Debian Configuration :: Compile The 2.6.36.2 Kernel?
Dec 16, 2010
Trying to compile the 2.6.36.2 kernel. Its not the first kernel I've compiled, but I've run into a problem I've not come accross before.
While compiling I get this error.
[Code]....
Looks like the headers sys/eventfd.h and linux/virtio_rng.h haven't been selected in my .config file. I just copied my old config from the last kernel I built. This was a while ago (2.6.30), but I thought I'd give it a go anyway.
what config option they are under or what I can do to get rid of this error?
View 2 Replies
ADVERTISEMENT
Sep 1, 2010
I am using the Debian stock kernel. I want a minimal kernel that works on my Pentium 4, 1GB DDR RAM machine. What do I have do to get a less resource hungry OS. Is there already a minimal kernel binary available?
View 2 Replies
View Related
Dec 25, 2010
Could someone give a step-by-step tutorial on how to do this, for someone with no more than a basic understanding of navigating the OS?
I'd like to include architecture specific flags instead of the generic i686 ones if possible.
So far, my tests have revealed that Arch Linux runs faster than Debian several media apps. I initially thought this was due to the i686 optimization of Arch, but other mentioned it could simply be a kernel timer issue.
I know for a fact the differences aren't due to bloat, and I've installed both OSes from minimal install means. Only the absolutely needed dependencies have been installed.
View 11 Replies
View Related
Apr 21, 2011
I would like to compile a custom xen dom0 kernel. I installed a Debian Squeeze with precompiled xen kernel, and it works fine, but i would like to compile a custom dom0 kernel from source. I tried install kernel source apt-get source linux-2.6 how can I patch this kernel source with xen? but i alway see only the domU kernel params.
View 3 Replies
View Related
May 5, 2011
I compile kernel with i686 architecture but I get linux-image-2.6.33.9-libre12.6.33.9-rt31_2.6.33.9-libre12.6.33.9-rt31-10.00.Custom_i386.deb. How I can do it ?
View 6 Replies
View Related
Aug 3, 2010
I've compiled 2.6.35 for my eeepc, but I have noticed that resulting .deb file is 30mb large. After investigating i saw that modules (and maybe kernel) are compiled with debugging symbols enabled.I've checked my lenny router and modules there are without debugging symbols.So stock 2.6.26 from lenny comes without debugging symbols and linux-image .deb file is around 20mb.Stock 2.6.32-5-686 from squeeze comes with debugging symbols enabled - linux-image .deb here is 26mb. (I have used 2.6.32's .config file to build my kernel, then i did make oldconfig.)I guess this is what increase my kernel size, but how to disable it?Or maybe enable stripping of debugging symbols.
View 3 Replies
View Related
Dec 17, 2010
This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.
View 4 Replies
View Related
May 3, 2011
When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:
1.) apt-get install linux-source-2.6.32
2.) mkdir ~/newkernel/
3.) cp /usr/src/linux-source-2.6.32.tar.bz2 ~/newkernel/
4.) cd /newkernel/
5.) tar xjf linux-source-2.6.32.tar.bz2
6.) cd linux-source-2.6.32
7.) cp /boot/config-$(uname -r) ./.config yes "" | make oldconfig
8.) change the driver file /newkernel/linux-source-2.6.32/drivers/gpu/drm/i915_drv.h manually
8.) make-kpkg clean
9.) make-kpkg --rootcmd fakeroot --initrd --revision=custom.001 kernel_image kernel_headers
10.) dpkg -i *.deb
Is this way OK or do I miss something?
View 14 Replies
View Related
Apr 16, 2011
I'm trying to compile the 2.6.38 kernel (from the Wheezy sources) on my Squeeze laptop and get the following error: "dpkg-buildpackage: error: debian/rules build gave error exit status 2" After doing apt-get build-dep linux-image-2.6.38-2-amd64 and apt-get source linux-image-2.6.38-2-amd64 I did dpkg-buildpackeg and here is what happened:
[Code]...
View 2 Replies
View Related
Dec 29, 2010
For sake of a clear picture of the problem, pretend I don't know anything about compiling.
How would I re-compile my current kernel's source? It's the i686 optimized kernel I selected from the install disc.
View 10 Replies
View Related
Feb 25, 2010
why it is that when I download the sendmail debian source package for etch and build it using dpkg-buildpackage -b -nc I get a 645543 byte sendmail executable whereas when I download the sendmail binary that is 703292 bytes.
View 1 Replies
View Related
Dec 21, 2015
So I am new to linux and i upgraded my kernel to 4.3.3 and to add the bfq patch. When i enter the command make install I get the following Code:
Select allupdate-initramfs: Generating /boot/initrd.img-4.3.3
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8107e-1.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-2.fw for module r8169
W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168h-1.fw for module r8169
[Code] ....
Now my ethernet drivers are not working.
View 8 Replies
View Related
Apr 5, 2010
I am not new to Debian and used to use commands like "apt-get install <package>", "apt-get update", "apt-get upgrade" and "apt-cache search <string>" regularly. But I never understood those Debian programs and the Debian package system with it's numerous programs and way to install things and work on software and configurations. Now, I just wanted to do something that I thought to be really easy. Get the source of an existing package. And despite spending over 3 hours - including reading the man-pages of commands - I cannot find a way!
Two things:
dpkg --get-selections | grep openvz
linux-image-2.6-openvz-amd64 install
linux-image-2.6.26-2-openvz-amd64 install
I already don't understand why I have two such packages installed. I would like to download the source of my kernel: apt-get source linux-image-2.6.26-2-openvz-amd64. This downloaded linux-2.6_2.6.26-21lenny4.dsc, linux-2.6_2.6.26.orig.tar.gz and linux-2.6_2.6.26-21lenny4.diff.gz
Then, I wanted to patch this - having found no explanation, I did:
cd linux
patch < ../linux-2.6_2.6.26-21lenny4.diff
That seemed to patch the kernel. But I am not sure - there are new files like this now_
[...]
Only in linux-2.6-2.6.26: xenctrl-capabilities.patch
Only in linux-2.6-2.6.26: xenctrl.patch
Only in linux-2.6-2.6.26: xenctrl-privcmd.patch
[...]
So, how can download the complete Debian kernel source? And what do I need to be able to compile it? And - HOW to just list all available sources and search in them?!? I found lots of webpages where tools like "make-kpkg" are used, which I do not understand again. Under SuSE, I could just select the package from a list, say "make oldconfig install modules modules_install" and be ready. Under Debian, I just find no way ...
View 14 Replies
View Related
Jan 24, 2010
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Jan 24, 2010
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies
View Related
May 27, 2010
I have been trying to compile a patched driver for use with my RTL8187L wireless device and get this error.
rm -f ieee80211/Module.symvers 2>/dev/null
rm -f ieee80211/Modules.symvers 2>/dev/null
make -C ieee80211 all
[code].....
View 3 Replies
View Related
Jul 6, 2010
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
View 14 Replies
View Related
Aug 20, 2010
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies
View Related
Nov 29, 2010
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies
View Related
Dec 7, 2010
On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?
View 5 Replies
View Related
Jul 9, 2015
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
View 6 Replies
View Related
Jul 26, 2015
Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.
Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23
What have I missed?
Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
[Code] .....
View 6 Replies
View Related
Sep 24, 2015
I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:
- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot
No error messages because its a headless device - its just not booting up.
View 2 Replies
View Related
Apr 12, 2010
I was wondering if anyone can assist me. I am looking to build a server with Debian as the host. When I installed Debian (Squeeze) the default kernel was "2.6.32-3-trunk-amd64". When I tried to install 'Virtualbox' application, I got a failure because I didn't have the 'kernel-headers' installed on my machine. I noticed there are no specific header package the 'trunk' kernel I was using. I have a few questions so I guess I should begin:
Is it safe to remove the 'trunk' kernel and boot my system on just the regular 2.6.32-3-amd64 kernel? Is this OK or not recommended? Please explain whatever is the correct answer. This is my 1st time using a 'Trunk' kernel so I don't know the in's and out's of it.
If I am using Debian 'Testing' for virtualization via 'Vbox', is there a specific kernel I "should" be using?
View 12 Replies
View Related
Sep 10, 2010
I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:
View 1 Replies
View Related
Sep 10, 2010
My girlfriend got a 'new' (second hand) laptop, a HP Compaq 6715s. When I tried to install Debian on it, the install went immensely slow - glacial, even. It was a very minimal install but it tooks hours to get to nowhere.
I found out online that this was because of a problem between the current kernel and the hard drive (or HD bus, something hardware-y to do with the disk) which meant file operations were extremely slow. I thought "easy, patiently install Debian and then install newer kernel". Except that after six hours, the install wasn't even halfway.
So I install Arch Linux with the 2.6.35 kernel: no problems with the drive speed at all. After a lot of researching (I only played around with Arch once, more than a year ago) I got the system into a usable state. But now wlan0 has suddenly disappeared, together with some other problems - and a usable laptop wasn't exactly what I had in mind, it was supposed to be awesome (or at least good). Which, with Debian, it would be
So... is it possible to make a Debian installation use a later version of a kernel? I'd want to install Debian with the 2.6.35 kernel, not install Debian and then afterwards update the kernel (because I don't have 24 hours to install an OS, if it'll ever even install).
I've found some stuff online but it might well have been written in the Cyrillic alphabet. All I understand, I think, is that in theory it's possible.
View 11 Replies
View Related
Oct 21, 2010
I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
View 8 Replies
View Related
Apr 11, 2011
This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies
View Related
Apr 11, 2011
This morning I upgraded two of my systems. The new 2.6.38 kernel fixed the missing pointer on the system that has an Intel video subsystem. Yay!
This afternoon I tried to upgrade my wife's systems. Aptitude is listing 2.6.32 as obsolete, but it isn't offering me 2.6.38. Was it withdrawn?
View 11 Replies
View Related
