Debian Configuration :: New Kernel Cannot Start ?
Sep 10, 2010I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:
View 1 Replies
ADVERTISEMENT
Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?
Jan 24, 2010I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedDebian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel
May 13, 2011I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedDebian Configuration :: Nvidia Kernel Module With Custom Kernel
Jan 24, 2010I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedDebian Configuration :: Squeeze D-u - Kernel Configuration Skipped
Jul 6, 2010I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
Debian Configuration :: Save To Install Kernel 2.6.35.2 On Debian Lenny 5.0.5 Or Stick With Automatic Updates
Aug 20, 2010is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies View RelatedDebian Configuration :: Need Kernel Between 2.6.26 And 2.6.32
Dec 7, 2010On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?
View 5 Replies View RelatedDebian Configuration :: Can't Start Ubuntu LXC
Jan 30, 2016I can't start a Ubuntu 14.04 Trusty LXC on Debian 8 Jessie host. I keep getting this error.
lxc-start 1454188100.777 ERROR lxc_cgfs - Could not find writable mount point for cgroup hierarchy 8 while trying to create cgroup.
lxc-start 1454188100.777 ERROR lxc_start - failed creating cgroups
lxc-start 1454188100.777 ERROR lxc_start - failed to spawn 'rosxubuntu'
lxc-start 1454188100.777 ERROR lxc_start_ui - The container failed to start.
lxc-start 1454188100.777 ERROR lxc_start_ui - Additional information can be obtained by setting the --logfile and --logpriority options.
Debian Configuration :: Add New AMD PCI-IDs To Kernel Module
Jul 9, 2015I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
Debian Configuration :: Kernel Not Updating To 3.16
Jul 26, 2015Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.
Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23
What have I missed?
Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
[Code] .....
Debian Configuration :: Kernel Upgrade 2.6 -> 3.16
Sep 24, 2015I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:
- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot
No error messages because its a headless device - its just not booting up.
Debian Configuration :: Kernel For Virtualization ?
Apr 12, 2010I was wondering if anyone can assist me. I am looking to build a server with Debian as the host. When I installed Debian (Squeeze) the default kernel was "2.6.32-3-trunk-amd64". When I tried to install 'Virtualbox' application, I got a failure because I didn't have the 'kernel-headers' installed on my machine. I noticed there are no specific header package the 'trunk' kernel I was using. I have a few questions so I guess I should begin:
Is it safe to remove the 'trunk' kernel and boot my system on just the regular 2.6.32-3-amd64 kernel? Is this OK or not recommended? Please explain whatever is the correct answer. This is my 1st time using a 'Trunk' kernel so I don't know the in's and out's of it.
If I am using Debian 'Testing' for virtualization via 'Vbox', is there a specific kernel I "should" be using?
Debian Configuration :: Installing With A Later Kernel ?
Sep 10, 2010My girlfriend got a 'new' (second hand) laptop, a HP Compaq 6715s. When I tried to install Debian on it, the install went immensely slow - glacial, even. It was a very minimal install but it tooks hours to get to nowhere.
I found out online that this was because of a problem between the current kernel and the hard drive (or HD bus, something hardware-y to do with the disk) which meant file operations were extremely slow. I thought "easy, patiently install Debian and then install newer kernel". Except that after six hours, the install wasn't even halfway.
So I install Arch Linux with the 2.6.35 kernel: no problems with the drive speed at all. After a lot of researching (I only played around with Arch once, more than a year ago) I got the system into a usable state. But now wlan0 has suddenly disappeared, together with some other problems - and a usable laptop wasn't exactly what I had in mind, it was supposed to be awesome (or at least good). Which, with Debian, it would be
So... is it possible to make a Debian installation use a later version of a kernel? I'd want to install Debian with the 2.6.35 kernel, not install Debian and then afterwards update the kernel (because I don't have 24 hours to install an OS, if it'll ever even install).
I've found some stuff online but it might well have been written in the Cyrillic alphabet. All I understand, I think, is that in theory it's possible.
Debian Configuration :: Kernel BUG In Squeeze 2.6.32-5-686 ?
Oct 21, 2010I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.
The most interesting line from dmesg is:
Here is the full output from dmesg:
I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.
Debian Configuration :: Compile The 2.6.36.2 Kernel?
Dec 16, 2010Trying to compile the 2.6.36.2 kernel. Its not the first kernel I've compiled, but I've run into a problem I've not come accross before.
While compiling I get this error.
[Code]....
Looks like the headers sys/eventfd.h and linux/virtio_rng.h haven't been selected in my .config file. I just copied my old config from the last kernel I built. This was a while ago (2.6.30), but I thought I'd give it a go anyway.
what config option they are under or what I can do to get rid of this error?
Debian Configuration :: Kernel 2.6.38 In Wheezy?
Apr 11, 2011This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies View RelatedDebian Configuration :: Kernel 2.6.38 No Longer Available?
Apr 11, 2011This morning I upgraded two of my systems. The new 2.6.38 kernel fixed the missing pointer on the system that has an Intel video subsystem. Yay!
This afternoon I tried to upgrade my wife's systems. Aptitude is listing 2.6.32 as obsolete, but it isn't offering me 2.6.38. Was it withdrawn?
Debian Configuration :: Cannot Get To Desktop With Kernel 2.6.38
Apr 13, 2011I'm running testing, so yesterday I upgraded to the new kernel (2.6.38). Unluckly I can't get to the desktop, because the system just hangs (screen goes black then nothing happens). I have found that my problem is the radeon (open-source) driver. When the it tries to get to the desktop it enters an infinite loop, so the system hangs. The bug is better described here: [URL]. However, I don't know how to fix it. I would prefer not to go to the fglrx (proprietary) driver because of tearing issues.
View 14 Replies View RelatedDebian Configuration :: Start VPN Connection On Boot
Jul 18, 2015I am struggling to find out how to start the connection to my VPN on boot?
View 1 Replies View RelatedDebian Configuration :: How To Auto-start GUI As Root
Sep 28, 2015I have a "time-server". It's sending time to different devices through different ports/protocols. The problem is that it has no operator and that makes some extra difficulties.
Now when i try to start it using terminal Code: Select allsudo ./myprogram works fine and
Code: Select all./myprogram doesn't work.
It is so because without sudo i have no access to ports. As a result If i add my program to System->Preferences->Startup Applications it has the same problem. So i need to start it as root, auto-start, right after auto-login to system but without entering password cause nobody will do it.
Also I need to start ntpd but it also asks password sometimes I've tried googles but it offer a few ways with entering password that isn't suitable for me or writing some scripts/changing system files but with no example I'm afraid to break it all. So is there a way to start Myprogram and NTPD as root with no password entering?
My system is Debian 6.0.10 Squeeze, Kernel 2.6.32-5-686
Debian Configuration :: #couldn't Start The Xserver?
Mar 26, 2010im sure that my graphic card is good but after i installed the compiz manager ....the system failed to start the xserver this is the xserver output :
x.org x server 1.7.5
release date : 2010-02-16
x protocol version 11, revision 0
[code]....
Debian Configuration :: Start The Ssh Connection Between Both The Computers?
Apr 27, 2010I have installed GNU/Linux Debian on my computer (desktop) and i have ubuntu installed on my laptop. Now I want to start the ssh connection between both the computers. I want to make Debian as server and Ubuntu as client. Please can you guide me with this (installation and setup). Also the key values of the configuration file (ssh_config & sshd_config) are expected.
View 10 Replies View RelatedDebian Configuration :: Best Way To Start Script At Boot?
Apr 29, 2010I have a bash script that starts gammu, which I would like to start at bootup. But how do I accomplish this the best way ?
One way is to do it like this
Copy the file to /etc/init.d/
chmod +x the file
update-rc.d scriptfile start 20 2 3 4 5 . stop 20 0 1 6 .
But is there a better way ?
Debian Configuration :: Can't Start X - Repairing Permissions
May 29, 2011my ENTIRE hard drive now has user AND group permissions root. I can't start X and are having various permissions issues. although ive been using linux for a long time.
long story long, I did a debian netinst to my netbooks SSD. got everything EXACTLY as I wanted it, was very happy with my first go at debian but of course being a linux dork im always willing to tweak. I installed onto btrfs which I recently learned supports compression which not only saved precious SSD space (only 8GBs) but according to some benchmarks also improved performance. this was a boot option and would only start compressing new files. this, of course, could not be good enough. so I formatted my SD card btrfs, mounted it with compress option + my SSD defaults and copied over all files that weren't a mount (i.e. proc, dev, sys,...) however I forgot to copy permissions. so every file was copied with root:root ownership and I didn't realize this when booting to the SD card to verify things were working as I assumed ( never do this ) that getting to a login terminal was enough. So now I need to fix all permissions and I would really prefer it be without a clean install.
A netinst can take a dec amount of time and I had a lot of tweaking to do since I only used Xorg + i3 tiling wm. there has to be a way to fix this...I started trying to reinstall all the packages but kept running into issued where aptitude wasn't able to reinstall things like bash or perl-base, presumably bc they were in use or had incorrect permissions set
Debian Configuration :: 4.2.2 Security Update Of Kernel
Sep 9, 2015From the securing-debian-howto [URL] ...
"4.2.2 Security update of the kernel
First, make sure your kernel is being managed through the packaging system."
which suggests...
Code: Select all$ dpkg -S ‘readlink -f /vmlinuz‘
When I try to confirm by running the above, I get a lot of characters of output but the last line reads...
Code: Select alldpkg-query: no path found matching pattern /vmlinuz‘
How do I make sure my kernel is being managed through a packaging system?
Debian Configuration :: Uname -a Show Two Kernel
Oct 5, 2015I use Debian testing and when I run this
Code: Select alluname -a
I see these
Code: Select allLinux debian-mfaridi 4.2.0-1-amd64 #1 SMP Debian 4.2.1-2 (2015-09-27) x86_64 GNU/Linux
Debian Configuration :: Kernel Panic After Upgrade
Nov 2, 2015I have a system that was upgraded from Debian 7 to 8. Unfortunately it is not able to boot from the new kernel 3.16. Only the old 3.2 kernel is able to boot. I could transfer a backup, install it in Virtualbox, redo the upgrade and I can reproduce the error..The last error before "panic" is this line
Code: Select all 59.073579] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
Loading, please wait...
[ 59.226154] systemd-udevd[53]: starting version 215
[ 59.326564] random: systemd-udevd urandom read with 4 bits of entropy available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... /init: .: line 210: can't open '/scripts/init-premount/ORDER'
[ 59.552148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200
The directory is indeed empty. I have reinstalled
Code: Select allapt-get install -reinstall initramfs-tools
and rerun initramfs
Code: Select allupdate-initramfs -c -u
Debian Configuration :: No Sound After Upgrading To Kernel 4.4
Mar 22, 2016I use Debian Stretch (testing). After upgrading to kernel 4.4 the system doesn't see my main soundcard at all -- so, no sound. And now I also get this message every boot:
Code: Select allmodprobe: module microcode not found in modules.dep
Debian Configuration :: Installing Kernel 2.6.28.9 Headers?
Feb 3, 2010I'm trying to install vmware server 2 on my lenny and first I must install the kernel headers but I'm having troubels with it.
apt-get install linux-headers-`uname -r`
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package linux-headers-2.6.28.9
I have even tried with apt-get install linux-headers-2.6.28.9 but same thing Searching apt-cache search linux-headers-2.6.28.9 shows nothing.
Debian Configuration :: Getting Kernel Version In Stable?
Feb 10, 2010kernel with which most version number may be compiled in Debian 5 stable without updating to testing? 2.6.32.8 can't compile, if not turn off virtualization, since Documentation/least/least.c
contains
#include <sys/eventfd.h>
which is present in libc6-dev from testing, but is absent in stable.To drivers compiling kernel used own linux/eventfd.h.