Debian :: System Stuck On GRUB Message And Rescue Mode Not Worked
Jan 23, 2016
It happened when I updated my php5.4 to 5.5 version on my small Debian 7 server. I am only getting GRUB right after BIOS boot pass, then none of the keys working even C or Shift buttons to go to command promt except CTRL+ALT+DEL.
I have tried rescue mode with live CD, selected myserver/root/ partition to install GRUB but not worked.
How to recover my server, I have some important data in it and I don`t want to destroy them.
View 8 Replies
ADVERTISEMENT
Apr 28, 2011
my computer is currently stuck in "Grub Rescue mode" I don't know how to get it unlocked. I tried installing the latest ubuntu from wubi after I deleted the partition for 11.04 beta I had already had (I had some issues with 11.04 so I went to windows (it's a dual boot machine) and cleared the partition) After I got rid of ubuntu from there I don't think it automaticlly got rid of grub, which I was unaware of. So I continued to go through Wubi for to install 11.04 side by side Windows and to be used with the windows loader.
After I got thorugh all of that stuff I was instructed to restart my computer (as usual) and I did. But as soon as my computer came back on it came into "grub rescue>" with the error message at the very top of the screen "error: no such partition." I am currently using a different PC to type this. I would like to know how to get out of the rescue loader and at least back into windows (I have windows 7). I don't care to much if I can make it into Ubuntu as I have most of my more important files on Windows. I'm kinda scared atm, because I read somewhere earlier that I can't really do anything unless I have the windows boot disc, which I don't.
View 5 Replies
View Related
Jan 10, 2015
I thought I'd have a go at putting back sysvinit to run the start up daemons, after I discovered that upgrading to jessie removed it and slapped on systemd.
I didn't have any problems at all with systemd, infact it was pure speed at start-up, but after some reading I thought I'd like to go back to usual start-up scripts.
What I did was to boot a Live Debian and mount and chroot into my Debian system, then I ran
Code: Select allsudo apt-get remove --purge --auto-remove systemd
sudo apt-get install sysvinit-core sysvinit sysvinit-utils
On reboot, I hit a grub rescue prompt which says error: file not found.
Trying the methods to get that sorted out gets stuck with "unknown file system" after I use ls and ls(hd1,msdos2) -as well as other combinations - it only seems to work for a plugged in flash drive.
Then I chroot again and run update-grub and grub-install /dev/sdb but reboot still stops at grub rescue.
So I wonder, firstly, why replacing systemd mucked up grub. Then, besides re-install of systemd, how do I get a booting system?
View 5 Replies
View Related
Jun 18, 2010
I installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies
View Related
Jul 18, 2010
Today it happened again: After an apparently trivial update Grub (Grub2) enters rescue mode the next time booting, not displaying any useful help whatsoever at that point. (Remember that at boot time no manual or help pages are available.) I don't know what went wrong, but ... The harddisk or partition in question is now no longer a bootable partition.
I don't want to use much time trying to sort out things, so unless someone may direct me to at better procedure, I am going to save whatever can be saved from the hd and then reinstall debian (in this case: Sqeeze) from scratch. Nothing else has in my experience ever worked before.
View 6 Replies
View Related
Jul 20, 2010
I have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
View 1 Replies
View Related
Nov 26, 2010
I lost power during my Ubuntu update and when I powered back up ubuntu was broken. Now the stupid bit. My hdd was partitioned into 3 bits, vista os, data, and ubuntu. In vista I deleted the ubuntu part and merged it with the data part. Now when I power up my computer it goes straight to a black screen that says...
error : no such partition.
grub rescue> I have looked through the forums for an answer to my problem but to no avail. When I put the ubuntu live cd in and turn back on itjust goes to the same screen. I'm a novice to the world of computers and need any help you can offer.
View 2 Replies
View Related
Feb 18, 2012
My system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found
Entering rescue mode...
grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
View 12 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Feb 2, 2011
I was dual-booting XP and Ubuntu 10.10 for a while, but as I never used Ubuntu it was just taking up space, so I figured I'd get rid of it. I used a partitioning tool from inside XP to remove the Ubuntu partition, forgetting that I used GRUB2 every time I booted to select which OS to load. Now when I start my computer I get stuck at the "grub rescue>" screen.After searching for solutions to this problem all of them said to either use the Windows XP CD to fix the Master Boot Record or reinstall Ubuntu, but I dont have my XP CD and there isnt enough room on my hard drive anymore for a Ubuntu install. Is there anything else I can do to fix this?
View 5 Replies
View Related
May 6, 2011
I have tried to follow the different possibilites discussed here [URL]
But I am not getting anywhere.
Btw, this is not my screenshot. Mine shows GNU GRUB version 1.98-1ubuntu5.
View 9 Replies
View Related
May 26, 2011
Deleted the Ubuntu partition by accident. Now at a loss as how to get Windows working again. I had all my files saved, and did a full format and reinstall to Windows. Thinking that it would just overwrite grub but this thing is like a virus.. I cant do **** at the grub rescure command prompt... it just sits there with a cursor... Even stuff like reboot and quit or exit don't even work... what the hell? So I pop my Win7 install cd in and I find that for some reason I have no recovery console... just the option to install. I install but no grub, the little virus is still there and I just wasted an hour of my life while Win7 installed again because I still cant view it.
I deleted all the partitions and wiped the entire disc and grub is still there.. I was thinking that Windows would just replace grub automatically. Heh the Bootsector always seems to get owned on Windows and I expected grub to be just as useless but in it's own way, it's worse.
View 9 Replies
View Related
Jun 7, 2011
I recently partitioned my hard drive so that I could have Linux in addition to Windows Seven on my laptop. For some reason, at boot it it showed not only Linux, a Recovery mode for Linux, and a Windows 7 OS, but also a Windows Vista OS that I never installed. Yesterday, A friend of mine borrowed my computer and chose to open Vista. Since then my computer has been stuck at the grub rescue screen with nothing other than the message: error: no such partition grub rescue>
View 9 Replies
View Related
Feb 20, 2010
I accidently deleted my ubuntu partition, and when boot I get this message:GRUB loading.error:unknown filesystemgrub rescue>I can't get into my bios options either... I just see the MSI splash screen and it cuts right to this error message.
View 4 Replies
View Related
Jan 5, 2011
Dell Inspiron E1405 - 160 GB drive with 2 partitions - I think only 1 partition was used for windows and ubuntu Used wubi to install 10.04 - both XPP and 10.04 worked fine after repairing the XP install My boyfriend used Referencer (.reflib) in Ubuntu 10.04 to organize and tag about 900 documents. He spent around 9 hours on the project and its VERY IMPORTANT. I am a dumb ***, forgot the project was on the computer and updated to 10.10 via update manager without it backing up. Now I cant boot to XPP or Ubuntu - "error: no such device:", "grub rescue" My main concern is getting the data back. I would rather uninstall WUBI and install Ubuntu on the 2nd partition (wish I would have done this in the first place but 10.04 was my first Ubuntu install and I didn't know any better). I have to get this data back! I have tried the following and cant locate the referencer (.reflib) file or the .docs and .jpgs booted to USB using my 10.10 netbook remix USB install USB stick - I can see the windows files pulled the HD out and connected it to my Ubuntu netbook, an XPH and W7 computers -cant locate data
[Code]...
View 6 Replies
View Related
Dec 7, 2010
I have an Ubuntu 10.4 installation (dualboot with windows XP) with grub2.After I resized some of my partitions using a gparted live cd, the system goes directly to grub rescue mode every time I boot.Then I follow the instructions which are given in grub2 wiki site to boot.The grub boot directory is now located in sda6 (hd0,6) in my system as found out using 'ls' command.
But in the grub rescue mode when I enter the 'set' command (one of the very few commands available), to display current prefix and root, it gives "(hd0,7)/boot/grub" as 'prefix' and "hd0,7" as 'root'.After entering the following commands, I'm able to boot.There are other users at my home not familiar with ubuntu. windows is their OS of choice. So I don't want to remove windows installation .One solution that I can think of is creating a grub rescue CD using grub-mkrescue, then using windows cd to fix mbr (which will overwrite grub? or the pointer to grub?) and then using the grub rescue cd to boot into Ubuntu but I'm not sure.
View 5 Replies
View Related
Jun 30, 2011
I installed Fedora on my pc over Ubuntu and now Grub wont go any further than rescue mode. (Apparently grubs boot folder was on the Ubuntu partition. Now I see why a dedicated boot partition is handy.) I used VMware to install Fedora as im currently out of CDs. VMware is setup to use the Physical HDD for the primary HDD in the VM. (I made sure VMware disabled access to the windows partitions so the guest couldn't access them.)
I am in Windows 7 at the moment and am avoiding rebooting as that will basically lock me out of the only computer I have access to. I tried running the Ubuntu LiveCD to restore grub but dont know how to mount Fedoras LVM partitions. What can I do to repair grub or at least install an MBR that is capable of booting windows? I can boot floppies and cds using VMware but am not sure what to use to fix this.
Fedora LiveCD wont mount any of the partitions to install Grub
Ubuntu LiveCD may work if I can mount the LVM partitions.
View 9 Replies
View Related
Feb 23, 2011
I got my wife to try Linux, so we set her machine up to dual boot with Windows. After a few weeks, she decided not to use Linux, so we deleted the Linux partitions using Gparted on a USB drive and resized the NTFS partition, under the apparently mistaken impression that Grub would detect that there was now no other operating system. When we rebooted, we got error: no such partition, followed by a grub rescue prompt. I've never worked with Grub directly before, so I have no idea what to do at this point.
View 5 Replies
View Related
Feb 5, 2009
I'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies
View Related
Jun 23, 2010
Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies
View Related
Oct 25, 2010
I am fairly new to linux and my laptop froze so I rebooted it and now I have this error. I have tried to load the files needed using the prompt but nothing seems to work so here is my bootinfoscript thing. Any way for me to reinstall ubuntu over the sda5 partition but keep my files?
Code:
Boot Info Script 0.55 dated February 15th, 2010
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb .....
View 5 Replies
View Related
Sep 24, 2010
A few days ago I decided to try a linux OS for the first time. Following a how-to advice, I created a ~80gb partition (on a 320 gb sata disk) for Win7 and installed it. Then I installed Ubuntu 10.04, chose to make partitions manually, created a primary ext4-partition (right after the one with Win7) for / and a 1024mb swap partition. So now the disk is parted this way: 512 booter - Win7 system, ~ 80gb ntfs - Ubuntu /, 8 gb ext4 - Ubuntu 1 gb swap - file storage, ntfs ~240 gb (created using Win7 bootable disk, but the issue from below started before this).
After the installation the boot loader failed to load any system, giving the error from the topic title. I tried several ways to reinstall/repair/reconfigure grub in the live-CD mode. Some of them didn't change anything, others were not completed because of an update-grub error ("cannot find a device for / (is /dev mounted?)"). Grub version is 1.98b. The disk with Win7 and Ubuntu is treated as hd0 in grub and sdd in Ubuntu
ote: even though the thread is marked as SOLVED, the issue is actually not. I have managed to dual-boot Win7 and Ubuntu, but with partition configuration changes
View 14 Replies
View Related
Oct 23, 2010
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
View 1 Replies
View Related
Jun 19, 2010
converting from ubuntuinstall went okay but upon reboot I get: grub rescue > ls => (hd0) (hd0,1) ....root (fd0) => unknown command root
View 2 Replies
View Related
Jun 1, 2015
I have a brand new Z97-PRO (Wifi/USB3.1 version) that I got to replace a Gryphon Z87, and it was working great for the first day. I had my Debian and Windows drives both working, and I was working on getting GRUB reinstalled on the Debian drive in no time. At some point I needed to restore my Windows MBR for the millionth time, but this time was different. The Windows logo popped up and froze there. I know this is a thing that sometimes happens, but every other time since I replaced my Gryphon this process only lasted seconds. I let it sit for hours and it didn't move.
I then tried my Debian live USB, which loaded into the main menu, but upon selecting rescue mode it black screened and hung. This was an issue I experienced when I first got the board, but it seemed to work itself out after a few reboots and remained flawless until it just came back. At this point, I'm unable to get in to any of my OSes and I can't seem to successfully boot any external media in order to fix it. My BIOS is totally stock save for secure boot, which is set to Other OS, and memory in XMP mode. I also tried using an Ubuntu Live USB, but ended up hanging with the exact same Q-Codes as in Debian. I am running the system on 1 stick of RAM while testing.
Q-Codes at hang:
UEFI USB - AF (Exit Boot Services Event)
Regular USB - F6 (Reserved for future AMI progress codes)
Specs:
- 2 boot SSDs (OCZ for Windows, Kingston for Debian), 2 storage drives, and a DVD drive.
- The boot SSDs occupy SATA ports 1 & 2, the DVD drive takes up 3, and the storage drives take up 5 & 6
- i7 4770K, 32GB (8GBx4) Corsair Dominator RAM, GTX780Ti
- 750W Silverstone PSU
View 1 Replies
View Related
Sep 2, 2010
i had a fully working system (debian /stable) but now i have a weird initrd error and i cant boot.
my boyfriend used to repair all the problems remotely (from the other side of the earth ) i have but now he cant connect at the rescue mode.
View 1 Replies
View Related
Jul 9, 2011
I have a linux (dedicated) server on 1and1. Last night, the server crashed and now I'm only able to access it in rescue mode.
View 3 Replies
View Related
Jan 1, 2011
I've (attempted) to create a quad-boot on my MacBook Pro (if the specs are needed, its- 8gbs RAM, core i7, 500GB hard drive @ 7200 rpms, and its running the latest update of snow leopard). I have installed rEFIt and had installed Windows 7 as well as ubuntu 10.10. Everything was working great until I tried loading Linux Mint 10. Linux Mint got rid of Ubuntu in the rEFIt boot menu. I thought the added Linux Mint partition had just pushed out Ubuntu, so I deleted the Linux Mint partition, and re-sized the Macintosh HD. Now whenever I try to boot Windows 7 or Ubuntu, I get something along the lines of "invalid file system: Grub rescue" What do I do?
View 7 Replies
View Related
Apr 22, 2010
have installed warsow from synaptic & it's stuck in spectator mode.anyone know how to fix this so i can play?
View 1 Replies
View Related
Feb 21, 2016
I cloned my disk that have dual boot in it clone the disk remove the old one put the new one so far okay. But when i put with the new disk to linux it goes to the emergency mode:
run fstab and this is my fstab results:
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=cd9637db-0479-4ef0-90fd-481a50e23060 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=df29ffb9-91a8-48d7-91cd-5e671b55677d none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=696FF92C4C532245 /media/Windows ntfs defaults,x-gvfs-name=Windows,x-gvfs-icon=%2Fhome%2Fdarkangel%2FDownloads%2Fwindows_hdd_icon.png,x-gvfs-show 0 0
View 13 Replies
View Related
