This morning I upgraded two of my systems. The new 2.6.38 kernel fixed the missing pointer on the system that has an Intel video subsystem. Yay!
This afternoon I tried to upgrade my wife's systems. Aptitude is listing 2.6.32 as obsolete, but it isn't offering me 2.6.38. Was it withdrawn?
I have a problem. I'm using the latest Debian stable, Lenny. I am trying to get my usb wifi card working.
The Debian wiki advised me to upgrade my kernel to 2.6.30 using backports, because the drivers for my wifi chip are supposedly in the newer kernel.
So thats what I did. The install went fine. However, after rebooting the computer hangs when it is starting gdm. Only the desktop background appears with some fuzzy stripe over it, the mouse doesn't respond. Pressing ctrl+alt+f1 does nothing. I can only restart with ctrl+alt+del.
I can still use the computer with the old kernel. No problems there. I tryed disabling GDM and rebooting again with the new kernel. It boots up and works fine on command line. However when I type startx it hangs, just like before.
I'm not an expert, but I'm suspecting there might be problems with the graphic drivers in the new kernel.
When I installed lenny at first, X started fine. However 3d acceleration was not functioning. I got help from IRC, I had to install some package to enable direct rendering. Don't remember which one anymore.
Here's what lspci gives for VGA:
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedThere is something strange going on with Pidgin in Debian 6. I have just installed the system, then Pidgin, then configured my MSN accounts and chatted; but after rebooting, it no longer works. It just hangs while trying to connect - this is what I see from strace:
[Code].....
- a largish number of times. My very rough and ready thoughts about this so far are that it is probably not Pidgin that has an error, since 1) It worked initially, and 2) I am pretty sure the developers would have know about it very quickly if this was a general problem in Pidgin. On the other hand, my networking seems otherwise to be fine - s what is going on here?
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedI am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedI have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedI upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:
I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies View RelatedWith the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.
I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.
So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.
I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.
I installed Debian Squeeze on my Acer AspireOne yesterday, and was delighted to see that my ZTE MF627 broadband dongle (from 3 UK) appeared to work "out of the box". I wasn't able to connect due to lack of signal, but the behaviour was as I expected. (The dongle is one with a "zero CD" that needs to be ejected before the modem itself can be accessed. Recent versions of udev are supposed to do this automagically.)
However, when I tried to use the dongle today, I was unable to make it work. It appears that udev is no longer ejecting the zero CD when it is inserted, but is instead detecting the modem as a (non-functioning) serial port.
Here is the output from /var/log/syslog for the "successful" attempt. Note the disconnection at 4769.479857 which is followed by reconnection as a different device:
Jan 16 14:11:30 john-netbook kernel: [ 4759.175449] usb 1-2: Product: ZTE CDMA Technologies MSM
Jan 16 14:11:30 john-netbook kernel: [ 4759.175459] usb 1-2: Manufacturer: ZTE,Incorporated
Jan 16 14:11:30 john-netbook kernel: [ 4759.175762] usb 1-2: configuration #1 chosen from 1 choice
Jan 16 14:11:30 john-netbook kernel: [ 4759.180622] scsi3 : SCSI emulation for USB Mass Storage devices
Jan 16 14:11:30 john-netbook kernel: [ 4759.181863] usb-storage: device found at 4
[Code].....
On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?
View 5 Replies View RelatedI recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.
Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23
What have I missed?
Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
[Code] .....
I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:
- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot
No error messages because its a headless device - its just not booting up.
I was wondering if anyone can assist me. I am looking to build a server with Debian as the host. When I installed Debian (Squeeze) the default kernel was "2.6.32-3-trunk-amd64". When I tried to install 'Virtualbox' application, I got a failure because I didn't have the 'kernel-headers' installed on my machine. I noticed there are no specific header package the 'trunk' kernel I was using. I have a few questions so I guess I should begin:
Is it safe to remove the 'trunk' kernel and boot my system on just the regular 2.6.32-3-amd64 kernel? Is this OK or not recommended? Please explain whatever is the correct answer. This is my 1st time using a 'Trunk' kernel so I don't know the in's and out's of it.
If I am using Debian 'Testing' for virtualization via 'Vbox', is there a specific kernel I "should" be using?
I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:
View 1 Replies View RelatedMy girlfriend got a 'new' (second hand) laptop, a HP Compaq 6715s. When I tried to install Debian on it, the install went immensely slow - glacial, even. It was a very minimal install but it tooks hours to get to nowhere.
I found out online that this was because of a problem between the current kernel and the hard drive (or HD bus, something hardware-y to do with the disk) which meant file operations were extremely slow. I thought "easy, patiently install Debian and then install newer kernel". Except that after six hours, the install wasn't even halfway.
So I install Arch Linux with the 2.6.35 kernel: no problems with the drive speed at all. After a lot of researching (I only played around with Arch once, more than a year ago) I got the system into a usable state. But now wlan0 has suddenly disappeared, together with some other problems - and a usable laptop wasn't exactly what I had in mind, it was supposed to be awesome (or at least good). Which, with Debian, it would be
So... is it possible to make a Debian installation use a later version of a kernel? I'd want to install Debian with the 2.6.35 kernel, not install Debian and then afterwards update the kernel (because I don't have 24 hours to install an OS, if it'll ever even install).
I've found some stuff online but it might well have been written in the Cyrillic alphabet. All I understand, I think, is that in theory it's possible.
I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
Trying to compile the 2.6.36.2 kernel. Its not the first kernel I've compiled, but I've run into a problem I've not come accross before.
While compiling I get this error.
[Code]....
Looks like the headers sys/eventfd.h and linux/virtio_rng.h haven't been selected in my .config file. I just copied my old config from the last kernel I built. This was a while ago (2.6.30), but I thought I'd give it a go anyway.
what config option they are under or what I can do to get rid of this error?
This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies View RelatedI'm running testing, so yesterday I upgraded to the new kernel (2.6.38). Unluckly I can't get to the desktop, because the system just hangs (screen goes black then nothing happens). I have found that my problem is the radeon (open-source) driver. When the it tries to get to the desktop it enters an infinite loop, so the system hangs. The bug is better described here: [URL]. However, I don't know how to fix it. I would prefer not to go to the fglrx (proprietary) driver because of tearing issues.
View 14 Replies View RelatedFrom the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
I use Debian testing and when I run this
Code: Select alluname -a
I see these
Code: Select allLinux debian-mfaridi 4.2.0-1-amd64 #1 SMP Debian 4.2.1-2 (2015-09-27) x86_64 GNU/Linux
I have a system that was upgraded from Debian 7 to 8. Unfortunately it is not able to boot from the new kernel 3.16. Only the old 3.2 kernel is able to boot. I could transfer a backup, install it in Virtualbox, redo the upgrade and I can reproduce the error..The last error before "panic" is this line
Code: Select all 59.073579] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
Loading, please wait...
[ 59.226154] systemd-udevd[53]: starting version 215
[ 59.326564] random: systemd-udevd urandom read with 4 bits of entropy available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... /init: .: line 210: can't open '/scripts/init-premount/ORDER'
[ 59.552148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
The directory is indeed empty. I have reinstalled
Code: Select allapt-get install -reinstall initramfs-tools
and rerun initramfs
Code: Select allupdate-initramfs -c -u
I use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
I'm trying to install vmware server 2 on my lenny and first I must install the kernel headers but I'm having troubels with it.
apt-get install linux-headers-`uname -r`
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package linux-headers-2.6.28.9
I have even tried with apt-get install linux-headers-2.6.28.9 but same thing Searching apt-cache search linux-headers-2.6.28.9 shows nothing.