Debian Configuration :: Compile Custom Kernel Without Debugging Symbols
Aug 3, 2010
I've compiled 2.6.35 for my eeepc, but I have noticed that resulting .deb file is 30mb large. After investigating i saw that modules (and maybe kernel) are compiled with debugging symbols enabled.I've checked my lenny router and modules there are without debugging symbols.So stock 2.6.26 from lenny comes without debugging symbols and linux-image .deb file is around 20mb.Stock 2.6.32-5-686 from squeeze comes with debugging symbols enabled - linux-image .deb here is 26mb. (I have used 2.6.32's .config file to build my kernel, then i did make oldconfig.)I guess this is what increase my kernel size, but how to disable it?Or maybe enable stripping of debugging symbols.
View 3 Replies
ADVERTISEMENT
Apr 21, 2011
I would like to compile a custom xen dom0 kernel. I installed a Debian Squeeze with precompiled xen kernel, and it works fine, but i would like to compile a custom dom0 kernel from source. I tried install kernel source apt-get source linux-2.6 how can I patch this kernel source with xen? but i alway see only the domU kernel params.
View 3 Replies
View Related
May 3, 2011
When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:
1.) apt-get install linux-source-2.6.32
2.) mkdir ~/newkernel/
3.) cp /usr/src/linux-source-2.6.32.tar.bz2 ~/newkernel/
4.) cd /newkernel/
5.) tar xjf linux-source-2.6.32.tar.bz2
6.) cd linux-source-2.6.32
7.) cp /boot/config-$(uname -r) ./.config yes "" | make oldconfig
8.) change the driver file /newkernel/linux-source-2.6.32/drivers/gpu/drm/i915_drv.h manually
8.) make-kpkg clean
9.) make-kpkg --rootcmd fakeroot --initrd --revision=custom.001 kernel_image kernel_headers
10.) dpkg -i *.deb
Is this way OK or do I miss something?
View 14 Replies
View Related
Jun 22, 2011
I do not know if this is really something I should worry about. I am running Debian testing on my laptop (HP Pavillon dv6). Today, the aptitude update---aptitude upgrade gave me a new kernel (2.6.39). However, if I boot with that kernel, I get a warning (do not know if that is the way I should call this) telling me that the machine failed to get the i915 symbols so turbo graphics will be disabled.I have not done any serious test, but at first sight I do not notice any difference performance-wise with respect to the previous kernel. what am I supposed to do to fix this?
View 8 Replies
View Related
Jan 24, 2010
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies
View Related
Dec 16, 2010
Trying to compile the 2.6.36.2 kernel. Its not the first kernel I've compiled, but I've run into a problem I've not come accross before.
While compiling I get this error.
[Code]....
Looks like the headers sys/eventfd.h and linux/virtio_rng.h haven't been selected in my .config file. I just copied my old config from the last kernel I built. This was a while ago (2.6.30), but I thought I'd give it a go anyway.
what config option they are under or what I can do to get rid of this error?
View 2 Replies
View Related
Mar 11, 2016
I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is
Code:
Select all$ uname -r
3.18.12
But I'm not able to install this version from the standard repository.
Code:
Select all# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package)
nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64
linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support
Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?
View 5 Replies
View Related
May 19, 2011
I have squeeze and I've created my own custum kernel. Howto configure grub 2 to boot with this custom kernel automaticaly?
View 5 Replies
View Related
Sep 1, 2010
I am using the Debian stock kernel. I want a minimal kernel that works on my Pentium 4, 1GB DDR RAM machine. What do I have do to get a less resource hungry OS. Is there already a minimal kernel binary available?
View 2 Replies
View Related
Dec 25, 2010
Could someone give a step-by-step tutorial on how to do this, for someone with no more than a basic understanding of navigating the OS?
I'd like to include architecture specific flags instead of the generic i686 ones if possible.
So far, my tests have revealed that Arch Linux runs faster than Debian several media apps. I initially thought this was due to the i686 optimization of Arch, but other mentioned it could simply be a kernel timer issue.
I know for a fact the differences aren't due to bloat, and I've installed both OSes from minimal install means. Only the absolutely needed dependencies have been installed.
View 11 Replies
View Related
Oct 19, 2010
I'm running gdb across a network using gdb server. I've got it up and running. However I can't see any source or variables for my code (in ddd /gdb). At start up gdb says (no debugging symbols found). I've got a g in my make file,
CPFLAGS = -Wall -Os -g -pedantic
I've tried loading symbols in using "symbol-file testarm", this sort of works in that I can view symbols but not names, e.g. if I ask dd to show x y and z, rather than
x = 10
y = 20
x = 30
It says:
display
10/20/30
Also ddd does not show anything in the source window, is there a way I can get it to show this? I think it's because I've started ddd with ddd arm-linux-gdb, as I'm calling a crosscompiler gdb. So can I tell ddd to point to the correct folders? What commands I need to set in gdb/ddd to view variable names (it's hard to keep track when it bunches them all together) and how to view my source code.
View 2 Replies
View Related
Aug 17, 2011
I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.
My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg
over
CONCURRENCY_LEVEL=4 make-kpkg --initrd --revision=123x kernel_image?
Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!
View 1 Replies
View Related
May 5, 2011
I compile kernel with i686 architecture but I get linux-image-2.6.33.9-libre12.6.33.9-rt31_2.6.33.9-libre12.6.33.9-rt31-10.00.Custom_i386.deb. How I can do it ?
View 6 Replies
View Related
May 21, 2011
I' d like to apply this patch into my squeeze: [URL] Can someone pls explain howto apply driver diff patch into a custom kernel?
View 9 Replies
View Related
Jan 6, 2011
I wasn't sure where to put this so if I need to move it just let me know.I have a strange problem that I cannot figure out. When I use gdb to debug our rpm-installed program, it says (no debugging symbols found) when it loads. Thing is, when I use nm on the program it can print the symbols, and even stranger is if I use gdb on the program before it is packed up by rpmbuild it loads the debug symbols just fine.Our program is built via the standard make using:GS=-g -Wall-pedantic and as I mentioned I can debug the resulting program. After the build, I package it up using:
cmd="rpmbuild -v -bb ptsnmp.spec --define "ver ${cmvc_release}" --define "rel ${cmvc_level}" --define "_topdir $rpmdir""When this package is installed via rpm, the binary on the machine shows all the debug info via nm, file shows it is not stripped:pt_snmp: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.6.9, dynamically linked (uses shared libs), for GNU/Linux 2.6.9, not strippedyet when I try to debug it I get the no debugging symbols found.This is really taxing my brain and I am sure I am just missing something
View 4 Replies
View Related
Dec 17, 2010
This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.
View 4 Replies
View Related
May 28, 2010
I've about 5.5GB of free space....whenever I try to compile the kernel my system runs out of space...says zero bytes remaining maybe I din't configure it that well I cant exactly figure out which drivers/modules I need in order to obtain a working kernel.
View 8 Replies
View Related
Feb 24, 2010
Is there a way to set up a custom keyboard layout? (ex: set q to the f key, etc.) I have looked around, but have been unable to find one.
If there isn't one, then a (basically) equivalent solution for me would be to map some of the symbols I need (ex: Δx,Σ,ect.) to ctrl-/,ctrl-., ect. through keyboard shortcuts. The problem I run into here is that I do not know of any commands that paste a specific symbol into the focused text input area. Does anyone know of one?
View 3 Replies
View Related
Feb 23, 2010
I been trying all day to compile a kernel i downloaded from http://www.kernel.org/ (2.6.32.8 )Following this help thread viewtopic.php?t=4468.When i invoke make xconfig i'm just kinda lost at that point. Not really sure what to do, so i just save it as is and then compile/install.when i try to boot the kernel, a kernel panic happens saying it can't not mount the root partition.So i am sure i am missing a step with the xconfig part but not sure what.
View 5 Replies
View Related
Aug 4, 2015
On macbook air 6.2, i've installed a Debian jessie mate DE, dual boot using refind. I'm currently fine-tuning it. I've made a script following powertop advice:
Code: Select all[newb@debian /etc/systemd/system]$ cat mba_kb_sp.sh
#!/bin/sh
echo 'auto' > '/sys/bus/usb/devices/1-3.1/power/control';
echo 'auto' > '/sys/bus/usb/devices/1-3.2/power/control';
echo 'auto' > '/sys/bus/usb/devices/1-5/power/control';
exit 0
[Code] ....
All seems to work fine, however when i check the sys file it didn't change. But I can start manually the systemd service and, this time, it works.
View 2 Replies
View Related
Feb 24, 2016
I'd like to create my own custom Debian live CD — the idea being to have my own rescue CD with my favorite Debian tools installed. I read about bootcd and was going to give that a try, after creating the ideal system in a qemu virtual machine.
How much exactly can you install on a system so that bootcd can still fit it on a CD? I'm presuming there is some kind of compression involved. When I tried to create my VM, I coudln't get Jessie + LXDE to install onto a 2GB virtual drive (net install) so naturally I'm wondering what I'm going to be able to put on a 700MB CD.
View 7 Replies
View Related
May 1, 2011
I'd like to create a custom squeeze kernel. Is it a really bad idea to edit to edit the kernel config file directly instead of using "make config", "make menuconfig" or "make gconfig"? My problem is I missing a search function, for example in "make menuconfig" and cannot find some entries.
View 2 Replies
View Related
Sep 26, 2010
I've setup my own repository which I want to use SSH as the protocol. I managed to get everything working with an SSH key using port 22. Now, I would like to change the SSH port. I've already changed it on the SSH/repo server. Now I can't figure out how to change apt to use a custom port on the client computer.
My sources.list file line which worked over port 22: deb ssh://user@1.1.1.1/home/user/repo lenny main contrib non-free I've tried: deb ssh://user@1.1.1.1:12345/home/user/repo lenny main contrib non-free and it fails and actually says "failed connecting to port 22"
Can this be done? I've searched google for hours and I getting nothing but unrelated data. I've read the man pages. The man page for apt.conf specified that you can set the port this way for HTTP, but doesn't mention anything about ssh ports.
View 1 Replies
View Related
Jul 2, 2011
I want to build my own binary package that replaces several from the repositories.But then whenever I install something that depends on libffado2, aptitude wants to uninstall mypkg and install libffado2. Why doesn't Provides work here?
View 3 Replies
View Related
Aug 13, 2011
My university has a secure wireless network that has the following specs: WPA2, 1st Authentication TTLS, 2nd Authentication PAP, Encryption CCMP or AES, Thawte_Premium_Server_CA certificate and username and password.
I have never gotten this to work with wicd. First of all, wicd does not have a default template for this configuration. This led me in the past to quickly install Network-Manager (on top of XFCE...). While this has worked for me just fine. Recently I found out that this functionality is possible in wicd by creating your own template. So I did and here it is!
name = WPA2 Enterprise TTLS
author = Andres Cimmarusti
version = 1
[code]....
I did everything outlined here: [URL] (that is I saved the file as wpa2-ttls and then added this entry to the active file in /etc/wicd/encryption/templates/).
Sadly wicd's gui does not load my template!, the logs show no errors!...it simply refuses to take it. I cannot see any mistake in the above... do you?Is this some debian bug perhaps?This is the most important issue for me, before accepting to use wicd instead of NM.
View 1 Replies
View Related
Jan 2, 2016
I'm using a custom kernel but the Intel Broadwell GPU hangs and gives the following error messages:
Code: Select allJan 2 19:24:06 debian kernel: [ 34.734460] [drm] stuck on render ring
Jan 2 19:24:06 debian kernel: [ 34.735563] [drm] GPU HANG: ecode 8:0:0x85dffffb, in Xorg [1925], reason: Ring hung, action: reset
Jan 2 19:24:06 debian kernel: [ 34.735566] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[Code]....
View 4 Replies
View Related
May 7, 2011
I'd like to change the existing kernel module (driver) file and compile a custom kernel.
Is this the correct way:
View 9 Replies
View Related
Mar 11, 2010
I compiled a 2 custom kernels so far (many custom kernels just 2 that I have used) however, both of the kernels display an error message about EXT3-Fs and unable to load custom options even though all my partitions are ext4.
I have looked around and the only reason I find for those are that the file systems are corrupt beyond repair,However the problems always ments EXT3-fs is a ext3 file system problem and EXT4-fs is a ext4 file system poblem. Why is mine saying EXT3 and some times EXT2 when im using EXT4?
Custom Kernels
Debian 2.6.26.Something with RT patch
Debian 2.6.33 with Rt patch
View 5 Replies
View Related
Nov 9, 2015
I want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.
View 5 Replies
View Related
Aug 16, 2010
I want to build a custom system and I need your opinions. I have an old laptop which I want to configure as a system for troubleshooting purpose, my idea is to have multi-boot system with multiple root file systems, e.g. one root file system has only BIND to work as DNS server, another root file system has only Samba, etc., and I can choose which system to boot into from grub, or a custom menu after booting grub.
I thought of setting multiple partitions and install a full system on each one, but I thought that there might be a better way to do this, I'd like to hear your opinions.
View 2 Replies
View Related
