Debian Configuration :: Compiling Bitlbee And Libpurple In Lenny 32bit?

Mar 15, 2011

I am using bitlbee 1.0.3 with ircII for a long time since etch is released. Mainly for MSN, Jabber, Yahoo, Sametime communications. But the old version lacks MSN offline message and sametime protocol support and the yahoo protocol doesn't work at all. Does anyone successful in compiling bitlbee and libpurple in lenny 32bit?

View 3 Replies


ADVERTISEMENT

Debian Configuration :: Compiling Squeeze Kernel On Lenny ?

Jul 30, 2010

I just wanted to know if i download Debian Squeeze linux-source-2.6.32 from packages.debian.org and try and compile it in debian lenny using lenny's packages will the build succeed ?

View 6 Replies View Related

Debian Multimedia :: No Video When Using Skype 2.1 Beta On Lenny (32bit)

Feb 28, 2011

I am using USB logitech webcam C510, tested it OK with luvcview. But when I use skype no video shows up on my screen, the cam is still on (LED turns on) and remote user see my face. I googled a lot and can't find a way to fix it.

View 7 Replies View Related

Debian :: Use The Bitlbee Public Servers?

Jun 26, 2010

Can someone post how to use irssi with bitlbee . I know how to use the Bitlbee public servers but I would rather install it and use it that way.

View 4 Replies View Related

Debian Configuration :: 8.0 With GNOME 32bit - WiFi Connection With WPA2

Apr 12, 2016

I'm using Debian 8 with GNOME 32bit. I installed a driver with ndiswrapper for my old D-Link DWL-G650M.

If i using the default network manager to connect with a Free wifi the connection works fine. But if the wifi have the password the connection doesn't work.

I. using my phone Android to create the Router-Wifi like this:

SSID: AndroidAP5
Password: BillyBob
Encryption(the one allowed): WPA2 PSK

With network manager gnome is impossible to connect. I changed in setting the password type with WPA2 but the system doesn't connect.

I tried to connect manually and i updated the file /etc/network/interfaces as the follow:

Code: Select allauto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid AndroidAP5
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk 18[...]

After this I tried to execute the follow command :

Code: Select all/etc/init.d/networking restart

And the system returns:

Code: Select all[  ok  ] Restarting networking (via systemctl): networking.service

but nothing else happens. The internet connection doesn't work. The Android phone not detect PC connection IN.

View 3 Replies View Related

Debian Configuration :: Disable Framebuffer After Squeeze 32bit Installation?

Apr 5, 2011

I'm installing a non-X server using squeeze 32bit netinst iso, expert installation. I don't know that I can specify "debian-installer/framebuffer=false" during the installation, after reboot I got a framebuffer display with console fonts smaller and fonts look like ubuntu. I search around I can edit GRUB config for the resolution items or disable framebuffer. How can I disable the framebuffer (use normal text system fonts) when booting in LILO?

I got everything installed and setuped, I don't want to re-install the OS again.

View 8 Replies View Related

Debian Configuration :: NVIDIA Driver 32bit Chroot On 64bit Host?

Mar 23, 2011

I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.

View 11 Replies View Related

Debian Configuration :: Strange - Running Php5 On Debian Lenny And Apache?

Jan 18, 2010

i do have a strange problem get running php5 on lenny 64 inside apache2. i had installed it as all instructions on the web does: # apt-get install php5 libapache2-mod-php5 php5-cli php5-common php5-cgi

apt has enabled php automatically, so
/etc/apache2/mods-enabled/php5.conf does have inside:
<ifmodule mod_php5.c>
AddType application/x-httpd-php .php .phtml .php3
AddType application/x-httpd-php-source .phps
</ifmodule>

[Code]...

View 3 Replies View Related

Debian Configuration :: Save To Install Kernel 2.6.35.2 On Debian Lenny 5.0.5 Or Stick With Automatic Updates

Aug 20, 2010

is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...

View 14 Replies View Related

Debian Configuration :: Adding Compex ReadyLink NIC To Debian Lenny?

Nov 4, 2010

I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).

lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-

1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)

I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-

ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device

[Code]...

View 1 Replies View Related

Debian Configuration :: Pxe Setup On Lenny

Feb 27, 2010

i am trying to get a pxe server working on a debian so other clients can boot off it. the problem has two parts.

1. getting the pxe working. so far the tftp part doesnt work. the client says tftp error. so i guess the dhcp portion is working, but theres something wrong with the /var/lib/tftpboot or the deamon config itself.
2. the other issue is that in the shop many system's have non-working disk drives. also many of them do not have a usb boot option in the bios. all i need to do is get the "bare" kernel file or grub(?) to boot over pxe and give me the ability to boot from a usb flash drive and load the rest of the linux files from there. my primary intention is NOT netinstall. although it wouldnt hurt. my intention is running a linux live usb on systems without bios usb boot support. ive read somewhere that a full pxe live boot requires nfs setup. i am asking for that, just so i can boot from a flash drive.

View 4 Replies View Related

Debian Configuration :: Lenny Will Not Boot With 2.6.30 Or .32

Mar 20, 2010

I have a lenny box:

Linux ulet 2.6.26-2-686-bigmem #1 SMP Tue Mar 9 18:01:52 UTC 2010 i686 GNU/Linux

In order to get a newer kernel that would recognize a linksys usb wifi adapter I got the advice to upgrade to a newer kernel - 2.6.30 or newer. Which I am able to get from backports.

But when I try with .30 or .32 my machine will not boot. I do have a raid, but it is only used for data files - I do not boot from it or have any system files on it.

First I get this error:

I have not resumed the machine so I have no idea what is going on. So I press ENTER:

View 14 Replies View Related

Debian Configuration :: Reinstall It As Per The The One On Lenny?

Apr 20, 2010

I managed to break my video4linux module rendering all my video devices useless, can anyone tell me how to reinstall it as per the the one on Lenny. I'm looking for the original one and not v4l2.

2.6.26-2-686 I have a presentation to do tonight and need it working for that.

View 3 Replies View Related

Debian Configuration :: Compiling A Kernel To Be X86_64

Aug 2, 2011

So I completely fail at making a kernel x86_64, used to make them fine for just x86 but I haven't a clue on how to make them specifically for 64-bit systems.

View 3 Replies View Related

General :: Compiling 32bit Programs - How To Set Arch Variable

May 21, 2011

I am new to Slackware and I am wondering how you set the ARCH variable. On the multilib wiki page it says:

"Rather than editing the script and change/remove CFLAGS definitions, you can set the ARCH to 'x86_64' and save yourself some time."

So from this I understand that they advise against editing the Slackbuild script. How do I set the ARCH variable on the command line or is it a configuration file I need to edit? I am running Slackware 13.1 64.

View 2 Replies View Related

CentOS 5 :: Compiling Program With 32bit GCC On 64bit Install

May 3, 2009

I've been trying to compile a small program on my 64bit Centos 5.3 but I need to compile it in 32bit mode. I've tried editing the make file and changing CC=gcc to CC='gcc -m32" and that doesn't work. I have also tried to use "make CC='gcc -m32' and that doesn't work either. It wont compile. Do I need to install something with yum to get 32bit compiler to work?

View 2 Replies View Related

Debian Configuration :: Wlan Really Slow Under Lenny

Jan 10, 2010

i use a telekom s100 set-top-box, which originally had a prism54 wlan-card. but wlan was very slow. but the driver was working well and it did not seem to be a configuration issue, so i assumed that its that card which is so slow. following i purchased a atheros based wlan-card which is working perfectly well with the ath5k driver of my linux kernel (2.6.26-1-686). but the connection is pretty bad anyway. i get max 300kb/s from pc to pc. as its the same with 3 different cards i tested in the s100 i assume it is a configuration issue? or might there be chipset or mini-pci-slot limitation?

when i check the connection with iwconfig the bitrate is somewhere between 1-54mb/s, rising to 54mb/s and then falls back to 1mb/s, rising to 54mb/s again, falling down, its an infinite loop. im using wpa_supplicant for the connection, but i don't think thats the malefactor. well, you never know .. i tried to set the bitrate with iwconfig wlan0 rate 54M but that ended in a disconnection ...

[Code].....

View 3 Replies View Related

Debian Configuration :: Lenny Or Sid As A Domain Controller?

Feb 18, 2010

Can Debian act as a Windows Domain Controller? I'm just curious because my boss recently tossed out some old servers and I grabbed them. They're good machines but I can't afford to pay $1000 for Server 2003 R2 just to setup a domain at my place and run Endpoint Protection and such. I've never used a domain setup in Linux before so I thought I'd ask and possibly try to, if Debian/Linux is capable of such a thing.

View 6 Replies View Related

Debian Configuration :: Deluge Installation On Lenny?

Feb 18, 2010

I have problem with installing Deluge. I did not find any manual how to install Deluge. And I wanna install deluge newest version, and that is on Debian testing packages. So how can I install Deluge from debian testing packages. I read a little bit Deluge forum and there I see, there is lot of problems with Deluge on Debian Lenny. And all I need is use Deluge from web interfaces, thats all. How could I set it up?

View 6 Replies View Related

Debian Configuration :: Configure The Postgresql In Lenny?

Mar 3, 2010

I've been trying to configure Postgresql in Debian for some time now, in order to install a ERP program in my computer, but when trying to follow the tutorial for the program configuration I end up stalled. Basically its says this:

1) under su, start by finding the postgresql.conf file (it points the location of the file in /var/lib/postgres/data, but it isn't there) and find the line saying 'tcpip_socket' and changing it to "true"

After a little search and help, I found this file in /etc/postgresql/<version>/main/ but the mentioned line is absent, locate it or tell me where to add it in the file? I've read the file front to back and I'm pretty sure the line isn't there.This is, according to the tutorial, to enable the server to connect to a Java program through the JDBC.

2) after editing postgresql.conf, edit pg_hba.conf and add the following line to the end of the file: host all all 127.0.0.1 255.255.255.255 trust

I get stuck after this, because I'm now supposed to restart the server by using '/etc/init.d/postgresql restart', but bash replies that the path is invalid. The program I'm trying to install is hosted here: [URL]. It's a portuguese ERP program.

View 3 Replies View Related

Debian Configuration :: Xen On Lenny Making Etch Vms?

Mar 16, 2010

Why is my Xen server (An up-to-date Lenny box) making Xen DomUs as Etch boxes? I run a command such as:

[Code]...

This is 100% replicable. I certainly never asked it to create an Etch VM! I cannot find anything in the docs to change this. And for the record, I did let it finish creating it, and it most definitely made an Etch box.

View 2 Replies View Related

Debian Configuration :: Lenny Won't Boot All The Way Without Monitor

Apr 16, 2010

I've got Lenny installed with the desktop environment included. Remote desktop has been activated and I can see Lenny's desktop on a second computer using VNC. When I disconnect the monitor from the first PC which is running on Lenny and start that one up it won't boot all the way and I cannot connect through VNC (connection refused).

Etch has no problem with that. When I connect a monitor to the stalling Lenny I read: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?

What can I do to establish a full boot on Lenny so I can use VNC the way Etch (and other distros) allows me to? This has something to do with the autodetect system, I suppose. Could I tell X Server to ignore the fact no monitor is connected or could I fool X Server into believing there is a monitor?

View 3 Replies View Related

Debian Configuration :: Where Does Lenny Keep Kernel Source?

Apr 30, 2010

I am using Lenny kernel version 2.6.26-2-686.I am trying to install some drivers and they need kernel source. I installed kernel source through Synaptic, but the driver installer doesn't find it at the place it expects.

1) Where does Lenny keep the kernel source?
2) Are the kernel sources from Debian and www.kernel.org the same?
3) If I want to download the kernel source manually, where do I get it from?

View 7 Replies View Related

Debian Configuration :: Lenny Cannot Survive Reboot

May 9, 2010

If I reboot my machine, the interface is down. How do I set the interface so it will start after I rebooted the machine?How do I do it in Debian?

View 3 Replies View Related

Debian Configuration :: Install A Package From Sid On Lenny?

May 11, 2010

however I am not looking to dist-upgrade, I merely want one package from Sid on my Lenny server. Namely, mantis (version 1.1.8 is in sid, 1.1.6 in main/stable)

View 2 Replies View Related

Debian Configuration :: Installing MySQL 5.1 In Lenny

May 17, 2010

I've been trying to install MySQL in Lenny via source binaries, following the instructions given on the MySQL official website[url]

But when i try to run the scripts/mysql_install_db --user=mysql command, doesn't work.

For the record, i'm particularly interested on installing MySQL with the generic source binaries.

View 1 Replies View Related

Debian Configuration :: No Sshd On Startup (lenny)?

May 30, 2010

I tried recompiling a new kernel yesterday (2.6.34) on my debian sarge box, but I ran into multiple difficulties. These difficulties forced me to do a double dist-upgrade to lenny. The new kernel was (seemingly) compiled without any hiccups, and I ran dpkg -i on both the image and the header debs. They didn't install properly into grub, but I think I managed to fix that manually.Next thing I did was rebooting the server. It refused to come back up. Luckily my ISP has recovery tools, so I managed to switch back to the old kernel. It boots just fine with that kernel, but the problem is that there is no ssh daemon running! I can access it through ftp and do limited jobs through php, but nothing big, as I have no root access.Now, enough backstory. My question is: How can I install openssh-server onto the server remotely? I cannot access the server personally, as the server is in a completely different country.

View 14 Replies View Related

Debian Configuration :: Enable The Sound In Lenny?

Jun 30, 2010

I'm using Debian Lenny, the only problem that I have is that the sound card isn't recognize by the system, I have installed ALSA 1.0.20 and I followed several tutorials trying to enable my sound card (ATI tech Azalia (Intel HDA)but all tries fail.

So, after install another distro -debian based- in the same pc I figured out that the sound card is enable and running by default, the ALSA version is the same -1.0.20- but the kernel is different -2.6.31.xx- so my questions are:

1. do you recommend me to upgrade my lenny's kernel to fix the problem?

2. is there a way to upgrade specific packages -for example samba, alsa, kernel- using unstable or testing versions instead of upgrade the entire distro? actually I'm confortable with lenny

3. what configuration should I check in the "other" distro to use that parameters in lenny?

View 14 Replies View Related

Debian Configuration :: GCC Not Working In Fresh Lenny

Aug 13, 2010

I just did a regular install of debian lenny on a stand-alone machine. Now I want to add some new mp3-software. Debian doesn't like it if I install as root. A regular gets other negative results:

wlff@debian:~/My_Apps/mpg321-0.2.12-1$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... no
checking for gawk... (cached) mawk
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
wlff@debian:~/My_Apps/mpg321-0.2.12-1$

I did find the GNU-compiler in /usr/lib/gcc. So what could be wrong with gcc, and what about gawk, cc and cl?

View 6 Replies View Related

Debian Configuration :: Disable IPV6 In Lenny?

Sep 25, 2010

Howto disable IPV6 in Lenny?

I added this line:alias ipv6 off in /etc/modprobe.d/aliases:# cat /etc/modprobe.d/aliases

# These are the standard aliases for devices and kernel drivers.
# This file does not need to be modified.
#
# Please file a bug against module-init-tools if a package needs a entry
# in this file.

[Code]....

alias ipv6 offbut howto check after restart if ipv6 was loaded or not?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved