I am stuck with 2.6.18-92.el5 kernel for a long time now. My centos doesn't want to load any other kernel. Seems like it doesn't read grub.conf file on reboot. Here is my grub.conf
[Code]....
I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.
View 5 Replies View RelatedI suffered a kernel crash today - then noticed a newer kernel was available, so I updated to it.However, it's since crashed again! Here's the message - can anyone tell me what's going on, is this a known issue or is it bad hardware?
general protection fault: 0000 [1] SMP
last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
CPU 2
[code]....
I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies View RelatedWhen i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI've used this video conferencing web app on Windows 7 and it works perfectly. [URL] But I'm having flash problems. Flash doesn't load and the light at my webcam doesn't switch on at all. Things to note:Cheese works so I know my webcam in Ubuntu is functional. I've tried purging the flash plugin and reinstalling it. It doesn't work on Chrome and Firefox so it's definitely only a flash problem. I'm not using any medication so I know it isn't me just imagining it. EDIT: I checked out [URL] Here's a screenshot: [URL] I'll check back later, Charlie the Unicorn just rang my doorbell and invited me to tea on the magic hot air balloon. Definitely not hallucinating. Definitely. Definitely.
View 9 Replies View RelatedI am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
Over the past few days I have been trying to install an older kernel (kernel 2.6.28.1) on ubuntu 9.10 64-bit WUBI installation. I compiled, installed, and updated my grub for the kernel. When I reboot, the grub menu correctly gives me the option of booting into the older kernel but when I do so I receive the following error message:
error: you need to load the linux kernel first.
I am at a complete loss on how to fix this. I even downgraded grub but I still get the same error.
I just took delivery of a new computer, with CentOS 5 installed. It does not have a PS/2 keyboard socket, only USB. I get lots of strange "key stuck" problems - usually the shift key or the cursor keys (I guess I use them the most). Or sometimes key presses do not register. It makes it very difficult to use the machine.I have tried two keyboards (both of which work fine on other machines, or on this machine when booted with a live CD). The machine is an Intel i7. Are there any known problems with USB keyboard drivers in CentOS?
View 4 Replies View RelatedSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
I'm about to compile a custom kernel using localmodconfig using the guide on this page. Everything's gone well but now I'm stuck. Can anyone work out what the syntax of the part in bold below is supposed to be? I have tried all combinations, e.g. linux-source-2.6.35-Myimage, and a few other permutations. Nothing seems to work.
Ubuntu kernels build with debugging information on, which makes the resulting kernel modules (*.ko files) much larger than they would otherwise be. To turn this off, go into the config's "Kernel hacking"<!-- ; then, under "Kernel debugging", --> and turn OFF "Compile the kernel with debug info".I've hit a few brick walls on the way but they turned out to be wet cardboard.
First off im very new to linux and have only been involved with linux for a couple days. Anyways, let me explain what i'm attempting todo. I want to make a DVD to automatically restore a partition without any human interaction other than inserting the dvd and turning the pc on. I'm using norton ghost 11.5 to restore the image and im using thinstation 2.2 as my OS.I have a cd that will boot up thinstation but then i would have to type in a command to have ghost start restoring the partition. so basically i figured i would put a script in the etc/init.d folder of initrd. so i extracted the contents of initrd using 7zip, put the script in the directory and then compressed initrd into .gz format. however now when i put the newly made dvd in i get stuck at "Booting the Kernel."
is this a problem with initrd format? if so what format does it need to be in and how to i get it into that format?is there some way to set the parameters of the kernel to fix this problem? and if so how do i go about doing that?
i'm using opensuse 11.3 and can't connect to the internet, my eth0 interface (which would be my modem i suppose) is found and when i "activate" it with ifup eth0, it gets stuck waiting for data (says so in ifstatus). If i try with knetworkmanager it is also stuck and doesn't connect to eth0. If i try to make it connect at boot, it doesn't work either.
I think the problem might be that in windows xp my modem has a "limited connection" but i can connect with my pppoe password anyway, but opensuse won't let me connect until it finds eth0 is working correctly which it never will because of how the internet company configures the modems i think. I don't know with which command i could "force" the pppoe connection even without a good connection to the modem, maybe that would work. But on the other hand, with other distros i can connect just fine so i don't know really.
I have currently installed the ubuntu 11.04 natty narwhal edition through the wubi installer alongside windows 7. I wanted to just check out what the kde environment had to offer differently from the default desktop environment which is gnome unity environment.
I installed the kde environment using some sudo command given by google. After using kde environment for a few hours, I just began to feel, I liked the default gnome environment better (in classic mode) as compared to kde as I was more used to the former.
So I uninstalled kde with another sudo command which I got by googling. At the final step of the uninstallation, I admit I am not sure whether what I did was right or wrong. There was sth related to 'daemon' that popped up eventually and I chose yes for that and kde was uninstalled successfully or atleast that's what I thought.
But to my horror, when i tried rebooting my laptop to ubuntu gnome, the blue coloured kubuntu logo was popping once again and I had to go back to the synaptic package manager and delete sth called the 'plymouth' package to remove the kubuntu logo.
Now after doing all these, when I tried booting ubuntu, I was not able to get to the gnome login screen. The screen was just stuck with the ubuntu logo and the process bar blinking and gnome never started.
When I pressed the Esc key to check out what was happening from behind, I could see that some processes were being checked and there was a [ok] after everything and there was a [FAIL] next to "starting CPU interrupts balancing daemon". And the terminal screen ended with "stopping system V run level compatibility". I am not sure if this might be the root cause of blocking the boot-up. But I couldn't get a screenshot of those intermittent terminal screens as I was not in a position to type in any commands such as fbgrab which can be used to grab a screenshot of the terminal screen.
Eventually after intense googling, I figured how to manually configure gnome to start up. I pressed the Cnt + Alt +F1 as soon as the white ubuntu logo popped up and after logging in into my ubuntu account through the terminal interface, I typed in the following things:
And then voila I got the gnome login screen. I temporarily heaved a sigh of relief. (by the way I saw something flash quickly on the terminal moments before it went to the gnome login screen like "you need not init this way or sth"..I just couldn't catch sight of it properly as it flashed only for a few moments)
But I am not satisfied. Obviously there might be a way to set this problem right isn't it? Kindly someone pls throw some light on this issue. I want gdm to be automatically activated during boot. Its a big pain to manually configure it everytime I boot. Is it possible to do a windows restore to set the ubuntu right? But I saw in some forums mention that something called the boot.ini will botch up if we perform a system restore in win 7.
Method that does not involve uninstalling ubuntu and reinstalling it. This is because I have done a lot of tweaks, optimisations and installed lot of apps in it. I do not have a system image backup as well. So it will be a nightmare to do all these things over and over again. The mistake or rather the drawback from my side is I just have my laptop alone and do not have another standalone desktop to experiment with linux.
Looking for an option to get Fedora working again, I followed Leighs guide to install the kernel nvidia driver. On Reboot however I am stuck a the Fedora splash.Is there a way when booting to disable splash, or enter in safe mode?I have an nvidia geforce 9 card and I used the non-PAE install.
View 6 Replies View RelatedI'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies View RelatedAfter installation of Fedora 11, I click reboot, it ejects out the disk, but is stuck at the screen for a long time and doesn't reboot so I manually had to reboot it. Today, surfing on firefox, it got frozen, and the touchpad worked, but everything was frozen nothing moved so I had to manually shut the laptop down. On bootup everything was ok. Im worried about corrupted files.Should I just reinstall Fedora 11? m using a dell studio 1555 laptop
View 4 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I am familiar with linux and have done some managing of servers before. I just tried to install centos 5.5 on a server, but after booting the screen was blank and my monitor said vga mode not supported. I found online to press ctrl+alt+F1, which allows me to see the rest of the boot commands. Then after I was able to see the boot commands it says enabling /etc/fstab swap, but never says ok or gets past that part.
View 2 Replies View RelatedI've found a number of other entries about this, but they don't apply (the config files mentioned do not exist or whatever). My RHEL 4.x systems work differently, so the solutions I used there don't help either.In the course of some fussing around trying to get Virtual Box OSE to load, I apparently stomped on something so that when I log in now, I get the twm window manager--I was perfectly willing to have Gnome or whatever, but twm is a bit too light-weight for what I need.Anyone know where the magic config file or whatever lives in RHEL/CentOS 5.x?
View 3 Replies View Relatedthe boot of my server is stuck at the message "GRUB"
I've allready tried :
chroot /mnt/sysimage
grub-install /dev/cciss/c0d0
but with no improvement. What else can I try?
I created a new Ubuntu 9.10 VM, and it installed fine. I then told it to upgrade, and was running it fullscreen and left it for several hours. Now the machine is stuck at full-screen, and Ctrl+Alt do not unstick it! I can see the mouse cursor, but cannot press Alt to bring up a menu or anything. I pressed Ctrl+Alt+F1 to get a console, and logged in as root and tried to kill-9 the process, (qemu-dm), but it won't die! Any ideas on how I can unstick the VM? I have lots of applications running and transferring data now, so I don't want to reboot the box for several days until the file transfers are done.
View 1 Replies View RelatedIve installed centos freebsd and mandriva but i want to manage grub from my centos and y create successfully a boot load for freebds. But for mandriva it just doesnt work... so how can a create a boot load entry for mandriva from grub centos?
View 1 Replies View RelatedI'm running Centos 2.6.18-53.1.13.el5 in a VM. Currently I'm studying for my RHCT.I'm trying to enable IP forwarding so I edited this line in the /etc/sysctl.conf:
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
Then I ran sysctl -p
[code]....
I managed to install Centos x86 for the first time, together with VncServer, SSH access, mySQL and Apache. Everything worked greater until I logged in remotely to the server from my Windows 7 machine using RealVnc. I manage to connect successfully and able to use the GUI remotely. However, when I press logout from the menu, the screen gets stuck on the funky blue and white curly background. It does not close automatically.
If I close it using the 'X' button and reconnect, I get in to same stuck screen. My only workaround is to login with Putty and type 'service vncserver restart'. Then I am able to connect again. But same thing happens when I do a logout.
I am using CentOS 5.2 with GRUB booting a software RAID configuration. The first disk is md0 and is mirrored across sda1 and sdb1.I manually re-installed grub using grub-install and the machine will no longer boot off of the HD. The grub menu comes up, I can select my kernel the machine then jumps to loading the initrd and hangs.It will go no further. I have a live DVD that can boot from the HD. If I use that to first boot from the DVD, then specifiy the HD, it shows the same grub menu and then the machine boots fine w/o the initrd hang.I have tried re-installing grub but not been able to get the machine to work again w/o the DVD.
View 3 Replies View RelatedI'm developing a simple TCP server. 99% of incoming connections terminate correctly and the sockets disappear from netstat outputHowever, a few connections hang around for indefinitely in the FIN_WAIT2 state. Now, I know that the clients in this case are misbehaving by not sending a FIN,ACK to close the connection. However, regardless of client behaviour, the connections should only remain in this state for a maximum of 60 seconds (set globally by /proc/sys/net/ipv4/tcp_fin_timeout)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name Timer
tcp 0 0 10.0.0.12:2000 10.0.0.6:50990 FIN_WAIT2
[code]....
I've installed CentOS 5.5 on my Acer Aspire One D150. It uses the Intel integrated graphics chip GM945 which isn't supported "out of the box" by CentOS. My screen resolution has defaulted to 800x600, but it should be 1024x600. tried xrandr, and editing the xorg.conf file, and now have gone down the rabbit hole of trying to install xf86-video-intel and its associated dependencies (nested like Russian matryoshka dolls). I'm at the point of trying to install xorg-server, but am getting hung up by its dependencies on xproto and fontsproto, despite having installed them.
View 5 Replies View Related