Debian Configuration :: 8.0 Jessie Can't Log In With SSH Anymore

Jan 11, 2016

I installed Debian Jessie on my Hummingbaord. I use it with apache, owncloud and minidlna but after some days i rebooted the system and then i can't log in with SSH anymore.

The message I get:

Access denied
Using keyboard-interactive authentication.
Password:

And this again and again, although I enter the right password. If I login directly on the Hummingboard all works normally...

View 6 Replies


ADVERTISEMENT

Debian Configuration :: Cannot SSH Tunnel Anymore

Oct 25, 2015

Unfortunately I have followed a misleading guide to set ssh and scp in order not to supply password everytime and...I messed up my ssh/scp settings as it does not work anymore.Well, in my attempt:

I moved to
Code: Select allcd ~/.ssh
then I created a rsa key
Code: Select allssh-keygen -t rsa

without giving any passphrase.Then

Code: Select allcat id_rsa.pub >> authorized_keys
chmod 600 authorized_keys

Then I tried tunnelling and...it didn't work. So, ok, I tried to recover previous settings erasing all the items in the folder ~/ .ssh/. After I tried copying a file with the "usual" command that used to work before (i.e. scp file user-id@server) and...I've found out it does not work anymore!

I get this error message:
ssh_exchange_identification: Connection closed by remote host

View 5 Replies View Related

Debian Configuration :: Jessie - How To See What DNS Servers Are Actually In Use

Sep 24, 2015

I am running Jessie 8.2, upgraded from Wheezy about a week ago.

KDE Desktop, static IP
NetworkManager.conf shows:
[main]
plugins=ifupdown,keyfile

[ifupdown]
managed=true
dns=none

The dns=none is to keep NetworkManager from overwriting /etc/resolv.conf (which shows):

nameserver aaa.bbb.ccc.ddd
nameserver aaa.eee.fff.ggg
nameserver aaa.hhh.iii.jjj
search mydomain.com

It seems like ifconfig used to show which DNS servers were being addressed, but something has changed, I need to know whether I am referencing what I think I am... I have search this forum, googled, and come up empty... did the metrics go away with 8.2? Was I dreaming at 7.5?

View 10 Replies View Related

Debian Configuration :: Can't Get Started From Grub Anymore

May 2, 2011

Installed Debian 6 last night after using Ubuntu for close to 3 years. Couldn't believe how wonderful everything was put together and working, with some minor beginning glitches (like nvidea 3D drivers not working) which were to be expected.

But now I'm sitting back in Ubuntu because I can't get Debian started from Grub anymore. The Grub menu is still there and the selections work fine too. I honestly have no idea what caused this. Last thing I was doing in Debian took place in the Software Center where I was installing some GTK+ themes and looking for some general utilities. I did find a Boot Logo/Login changer, at least that's what I think it was, and when I clicked on install ... I received a message that that application was already installed (must have been by default or through synaptic perhaps).

Anyway, as soon as that message cleared out, perhaps 2 or 3 seconds later the screen crashed and everything went black ... I'm assuming that the xerver crashed. Did a CTRL, ALT, DEL which successfully restarted the system. Got back to the grub menu, selected Debian, and got the black screen again with a login for a user, followed by the password request. Knowing next to nothing about Debian I was obviously stuck at that point. Then I tried the recovery console, and exactly the same thing happened.

Rebooted again, got back into the recovery console, and this time, after adding my user name and password, used CTRL + D which caused a ton of text to appear on the black screen. Near the end of it came a FAILURE message ...

Startpar: service(s) returned failure: gdomap failed:

View 5 Replies View Related

Debian Configuration :: Java Uses High CPU In Jessie

Jun 24, 2015

I have a relative fresh install of jessie in which I face a high cpu usage of java (top shows about 165% CPU and 12% MEM). The problem occurs right after booting the computer. These values stay constantly high for days if I leave the box running. This happens even if the computer is just sitting there without doing anything.

I have to kill java to go back to normal. So, when I do a
Code: Select allkillall -KILL java
the problem goes away. After that it doesn't reappear and I can use all apps installed without a problem.

Currently I am based on openjdk
Code: Select allupdate-alternatives --display java
java - auto mode
  link currently points to /usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java
/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java - priority 1071
  slave java.1.gz: /usr/lib/jvm/java-7-openjdk-amd64/jre/man/man1/java.1.gz
Current 'best' version is '/usr/lib/jvm/java-7-openjdk-amd64/jre/bin/java'.

But I have also tried the SUN version with the same result.

Where to look to find more information on what exactly java app is using so much resources and how I can solve it? I guess I could just put somewhere in rc.d a kill java command and forget about it but I would really like to find out whats going on...

View 2 Replies View Related

Debian Configuration :: Fsck On Boot Jessie 8.1

Jun 25, 2015

I use debian jessie 8.1 and when i boot it, pc start fsck block clean etc.. but the fsck control is activated every on boot?

View 14 Replies View Related

Debian Configuration :: How To Get Boot Log On Jessie / Stretch

Oct 14, 2015

When i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.

View 4 Replies View Related

Debian Configuration :: Kernel Modules Won't Load Anymore

Jul 7, 2015

After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.

The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode

Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.

...Then several drives show up as clean....

Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented

And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.

After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules

...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.

"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux

I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.

Regarding the module-loading features, running "lsmod" shows about 30 lines:

Module
ext3
mbcache
jbd
dm_mod
usbhid
hid

[Code] ....

...I'm at the limit of what I know to check and/or try.

View 1 Replies View Related

Debian :: How Does One Bring Up The Gpsd Configuration Dialog With Jessie

Jun 5, 2015

Configuring gpsd with Wheezy was a breeze. Just had to run "sudo dpkg-reconfigure gpsd", answer a few questions, and it worked like a charm. With Debian Jessie the following happens:

tsi@sxf-tsi:~$ sudo dpkg-reconfigure gpsd
Warning: Stopping gpsd.service, but it can still be activated by:
gpsd.socket
Creating/updating gpsd user account...
tsi@sxf-tsi:~$

How does one bring up the gpsd configuration dialog with Jessie?

View 1 Replies View Related

Debian Configuration :: Jessie - Service Samba Restart

Oct 20, 2014

I've after latest jessie update a problem with service samba restart. If I use "service samba restart", there is a timeout (after long time) and error.

Output of "systemctl status samba.service":

Code:
Select all● samba.service - LSB: ensure Samba daemons are started (nmbd and smbd)
   Loaded: loaded (/etc/init.d/samba)
   Active: failed (Result: timeout) since Mo 2014-10-20 02:16:57 CEST; 7s ago
  Process: 6205 ExecStart=/etc/init.d/samba start (code=killed, signal=TERM)

Okt 20 02:16:57 server systemd[1]: samba.service start operation timed out. Terminating.
Okt 20 02:16:57 server systemd[1]: Failed to start LSB: ensure Samba daemons are started (nmbd and smbd).

[Code] ....

Whats going wrong. "service samba restart" should bring no error message if the service is not running previously.

View 2 Replies View Related

Debian Configuration :: How To Config Touchpad On Jessie In Gnome3

Jun 20, 2015

I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.

I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.

etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?

View 2 Replies View Related

Debian Configuration :: Apt-get Auto-remove After Installing Jessie

Jun 20, 2015

After installing Jessie, apt-get gives me a huge list of packages with the suggestion to autoremove them. Now, I've tried auto-remove once and was left with a naked Gnome, so I was wondering if there's another way to find out which packages I should keep and which I can safely remove. Is it safe to delete packages that cannot be found using the search function for the stable release? I checked them one by one here URL....How about linux images that won't appear in the above search?

linux-image-3.14-0.bpo.1-amd64
linux-image-3.14-0.bpo.2-amd64
linux-image-3.16-0.bpo.2-amd64
linux-image-3.16-0.bpo.3-amd64
linux-image-3.2.0-4-amd64

How about results shown by deborphan?

View 9 Replies View Related

Debian Configuration :: Jessie Will Not Reboot On Remote Server

Jun 27, 2015

Upgraded webserver to Jessie as an upgrade to Wheezy produced errors, and before reboot everything was up and running, but as all upgrade docs and info I read, I rebooted the server. However it never came back. I have the original backup files before I did the Wheezy upgrade. I also have access by Rescue to the server.Made a back up of critical files and have a 24GB tar file and I can connect by SFTP.

how to check the Debian files... Grub etc.. I would prefer to find the issue than start again.I am not able to sudo from Putty. I cannot run apt-get update. I did go to chroot, but then I get unable to resolve host errors and Could not open lock file because Permission denied errors and asking if I am root.There is information by googling for start up issues, but as I am working remotely with a Rescue set up, a lot of the commands I see and have tied do not work.

View 3 Replies View Related

Debian Configuration :: Jessie WD Disk Mount Fail

Aug 20, 2015

A few days ago I upgraded from debian 7 to 8. First I update, upgrade and dist upgrade - change source list and again update, upgrade and dist upgrade.When inserting a USB disk on key, it works okay. When plugging my WD "My passport" backup USB disk it does not work. The automatic mount works, but the disk can be accessed.I tried to do it manually in a format that worked on debian 7..Manual mount fails too.

umount My passport
fdisk -l (to see device name)
mount -t vfat -o rw /dev/sdb1 /media/kuku/usb_mp4
dmesg | tail
[ 2381.080822] sd 9:0:0:0: [sdb] No Caching mode page found
[ 2381.080828] sd 9:0:0:0: [sdb] Assuming drive cache: write through

[code]....

View 2 Replies View Related

Debian Configuration :: Jessie Xrandr Rotation Bad Corruption

Nov 25, 2015

DE: lxde
version: Jessie
using xorg file: no

After changing my video cards from gigabyte HD5450 and saphire X550 to two saphire r7 240s one of my debian installs no longer supports rotating the monitors either with 'Monitor Settings' or xrandr. The only difference between these 2 Jessie installs is that one was upgraded and the other one was fresh. The problem is with the upgraded one. On the fresh installed debian I just put the ati proprietary driver so I won't do further testing on it but xrandr was working fine on it before that.

I tried going over the ATIHowTo [URL] .... and everything looks good. Tried purging the non free firmware and reinstalling. I verified the version numbers of libxrandr2 and kernel of both installs. It is either some scrap left over from wheezy or a configuration file I am not aware of.

So what actually happens is xrandr does not say anything, blanks out all windows on the screen with only their background color and title bar showing, changes the lxpanel to its background pattern except for 2 blanked out boxes almost to the right of the screen( I have 10 tray icons there before it blanks), activates the screen I wanted to rotate with the proper rotation. On my main screen I can't click on anything. On the rotated screen I can right click and I get my openbox right click menu like I do on my main monitor before the command but when I try to run something nothing happens. The only way I can get out of this situation is to go to ctrl-alt-f1, log in as root and type 'service lightdm restart'.

Both of these monitors are connected to the primary video card, an ati r7 240 saphire. The main one is on vga and the other one is on DVI. I also have another monitor connected to HDMI but it's not being used. I have yet another monitor connected to the VGA of the secondary GPU I don't think it's a problem is it? I tried not using 'xrandr --setprovideroutputsource 1 0' and it still did the same thing.

I tried just launching openbox with no LXDE and it did the same thing.

Also another strange thing is when I stop the lightdm service and try to 'startx' or 'xinit' my screens go blank; numlock, control-alt-delete and control-alt-f1 do nothing and the only thing I can do is an emergency REISUB. I didn't configure this install to use startx or xinit yet but should it really lock up my system?

On the affected system my script looks like this (I already did this step by step and the 'rotate left' line is causing the problem):

Code: Select allxrandr --setprovideroutputsource 1 0
xrandr --output VGA-0 --primary --mode 1680x1050 --pos 0x0 --rotate normal
 --output DVI-0 --mode 1680x1050 --pos 0x1050 --rotate left
 --output HDMI-0 --off
 --output VGA-1-1 --off

lxpanelctl restart

Additional info:

Code: Select all$ inxi -G
Graphics:  Card-1: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
           Card-2: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
           Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1680x1050@59.88hz, 1680x1050@59.95hz
           GLX Renderer: Gallium 0.4 on AMD OLAND GLX Version: 3.0 Mesa 10.3.2

[Code] .....

View 14 Replies View Related

Debian Configuration :: Jessie With XFCE - Service Fails

Feb 10, 2016

I am using Jessie with XFCE and I tried to write a service which executes a script to change my wallpaper. When I try to start the service with systemctl start wallpaper.service it fails and I get the outout below from systemctl status wallpaper.service

I don't think it to be a permissions issue, they are -rw- r-- r--

This service is called by a timer that goes off daily. Below is wallpaper.service

View 5 Replies View Related

Debian Configuration :: Slower Than Usual Boot In Jessie

Feb 22, 2016

I've recently noted that the boot process in my Jessie installation is occasionally taking longer than usual, not dramatically as in "really hanging", but still noticeably slower, during which some messages are printed along the lines of

Code: Select alla starting job is running (2 of 5) and also after that, once lightdm (I'm using the MATE desktop) comes up the screen gets painted slower as well.

Unfortunately, once the system is up and running there's no longer trace in the logs (either traditional syslogs or journalctl) of such messages, however what comes to mind is that I've just recently enabled persistent logging in systemd: could this be the reason of such (occasional) slower boot process?

Other than that, what else could cause such behaviour? What should I eventually check to ensure things are OK?

View 11 Replies View Related

Debian Configuration :: How To Load Own Kernel-module (KO) In Jessie

Mar 14, 2016

I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type

Code: Select allsudo modprobe 8821au

I get a

Code: Select allmodprobe: FATAL: Module 8821au not found..

But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:

Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko

it seems to work:

Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.

But lsmod doesn't show me the module after that.

I also added

Code: Select all./kernel/drivers/edimax/8821au.ko

to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.

So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.

View 3 Replies View Related

Debian Configuration :: Jessie Missing Fan Control / Sensor

Apr 27, 2016

My laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work

sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  (crit = +108.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Physical id 0:  +55.0°C  (high = +87.0°C, crit = +105.0°C)
Core 0:         +55.0°C  (high = +87.0°C, crit = +105.0°C)
Core 1:         +54.0°C  (high = +87.0°C, crit = +105.0°C)

[Code] ....

I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax

This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.

View 9 Replies View Related

Debian Configuration :: Stylus Button Not Working Anymore After An Upgrade?

May 18, 2010

after today's upgrade, my Wacom stylus button stopped working.My xorg.conf is as follows:

Section "ServerLayout"
Identifier"X.org Configured"
Screen"Screen0" 0 0

[code]....

View 3 Replies View Related

Debian Configuration :: Jessie After Dist-upgrade / Password Not Working

Jul 13, 2015

updated my jessie by apt-get dist-upgrade and there was an error said there was something wrong with some database, and I needed to run some command, but after the upgrade I forgot to run the command. After I rebooted my system I found there was not any password needed for a normal user or the root. But if I change to the emergency mode, a root password is needed.

View 4 Replies View Related

Debian Configuration :: RAID1 On Jessie - Unable To Boot From Second Drive

Jul 28, 2015

Recently tried to make RAID1 on MBR partitions scheme on Debian Jessie - debian-8.1.0-amd64-DVD-1. The issue - I have unable to boot from second drive after grub-install /dev/sdb by any ways. RAID1 itself for / swap and home is fully functional. Decided to try the same thing on GPT, same story. How to boot from second drive on most recent Debian Branches?

View 9 Replies View Related

Debian Configuration :: Jessie Wmii - Another Window Manager Is Already Running

Aug 1, 2015

I installed jessie 8.1 and wmii ( Version: 3.10~20120413+hg2813-8) and I use a basic wmiirc.

Code: Select all:~/.wmii-3.10$ ls -la wmiirc
-rwxr-xr-x 1 root root 8033 août   1 17:28 wmiirc

If I want to run wmii the system says:Code: Select all:~$ wmii

wmii: fatal: another window manager is already running

Some information :

Code: Select all~$ update-alternatives --config x-window-manager
Il existe 3 choix pour l'alternative x-window-manager (qui fournit /usr/bin/x-window-manager).

  Sélection   Chemin             Priorité  État
------------------------------------------------------------
  0            /usr/bin/wmii       60        mode automatique
  1            /usr/bin/metacity   60        mode manuel
  2            /usr/bin/mutter     60        mode manuel
* 3            /usr/bin/wmii       60        mode manuel

View 3 Replies View Related

Debian Configuration :: Jessie Nvidia-settings Multiple Monitors

Aug 30, 2015

I've always used Debian with a single monitor and no need of proprietary drivers, because I usually don't do graphics or multimedia. Now I'm asked to set-up a machine with 3 nvidia video cards (770) and 4 monitors and everything went south. I started with just 2 monitors connected to 2 different video cards, not wanting to push my luck.

I installed a fresh Jessie and followed the instruction to install the nvidia drivers and tools from the Wiki. Everything went smooth. After reboot I executed (as root) nvidia-settings and I configured the two monitors to be one to the right to the other, with BaseMosaic option (at this point just one monitor was active) I saved the configuration to /etc/X11/xorg.conf , I even executed nvidia-xconfig as suggested, I rebooted and nothing happened, only one monitor was working, while the other -- looking again in the nvidia settings -- was still disabled.

I then tried with xinerama option and things are even worse, since now both monitors are black. I can login in one textual shell, but then I don't know what to do, since in my 10+ years of linux ... I never had to mess with X server. Is there a way to at least recover a working X without reinstalling everything?

View 0 Replies View Related

Debian Configuration :: Jessie Upgrade Broke NTFS Drive

Sep 22, 2015

I had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .

So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)

I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.

When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'

When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"

Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.

Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.

I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"

View 2 Replies View Related

Debian Configuration :: Update-initramfs Fails When Upgrading To Jessie

Oct 17, 2015

I'm just completing an upgrade from wheezy to jessie and get the following error

Code: Select allProcessing triggers for initramfs-tools (0.120) ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-amd64
E: intel-microcode: unsupported kernel version!

With a message like this I'm wondering if it's safe to reboot as well as how to resolve.

Is this somehow related to the change to only update the microcode on boot as reported earlier in the upgrade?

Code: Select allintel-microcode: microcode will be updated at next boot

View 5 Replies View Related

Debian Configuration :: WYSIWYG Editor For Elog Not Working In Jessie

Oct 21, 2015

I installed elog 2.9.2+2014.05.11git44800a72 on my Jessie system. When entering a new post just a simple plain text editing box is shown instead of the WYSIWYG editor, and no drag and drop area for attachments is shown. When I start the elog service with "systemctl start elog" I get this suspect message in the journal: "FCKedit NOT detected".

Indeed, I see that the elog installation creates a symlink which I guess is supposed to point to the fckeditor installation, which nevertheless is missing:

Code: Select allroot@static-3-080:/usr/share/elog/scripts# ll fckeditor
lrwxrwxrwx 1 root root 15 Oct 25  2014 fckeditor -> ../../fckeditor
root@static-3-080:/usr/share/elog/scripts# ll ../../fckeditor
ls: cannot access ../../fckeditor: No such file or directory

I installed ckeditor 4.4.4+dfsg1-3 but his did not fix the problem. I'd say that either the elog package is broken or that it misses a dependency on a package providing FCKedit. Or maybe my system is misconfigured?

View 0 Replies View Related

Debian Configuration :: Jessie Upgrade Ssh Command Line Reboot

Nov 13, 2015

I've upgraded a server on our LAN from fully functioning Wheezy to Jessie. All seems fine except remote administering using Putty from my windows workstation when issuing reboot from command line, it goes down and reboots but stops at login prompt asking for username and password and does not come back on the LAN network. This server does not normally have a monitor or keyboard so my ability to remote admin this server in effect is disabled.

If I log on, it will come back on the LAN network. I've checked the logs but can't see any errors. Is it in the configuration of Jessie somewhere or perhaps a Grub issue. I have 5 other production Wheezy servers that I intend to update to Jessie once I understand how to deal with this problem.

View 4 Replies View Related

Debian Configuration :: Jessie 8.2 - GUI Update-manager XFCE Notifier

Jan 1, 2016

Since update-manager was removed from Debian Jessie, I am looking for something similar or a way to install update-manager for 8.2. I would like a GUI.

I have tried gnome-packagekit, but some of the commands don't appear to work or it seems incomplete and I don't know of a way to test to make sure that it is working.

Other sites recommended to use smartpm. However, I cannot seem to find the plugin xfce4-smartpm-plugin in [Xfce Goodies] that would work as a notifier.

Unattended-upgrades does not meet my specifications, because to my knowledge there is no GUI configuration for this.

Though Debian Jessie is a great distro, I am finding it difficult to recommend to some newer users because it does lack a GUI updater/notifier at this time.

View 5 Replies View Related

Debian Configuration :: Samba Denies Login After Upgrade To Jessie

Jan 2, 2016

I just upgraded to jessie and now Samba won't let me log in anymore. I merged smb.conf manually. It now looks like this (removed comments):

Code: Select all[global]
   workgroup = WORKGROUP
   dns proxy = no
   bind interfaces only = no
   log file = /var/log/samba/log.%m
   max log size = 1000
   syslog = 0

[Code] .....

With smbclient logs as follows:
Code: Select allsmbclient -L 192...

Enter user's password:
session setup failed: NT_STATUS_UNSUCCESSFUL

If I provide a wrong password, it raises NT_STATUS_LOGON_FAILURE, also if retry with the correct password.

Not sure about what resolved the issue. But after I purged samba, reconfigured it, added the users AND set www-data's shell to bash again (which was changed during the update), it now seems to work

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved