to use pppoe because my ISP uses service names, and as far as I know the only program which lets me input a service name is pppoe (inside the pppoe.conf file). Networkmanager is buggy because it tends to disappear from the panel periodically and, worse, it doesn't reconnect (although the option is selected, it does reconnect only once).
So, for peace of mind I open a superuser terminal and enter "pppoe-start" and "pppoe-stop" to have everything I want (reconnects automatically, etc.). Now the question is: how can I have pppoe-start run at startup, automatically, without entering superuser mode, and without having a terminal open for this? Using Debian Testing (Wheezy).
I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.
Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.
My plex media server does not work with systemd apparently but running the command below makes plex startup properly
Code: Select all/usr/sbin/start_pms &
Is there anyway to make this command run on my computer at startup.
I am running debian 8 jessie.
if i stop that session, and come back later, it will have me log on at the login screen, but start a new session, with multiple instances of things..now, with vino, i could just keep the same session running, and when i VNC in, it just resumes it.. This one starts a new one.. i even tried just locking the screen, and it still starts a new one...i know there is an easy fix.. lol.. i just cannot find one.. i REALLY like how it shows me the ubuntu login on my server.. that is slick, so id like to keep that, if possible.
View 2 Replies View RelatedI tried to install vnc4server on my new ubuntu 11.04 but its fauling and here is the error log sunandi@sunandi-MM061:~/Downloads/linux-2.6.39.1$ sudo apt-get install vnc4server
[code]....
It has no monitor attached, I'm accessing it graphically through vnc4server.It has no graphics card, and I want to get OpenGL to work on it, using software rendering.Right now, when I try to run glxgears, I get this.
Code:
Xlib: extension "GLX" missing on display ":1.0".
Error: couldn't get an RGB, Double-buffered visual
I am trying out chrony as a replacement for openntpd as there is no longer an openntpd package in Debian Squeeze. Two questions:
1. Is there a necessity or equivalent to openntpd's "-s" option, where it forces the system's clock to the network time on daemon startup, regardless on how great the clock is off?
2. How do you configure as a client only, not as an ntp server at all? By default, it listens on UDP 123 and 323 (both ipv4 and ipv6) and definitely acts as a network time server (I can query remotely). I do not see anything obvious in the docs. Openntpd by default ran as a client daemon only.
When installing Samba and Webmin I use the application "system-config-services" or (if it is easier to find for you that way) menu->Administration->Service management. In this application I can start the services I need (nmb, smb, webmin), but the enable/disable at startup setting is greyed out... Even when I start the application as root it still gives me no possibility to configure the services to start up on boot. This should be possible. It works this way in Fedora 13 and Fedora 14, so why not in Fedora 15?
Before reporting a bug, I would like to ask if other users here have the same problem (and -if possible- a solution)... In the mean tim I guess it is back to the old way of configurating services - sigh..
[edit] I tried to remove the [SOLVED] from the title, but the forum software does not seems to allow me to do that... I thought it was solved by installing xinetd, but I was happy a bit too early. I still have no answer for this problem.
I had some issues with my system hanging on the automatic configuration of the install so I searched the web for the issue. After reading this thread: Hangs at end of SuSe 11 install I used acpi=off apm=off nolapci as the install options and it worked. My question is, do I need to add those options to the /grub/menu.lst or will the install do that?
View 9 Replies View RelatedI am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedI use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies View Related