Debian Configuration :: Squeeze New Installation / Cpu Running At 100% (even In Idle)

Apr 20, 2011

i've just installed squeeze on my lenovo t61 laptop. i've noticed one of my cpu's running at 100% (even in idle) from time to time.

View 3 Replies


ADVERTISEMENT

Debian Configuration :: Reboot Cycle Running 64bit Squeeze On Intel T3200 Dualcore

Mar 13, 2011

running Debian Squeeze (standard 32bit squeeze Kernels linux-image-2.6.32-5-486 and linux-image-2.6.32-5-686) happily without trouble on a 64bit capable Samsung laptop featuring an Intel T3200 Dualcore processor. However, when I try to boot using the squeeze 64bit kernel (linux-image-2.6.32-5-amd64) the system proceeds through a few text lines immediately after Grub, and then performs a warm start.

The text output I get immediately after Grub look similar to the ones I get booting the 486 and 686 kernels, without any indication for the reboot behavior. The rebooting also seems to happen before any entry is written into the boot/system log files (logging is enabled). This behavior also occured when I first tried to prime the machine from the Debian squeeze install CD using the amd64 kernel. I'm generally happy with the 32bit kernels, but I'd like to use the amd64 support to do some Java compatibility testing for 64bit architectures.

The Laptop is a Samsung R510-Aura T3200 Delfina with the following Hardware and Setup (using Grub as boot loader):

- Intel Pentium Dual CPU T3200 @ 2.00GHz (see http://ark.intel.com/Product.aspx?id=37160 for details)
- NVIDIA GeForce 9200M GS
- 3GB RAM + 1GB reserved for GeForce
- Konfiguration Details:
-- Phoenix Bios

[Code]....

Maybe a strange BIOS-Setting that works with the 32bit kernels but not with the 64bit kernel? I've seen a post on here that indicates someone is running the amd64 kernel on a T3200 successfully, and the chip is definitely 64bit capable, so the reboot behavior is a complete mystery for me

View 2 Replies View Related

Debian Configuration :: NFS Installation Failing In Squeeze On ARM (kirkwood)

Mar 22, 2011

I have trouble setting up NFS on Debian Squeeze (2.6.32-5-kirkwood armv5tel GNU/Linux) running on a Sheevaplug. After some digging and googling I found that the NFS server is (probably) not properly installed.

no rules in iptables or hosts.allow or hosts.deny. Fresh OS install.

apt-get install --reinstall nfs-kernel-server

generates this output:
Setting up nfs-kernel-server (1:1.2.2-4) ...
Stopping NFS kernel daemon: mountd nfsd.
Unexporting directories for NFS kernel daemon....
Exporting directories for NFS kernel daemon....

[Code]....

It could be related to this bug [URL] but I wonder if the fix goes to the arm-branch as well?

I have never had any trouble setting up NFS before.

View 2 Replies View Related

Debian Installation :: Squeeze On Eee PC From USB - No DEFAULT Or UI Configuration Directive Found

Sep 26, 2010

I get the following error message when attempting to boot: No DEFAULT or UI configuration directive found.

View 1 Replies View Related

Debian Configuration :: Disable Framebuffer After Squeeze 32bit Installation?

Apr 5, 2011

I'm installing a non-X server using squeeze 32bit netinst iso, expert installation. I don't know that I can specify "debian-installer/framebuffer=false" during the installation, after reboot I got a framebuffer display with console fonts smaller and fonts look like ubuntu. I search around I can edit GRUB config for the resolution items or disable framebuffer. How can I disable the framebuffer (use normal text system fonts) when booting in LILO?

I got everything installed and setuped, I don't want to re-install the OS again.

View 8 Replies View Related

General :: Debian Squeeze 6.0.1 Configuration Files Missing After Ssh Installation

Jun 3, 2011

I had installed ssh but something went wrong and I uninstalled it. I removed the SSH configuration files by hand (I deleted all /etc/ssh folder).After ssh installation (I mean apt-get install ssh) I noticed that I have no SSH configuration files.I tried apt-get install openssh-server but i still have no SSH configuration files.

View 2 Replies View Related

Debian Configuration :: 100% CPU Usage While Idle / Workaround It?

Apr 13, 2011

I just installed Debian 6.0 IA64 on my HP zx6000 and it pegs the CPU's when doing absolutely nothing but sitting at the desktop. I searched around on Google and found that there is a bug report: 537572. I was just wondering what the status was on that. Is there currently a fix or workaround?

zx6000 specs: 2 x 1.50GHz Intel Itanium 2 (Madison 6MB), 8GB of PC2100 ECC, 73GB 10kRPM SCSI, NVIDIA Quadro4 900 XGL 128MB.

View 8 Replies View Related

Debian Configuration :: Periodic Disk Activity With System Being Idle

Jan 12, 2011

I keep noticing disk activity every roughly 1 to 3 seconds even though there is "nothing" going on. Of course, I run a number of "system" and "user" application packages - Apache2, MySQL, Browsers (Opera, IceWeasel), an SMB client and server, OpenOffice 3.0RC8 being the most prominent ones. I wonder what might be the cause for this constant disk activity which happens even when none of the applications do any noticeable work at all. Is there a way to determine the process that does those disk read/writes?

View 6 Replies View Related

Fedora Installation :: GPU (Radeon 5750) Running At 69C Idle And Fan At Full Speed

Aug 19, 2011

I'm fairly new to fedora. I used Fedora 14 on a virtual machine just to mess around with it a little while back but thats about it. As far as linux goes, I just test a bunch but can never seem to pull myself away from windows. I am hoping this is the time but these issues are the weirdest I've seen on any linux distro ever. My GPU (Radeon 5750) is running at 69C idle and the fan is at full speed. I am not overclocking it at all and I'm using the default drivers that came with fedora. It works just fine in windows and a lot cooler. How can I fix this?

I'm running the Gnome 3 desktop version, which I am also getting some graphics artifacts. In the bottom bar I get a dashed white line that comes up every time I boot and goes away when I make the bar expand. Also in the applications window I get the same dashed line at the top of the window and sometimes the top of the scroll bar. So far I really like Gnome 3 (Idk why everyone is whining about it) and I'd like to stick with Fedora, and linux for that matter

View 9 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: TightVNC Configuration On The Squeeze?

Feb 8, 2011

I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:

Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280

[code]...

After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?

View 1 Replies View Related

Debian :: PS3 Running An .img Of Squeeze - Out Of Space

Feb 10, 2011

If you haven't heard, PS3's on custom firmware have access to a linux install of sorts.

The OS is running from an .img of a Debian squeeze install.

My problem is that installing anything makes it run out of space. (It's only a 1Gig image)

I have searched and found some info, but it doesn't seem to work.

Make sure you have loop module on your linux.

Now you can copy the linux.img to your root of usb stick...

AND...

Mount first the original 1gb linux.img and then copy it to somewhere and then create an bigger image and copy to the new image.

mount:

And then follow the how to above. i think you should copy the folder with rsync because cp command will damage folder permissions!

View 1 Replies View Related

Debian :: Deb Squeeze Running From USB-stick

Mar 8, 2011

I want to get a running Squeeze onto a bootable USB-stick to test it, to make desirable adaptions and adoptions and only when I feel, that everything is okay, install that over my existing Deb-installation.

The DVD however offers only an "install" over an existing Linux-system, destroying that. Really hours and hours of Google aso. brought no solution to a - in my opinion - simple task.

I want to transfer the content of the DVD onto the USB-stick, make that stick bootable and THEN enable me to act like the system on the stick were my real OS, including of course making changes to the configurations. Only when I'm satisfied with the result, I then want to overwrite my existing system.

View 2 Replies View Related

Debian :: Members Running Squeeze Or Sid ?

Jan 2, 2010

I got Squeeze installed to a partition and it runs pretty good

cept for one thing

live-helper/live-magic is broken in squeeze?

if I do

Code:

in term I get not found,etc

live-magic also conks out saying lh_config no such file,etc

So, my questions are

1) anyone running squeeze and use live-magic,etc is it broken?

2) thinking about upgrading to Sid anyone run Sid here and what advice?

View 9 Replies View Related

Debian Configuration :: Dropbox Install For Debian Squeeze From Source Code

Feb 19, 2011

how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.

View 7 Replies View Related

Debian Configuration :: Installed Firestarter Firewall On Debian Squeeze?

Apr 5, 2011

I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.

View 2 Replies View Related

Debian Configuration :: Using Tor In Squeeze?

Aug 28, 2011

When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".

I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.

What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.

View 2 Replies View Related

Debian :: Squeeze: Errors Running Upgrade

Nov 20, 2010

I've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround

View 3 Replies View Related

Debian Multimedia :: Running Squeeze - Give KDE A Try?

Jul 28, 2010

For many years I used KDE and loved it. After Ubuntu appeared and got popular I decided to give Gnome a try as I figured that it must be OK if they used it in Ubuntu (and selected as the default desktop in Debian). I missed out on all the wailing and gnashing that accompanied the release of early versions of KDE 4. I've been using Gnome ever since and I have a really nice setup on squeeze - Chrome for browsing, Geany for development, Gnote for notes, Evolution for offline Gmail and Google calendars.

In fact, it's probably because Gnome is working so well for me right now that the geek in me fancies having a bit of a tinker with KDE. I keep reading that version 4 has now matured enough for production use. The only thing that puts me off is the sheer number of packages I need to install. I'm going to end up with a right mess in my menus etc, but still it might be worth it. What do you reckon - should I just stick with my nice Gnome desktop or should I dip my toe back into KDE? (or go for l33t status and install Xfce) I've got a thinkpad T400 with integrated intel graphics.

View 14 Replies View Related

Debian :: Get Ssh Access To Home PC Which Is Running Squeeze?

Feb 15, 2011

what would be the best way to get ssh access to my home PC which is running Squeeze? I could think of openvpn...and I have a vps ready at my disposal.

View 8 Replies View Related

Debian :: Running KDE 4.x From Squeeze - Manual Install

Apr 21, 2011

I have recently installed Debian Squeeze on my main machine at home. I used the default installation options, which meant gnome was installed as the display manager/GUI. Once I got the system up and running, I have attempted to install the latest KDE display manager/GUI. I executed the following commands:

$sudo apt-get install kde4

and then responded as required when asked if I really wanted to get and install the huge list of programs this involved.

When booting up in runlevel 3, I would log in, and then execute the following command:

$ sudo kdm

the screen would go blank and I would eventually get a KDE error message saying:

"Cannot open theme file @@@ToBeReplacedByDesktopBase@@@"

I would then be given only the option to press OK, which would dump me back out to the command line. I can get the GUI to start by executing "Startx", which doesn't require sudo to run I might add. The problem is that this command starts gnome. I would like to start X from the command line, but be given a choice of either GNOME or KDE.

Question 1: How do I fix the issue which generates the error message detailed above?

Question 2: How do I set up X to ask me which display manager I would like to use? and

Question 3: Am I correct in assuming that KDM shouldn't require sudo to run? If so, how do I adjust the situation so that it is correctly configured to run like gnome (without requiring root access to run)?

View 5 Replies View Related

Debian :: Debian Squeeze - Apt-get Running By Itself In The Background

Nov 15, 2010

I am running Debian Squeeze, apt-get update runs by itself in the background, taking up 100% of one of the two processor cores.

I have kept the system updated.

Heres the output of

Code:

Code:

I have noticed this a couple of times now, i can kill the process and it doesn't show up again ( i haven't noticed it showing up till next reboot).

I don't have update manager to set to automatically install anything, I have set it to "Only notify about available updates".

View 9 Replies View Related

Debian Hardware :: Running GTX 580 Or Radeon 6970 On Squeeze?

Jan 27, 2011

I need to buy new grapics card for my system (because the old one died), but I can't decide which one should I buy. Anyone here got experience running GTX 580 or Radeon 6970 on Squeeze?

View 14 Replies View Related

Server :: Running Mini-httpd On Debian Squeeze

Jul 6, 2011

I have downloaded and installed a mini-httpd on my Debian 2.6.32 and its running on port 80.I have some webpages that I have stored in the /usr/share/mini-httpd/html directory.I am able to access those webpages from my machine(i.e.localhost).But I am unable to access it from another machine within the network.I have tried editing the iptables rules but in vain.The problem is,in my company we use a proxy server to browse the net and when I try to access the webpage on my machine from another system(by giving myipaddress/webpage.html),it shows the error message that proxy server is refusing any connections to the server.

View 1 Replies View Related

Debian Configuration :: ATI Driver For Squeeze

Feb 15, 2010

Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.

View 11 Replies View Related

Debian Configuration :: Downgrade From Sid To Squeeze

Jun 20, 2010

When I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.

View 2 Replies View Related

Debian Configuration :: NTFS In Squeeze?

Oct 19, 2010

Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.

View 14 Replies View Related

Debian Configuration :: Kernel BUG In Squeeze 2.6.32-5-686 ?

Oct 21, 2010

I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.

The most interesting line from dmesg is:

Here is the full output from dmesg:

I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.

View 8 Replies View Related

Debian Configuration :: Can't Hibernate On Squeeze

Dec 20, 2010

I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :

[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:

[Code]....

View 14 Replies View Related

Debian Configuration :: Squeeze And Php 5.3.x - Reverting To 5.2.x?

Feb 6, 2011

I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?

-rw-r--r--. 1 root root  2413316 May 11  2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root  2413290 Oct  6  2008 libapache2-

[code]...

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved