When I want to change my docroot in /home/Vincent/www or /home/Vincent/www/ it gaves me an.
:Syntax error on line 278 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
I googled it already and they sad that you have to type in:
chcon -R -h -t httpd_sys_content_t /home/Vincent/www << doesn't work so I tried also chcon -R -h -t httpd_sys_content_t /home/Vincent/www/ But nothing seems to work?
Vanilla install of Karmic (64 bit) - would like to change the Apache doc root to point to /home/sam/www as it's my web development machine. (Default install is working fine)
Created copy of 'default' to 'mylocal' in '/etc/apache2/sites-available'
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/sam/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /home/sam/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
...
The permissions on the folder in my home dir:
Code:
sam@rocket:~$ ls -la ww*
total 16
drwxrwxrwx 2 sam sam 4096 2010-01-09 22:26 .
drwx------ 35 sam sam 12288 2010-01-09 22:11 ..
-rwxrwxrwx 1 sam sam 100 2010-01-09 22:27 index.html
sam@rocket:~$ pwd
/home/sam
sam@rocket:~$
The sites enabled set up:
Code:
root@rocket:/etc/apache2# ls -la sites-enabled/
total 8
drwxr-xr-x 2 root root 4096 2010-01-09 22:24 .
drwxr-xr-x 7 root root 4096 2009-12-20 00:22 ..
lrwxrwxrwx 1 root root 26 2010-01-09 22:24 mylocal -> ../sites-available/mylocal
But I still get:
"Forbidden
You don't have permission to access / on this server".
My ISP Blocks port 80 so I changed the port to 8081 after I do this and restart Apache and use my IP with :8081 after I get a page saying Not Found The requested URL /index.html was not found on this server. I get this same message if I use my real IP or the IP from my router. What can be causing this?
View 2 Replies View RelatedI've run into some problems trying to change the default cgi folder from /var/www/cgi-bin to /var/www/cgi-local (in order to migrate scripts from a much older server to a new one). I have edited httpd.conf to modify the following:
Code:
ScriptAlias /cgi-bin/ "/var/www/cgi-local/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-local">
[Code]...
I have also tried several variations. I left ScriptAlias at the default "/var/www/cgi-bin" and I have tried it with AllowOverride None and without the +ExecCGI after Options. I am getting a 404 error when a form has an action directed at a cgi script that is in cgi-local.
I set up a website in my home directory, which works fine except running some .cgi scripts. the suexec.log shows this error message :
"cannot get docroot information (/home/weixi)"
does anybody have any suggestion what's wrong with it? I use Fedora 11.
I moved from F12 to F14, I've installed using yum Apache, MySql, php, phpMyAdmin. That all works fine, I've made index.php with phpinfo() function and if it is in /var/www/html/ it opens in web browser. I extracted daloradius-0.9-8 in /var/www/hmtl/daloradius folder changed ownership to apache:apache set alias to myradius. When I point web browser to localhost/myradius I get error 403, forbidden. I moved index.php with phpinfo() to daloradius (overwriting old index.php) and same stuff happens. Error 403. What am I doing wrong?
View 4 Replies View Relatedthe hard drive on my web server died so I replaced it and installed Fedora 15. I have been installing the OS on a small drive and then mounting other drive(s) for storage and did the same thing here. The problem is that I cannot get Apache to follow symlinks. Apache is partially working, it will serve my index.html page in the web page root directory and I made another directory called webtest and put some files in, and that worked fine. I made a symlink from the root directory to a folder on the mounted drive but when I try to access it, it gives me the old 403 Forbidden error. I also made a similar link in the webtest directory, I can view the other files in that directory but it does not show the link - also, trying to force it by typing the full path in the browser gives the same 403 error.
I have checked the permissions and SELinux types (using ls -Z) and they seem to be fine and I cannot find any .htaccess files. All the files on the mounted drive are owned by www:www but I also tried setting the user and group to www in httpd.conf and it still gave the same issue, so I changed them back to apache. I've been reading posts and sites on this for hours now and I'm still lost. I can post results of log files if they are of any use, I just wasn't sure what to post because it is somewhat working.
But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
View 3 Replies View RelatedI've had apache installed for a couple of years with no problem but this morning I thought I would change the apache document root to my secondary disk so that my WAMP setup in my Windows partition and LAMP could share the same files. I've edited the etc/apache2/sites-available file to point it to the new location of my document root but I am getting a 403 - forbidden "You don't have permission to access / on this server." error when I try to load files through the browser. I'm not sure if this is a permissions issue or the way I've edited the sites-available config.
Here is the new sites available config:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /media/Data/webroot
<Directory />
Options FollowSymLinks
AllowOverride None .....
Basically when I try execute a PHP script with SuexecUserGroup set, I get the following error:
uid: (501/uname) gid: (501/501) cmd: php-cgi
command not in docroot (/usr/bin/php-cgi)
Without SuexecUserGroup set, they work fine, but obviously aren't executed as the script's owner.
Here's one of the domain's configs:
Code:
<VirtualHost *:80>
ServerName www.domain
ServerAlias domain
[code]...
For a bit of background info, the end result i'm trying to achieve is for files that get uploaded via a php script to be owned by the user account that owns the script rather than by the apache user.
i ,musing mysql5 at fedora12 i have just installed it but i ,m using mysqladmin -p root password mypassword it says ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mysqladmin -uroot password 123456' at line 1
View 10 Replies View RelatedI am a Novell (now defunct) CNE tring to learn Linux and am having a lot of trouble finding out where the WB 6-6 is wrong in the syntax for adding local4... the the syslog-ng config file. In the instructions there are discrepancies between commas and simi-comma, they are both in the statements in no particular order. there is no pattern to them. Here is what the book shows:
filter f_local4debug { level(debug) and facility(local4); };
When I try to input this in the Gnome terminal window to try and find out where it goes wrong I get the following: -bash: syntax error near unexpected token "(" If I can get the correct syntax I belive I can use the info to get past the rest of this portion of the lesson. I am desperate to learn Linux as the only jobs out there for a Novell CNE are migrations to MS, which really sucks, since MS really really sucks.
I'm using a dark theme (Obsidian Coast) which is making things a pain to read using the default LaTeX syntax highlighting and color schema of Kate. I can edit the schema just fine, but that does not affect the colors of certain highlighting features, such as the color of expressions which fill in the ellipses of "section{...}", which turn out black or "egin{...}" which turn out dark blue.
Is there any way to fine-tune the highlighting features of a particular kind of markup (LaTeX in my case)?
I am not ready to upgrade my Fedora 13 to 14 yet, but I wanted to test some things in 14. So, using the live CD, I installed Fedora 14 under Virtualbox. But some things are not working and the Virtualbox Help files aren't helping. I have added my Fedora 13 /home/jjj/ folder as a shared folder with the name Home_jjj. The instructions say that in Fedora 14 I must mount it with "mount -t vboxsf share mount_point." So (as root in Fedora 14). I used the command "mount -t ext3 vboxsf Home_jjj /media" but I got an error message. I tried varying the command different ways, but haven't hit on the secret mount syntax. I would really just like to add it to Fedora 14's fstab file to make it auto-mount. I have an external monitor, which Fedora 13 sees, but Fedora 14 cannot see it. The main display for Fedora 13 is 1680x1050. Fedora 14 installed itself with 1024x768 as the max. I tried changing it with xrandr -s, but the only resolutions xrandr will take are 1024x788, 800x600 and 640x480. How can I make it at least, say, 1400x1050?
View 6 Replies View RelatedI don't know if this the right place to ask this question. If not excuse me.I installed apache server on my ubuntu and I've changed the www folder in etc/apache/.../default from /var/www to home/user/www but now i haveForbiddenYou don't have permission to access / on this server.
View 3 Replies View RelatedI wanted to log some messages on Apache. So I added in VirtualHost definition
Code:
CustomLog /var/log/apache2/site-resp_log resp
LogFormat "%{X-Forwarded-For} %D %t %T %v %O %b %A %B" resp
and restarted apache2.
I got following error
Code:
* Restarting web server apache2
Syntax error on line 33 of /etc/apache2/sites-enabled/site.com:
Unrecognized LogFormat directive % [fail]
root@server:/var/log/apache2# vi /etc/apache2/sites-available/sites.com
Here is a page I referred to. I am not able to understand the syntax error.
I am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
I am sure this information is out there somewhere, but Googling apache access.log and hostname does not give you any good leads... so I hope someone here might be able to provide me with a quick answer...I am setting up a cluster of web servers, so I would like to name the access.log and error.log with the hostname of the individual servers to be able to distinguish one from another.
View 4 Replies View RelatedI am trying a release of Ubuntu has have run into a problem that does not make much sense. I am receiving the following error: Syntax error on line 20 of /etc/apache2/sites-enabled/portal: Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration
fail! I believe the modules required for this is apt-get install libapache2-mod-proxy-html and it shows under the available modules and it was enabled with a2enmod proxy-html.
The line from the config is ProxyHTMLEnable On. The release is the latest download with updates from, 32bit.
Has anyone been able to successfully change MySQL's default datadir in Fedora? I've tried on two machines now (F7 and F11), but run into the same problem on both. Here is what I did:
1. shutdown MySQL (service mysqld stop)
2. create new mysql directory (e.g. ~/mysql/) and set ownership to mysql:mysql
3. move tables from /var/lib/mysql to the new directory (I've tried moving only one user-created table, and also moving system tables with same result).
4. edit my.cnf and change "datadir" to point to new location
5. start MySQL (service mysqld start)
[Code]...
I'm trying to create a new directory using the mkdir command.
Code:
home@ubuntu:~$ mkdir <aicoursework>
bash: syntax error near unexpected token `newline'
that's the error that i keep getting, what am i doing wrong?
The following problem occurs to me, I'm creating a distribution (as a class project) for my school (I'm studying telecommunications and computer systems). I am following, in order to create the distribution, the manual that you can find on this page: [URL] But when I get to write:
[Code]...
I am new to shell scripting, bash specifically.
I am trying to run the following script:
Code:
When trying to execute I always get this error:
Code:
In case you need to know the permissions. Here is it:
Code:
I run the script using the following command:
Code:
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
I installed fedora10 on my system with live cd.I started httpd service.I also set static IP address, subnetmask and default gateway as my proxy server.It is only accessible through http://localhost at the same machine.but I need to access it through http://ipaddress/ on my other LAN machines which has window operating system.
View 8 Replies View RelatedMy brother has Tri boot Ubuntu ,7 and Vista ..GRUB2 is the bootloader..The problem : At boot after the Lenovo splash disappears , there appears some 4 to 5 lines of error , error:syntax error GRUB or similar..This is visible only for a fraction of a second before the GRUB2 menu pops up...
The OS es load properly on selection in the menu so no loss of functionality One another problem is there is no OS highlighted by default and the timeout message "Automatic Boot in 10 Secs" does not appear Reinstalling GRUB does not solve the issue
I've installed a server (CentOS5.2) - and I need a new(er) PHP, so, I get me one. This is what I did:
- unzipped the bundle in the root's home
- of course, I entered the folder
- entered "./configure"
- entered "make" - the compile didn't come back with errors
- entered "make test" - there was a _possible_ fail...
- entered "make install"
I noticed there's nothing in the /libs, where I'd expect a module (lib5php5.so) to exist. there is one, but it belongs to the older PHP. It's located in ets/httpd/modules (a link BTW - but I think that's normal). At the console I type:
"which php" and get a path to PHP /usr/local/bin/php
"php --version" and get 5.2.8 and some extra info
in the server I entered "<?php phpinfo(); .>" in a PHP page, as I call that page, I get ... 5.1.6 as version.
Of course, I suspect Apache to have the OLD PHP in its config, (the old lib5php.so) and that I may have to overwrite the old one with the newly compiled one, if I had it. I ran a locate on the system, but no other lib5php.so files exist. Where did I loose track?
FedoraVersion 12 ConstantineNoyau Linux 2.6.31.12-174.2.3.fc.x86_64Gnome 2.28.2Memory 871.4 MoAMD Athlon LE-600Free disk 71.5GoSelinux is deactivated.Httpd doesnot start and, when I start "onfiguration des services", and click D�marrer, it runs for ever, but never starts Apache...
View 8 Replies View RelatedI have now blown Windows XP away completely and done a clean install into 80Gb hard disk (x86). I know that httpd is running and I've added the snippets to httpd.conf that output server status and server info to the web browser, so I can see that all the required PHP stuff is loaded. So something like http://localhost/server-info works fine but something like http://localhost/helloworld.htm produces the wrong output:
contents of helloworld.htm:
<?php>
print("hello world");
print(phpinfo());
<?>
[Code]....
I just installed FC 10 and have apache running with the default config. the problem is that it is only listening on ipv6 for ports 80 and 443
Code:
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:587 0.0.0.0:* LISTEN 2059/exim
tcp 0 0 0.0.0.0:465 0.0.0.0:* LISTEN 2059/exim
[code]....
here is the only part in the httpd.conf file that seems to have anything to do with this:
Code:
Listen 80
which from my understanding should make it listen on all interfaces, ipv4 and ipv6