CentOS 5 :: Kernel Panic Under Load (x86_64)?

Jul 1, 2009

I suffered a kernel crash today - then noticed a newer kernel was available, so I updated to it.However, it's since crashed again! Here's the message - can anyone tell me what's going on, is this a known issue or is it bad hardware?

general protection fault: 0000 [1] SMP
last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
CPU 2

[code]....

View 1 Replies


ADVERTISEMENT

Ubuntu :: Panic At Kernel - Lucid Won't Load

Jun 6, 2010

I went to fire up Lucid this after noon and it gave me this error message. I didn't want to write all of that down so I took a picture. After several minutes it did nothing. I then decided to do a hard restart. This time it isn't giving a signal to the monitor. The monitor is less than half a year old, but I tried another. Still nothing. It show's no signal like it's not even hooked up to a machine. It doesn't even show the BIOS menu! I don't know if this is the cause or not but, I left my computer at my mothers house last night were they had a thunderstorm.

I have several applications like Virtual box and Mobloquer that took a hell of a long time to setup. Plus three guest operating systems, and some work that I didn't backup like videos. If we can get this up and running without re-installing.

View 5 Replies View Related

Ubuntu :: LTSP Kernel Panic - Nothing Seems To Load ?

Jul 18, 2010

I've installed LTSP on 10.04. I can get a couple of (fairly new) laptops to boot from this so all appears to be fine.

But my key goal is to get ASUS K8S-MX motherboard with sis 190 lan to boot so that I can set up a computer lab.

All seems to go well on boot but

When loading essential drivers, nothing seems to load and I get a done.

Then running /scripts/init-premount I get no interfaces found.

Then mounting root file system It starts Running /scripts/nfs-top and drops into kernel panic.

View 2 Replies View Related

CentOS 5 :: Kernel Panic Not Syncing No Init After Fresh Install Centos 5.3 Iscsi?

Jul 9, 2009

The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.

Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.

View 1 Replies View Related

CentOS 5 :: Kernel Panic During First Boot

May 21, 2009

I decided to try Linux recently. I downloaded CentOS-5.3-i386-bin-DVD.iso. Installation was successful but the OS reports Kernel Panic while booting. At first I can see messages:

Memory for crash kernel (0x0 to 0x0) notwithin permissible range
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not usin MMCONFIG

The OS continues to boot, but then shows kernel panic.

I tried to solve this problem during several days. I've installed the OS at least 10 times changing conditions. I tried x86-64 version, disabled PAE in BIOS, performed manual partitioning without LVM. The result is the same.

My PC has Intel Core 2 Duo E8400 CPU (no overclocking), 4GB RAM (DDR2-800), ATI 3470 GPU. Windows is working smoothly on it, I can encode video during several hours without problem. All fans are working, the system is not overheated. MemTest86 showed no errors.

I've installed CentOS on my laptop (Core 2 T5600 CPU, 2GB RAM, Intel G945 Video), it works nice, i like it very much.

For testing I've installed OpenSUSE 11.1 on the PC, everything is ok, I'm writing this message from it.

View 7 Replies View Related

CentOS 5 :: Kernel Panic During Installation?

Aug 19, 2010

i m trying to install Centos 5.5 on a x86_64 machine i use kickstat and cobbler but during the %pre script the installation failed with the following message

kernel panic ; not syncing nmi watchdog does someone what can be the cause of that?

Here is the beginning of my kickstart file with the pre part

url --url=http://cobbler.int-evry.fr/cblr/links/Centos-5.5-x86_64
# If any cobbler repo definitions were referenced in the kickstart profile, include them here.
repo --name=el5-x86_64-rpmfusionnonfree --baseurl=http://cobbler.int-evry.fr

[Code]....

View 1 Replies View Related

CentOS 5 :: Kernel Panic After 5.5 Upgrade?

Sep 19, 2010

Today I upgraded one of my computers with the following command

% yum upgrade

Before the upgrade the computer was running CentOS 5.3 with the versionlock plugin and kernel 2.6.18-128. The update went smoothly (no dependency problems).

If I try to reboot with the new kernel (2.6.18-194), I get the following:

Found volume group VolGroup00 using metadata type lvm2
2 logical groups in VolGroup00 now active
mount: error mounting /dev/root on /sysroot as ex3t: No such device
setuproot: moving /dev failed: No such file or directory

[Code].....

If I reboot with the previous kernel (2.6.18-128), everything is fine.

View 4 Replies View Related

Server :: Centos 4.8 (Vmware) Kernel Panic?

Mar 29, 2010

I have a Centos 4.8 linuxbox running in VMWare ESXi 4 and the kernel is 2.6.9-89.0.11.ELsmp. Recently, this linuxbox is quite unstable, it has kernel panic once a week... But we didn't have any configuration changes on it. And I have attached the kernel panic console screen and lsmod for the server.[URL]...

View 2 Replies View Related

CentOS 5 :: Raid-1 Fail With Kernel Panic?

Oct 4, 2009

I had been testing the this link Raid Setup

I can do this in the installation phase, no issue, but I have to know how to make it in a production server.

I follow, read and test the article 3 times without any success, went I try to boot my machine with the raid disk it show error about that cannot find my root "/dev/root"

mount: could not find filesystem '/dev/root'
...
setuproot : moving /dev failed: no such fie or directory
no fstab.sys

[Code]....

But I still don't know what I have done wrong, this is my 3rd time that I try this without any luck, I'm running Centos 5.3 updated. Both disk are the same size.

View 13 Replies View Related

CentOS 5 :: Kernel Panic After Fresh Install?

Jul 9, 2010

I installed CentOS 5.5 and after the install when the system reboot, it give me a kernel panic error saying that it don't find the drive /dev/sdb4. I didn't install Grub since Ubuntu is already present on the first drive. I let Grub2 OS prober install it in Grub menu. Here is the grub line:

menuentry "CentOS release 5.5 (Final) (on /dev/sdb4)" {
insmod ext2
set root='(hd1,4)'

[code]....

View 3 Replies View Related

CentOS 5 Hardware :: Kernel Panic During Boot From DVD?

Nov 12, 2010

During boot from CentOS5.4 DVD and after choose linux rescue mode, encounters with error:

Code: 8b 5e 04 83..... ........ 3d c0
EIP:[<c0417656>]__modify_IO_APIC_irq+0x40/0x62 SS:ESP 0068:df94eed4
<0> Kernel panic - not syncing : Fatal exception

View 3 Replies View Related

CentOS 5 :: Mondo: Kernel Panic Upon Restore?

Feb 21, 2011

I created a CD image of my CentOS installation using mondo. When I booted from this CD and, in the restore process, selected an option to test the integrity of the image, it got to a certain point and said: Failure to execute /init. Kernel panic - not syncing: No init found. Try passing init= option to kernel.The instructions say the kernel may need to be recompiled with certain options.Does anyone know if the CentOS kernel needs to be recompiled for use with mondo? If so, with exactly what options?I'm using CentOS 5.5. dmesg: Linux version 2.6.18-194.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat4.1.2-48)) #1 SMP Fri Apr 2 14:58:14 EDT 2010.

Unfortunately I don't remember exactly what command I used to test the integrity of the mondo image, and http:[url]....the source of the instructions, is currently down.

View 1 Replies View Related

CentOS 5 :: Kernel Panic - Disk From Array Failed

May 6, 2009

I have an old server based on Tyan Thunder LE-T (s2518UGN),: embeeded VGA - ATI Rage XL two Intel Pentium III (PGA370) processors at 1133 MHz 512 MB ECC RAM embeeded Dual Intel 82559 LAN controllers 10/100Mbps embeeded Adaptec 7899W NT Ultra160 SCSI Adaptec SCSI RAID 2000S (PCI card to support for bootable RAID 5) 3x Seagate HDD ST318438LW connected in RAID 5 instaled OS was RedHat 8 rack case (2U) It worked fine but one disk from array failed.

I provided backup and decided use two mirrored SATA disks Seagate ST3500320NS HDD ES.2 500GB with PCI SATA controler Kouwell KW-5125 (SiI3124 chipset) inserted through PCI riser card (2U case). (I can't replace old SCSI disk because it isn't available any more.) I disabled SCSI controler in BIOS and removed Adaptec SCSI RAID 2000S PCI card. I inserted PCI SATA controler connected both SATA disks and configured mirroring.

[Code]....

View 10 Replies View Related

CentOS 5 Hardware :: Install Kernel Panic Using G31m-s2l?

Sep 12, 2009

Hardware config as following:

MB: Gigabyte g31m-s2l
[URL]
CPU: Intel PD 2.8G
RAM: Kington DDR2 800 512Mx1
HDD: Seagate 80G IDE x 1

Tried to use all netinstall, DVD install, i386, x86_64 and install parameters (like linux text, noapic, nomsi, nousb etc) of CentOS 5.3 install disk, after press 'enter' to start install, it shown kernel panic error and the system halt. From the error message, i just found maybe some error related to 'Intel i915'.

But when use CentOS 4.6 install DVD, the installation can go smoothly and system run without any error (even can't find the lan card) After search past post, someone claimed that this motherboard can used to install CentOS 5.2. Does anyone had exp. on using the MB to install CentOS 5.3?

View 5 Replies View Related

CentOS 5 :: Insmod Error When Booting, Kernel Panic?

Sep 7, 2010

After a reboot, my PC just hang. It says "insmod : error inserting '/lib/raid456.ko : -1 File exists ..." then followed by a kernel panic. I have tried to boot using rescue mode but it couldn't find any Linux partition, thus no /mnt/sysimage was mounted. It left me at a shell and I'm stuck there.

View 3 Replies View Related

CentOS 5 Hardware :: ASUS P5KPL-AM Kernel Panic During New Installation?

Feb 12, 2009

I have PC with motherbord P5KPL-AM (latest ver. BIOS), and i want installation CentOS 5.2.But can't screen attaching....

View 5 Replies View Related

CentOS 5 :: Kernel Panic After Update - Not Syncing Fatal Exception

Apr 2, 2009

After update to 5.3 and reboot I got this error. googling for it I found that it is a known bug in kernel REHL 5.3 and there is also a patch for it [URL]. I am very new to linux, so how to apply, or just wait for a new kernel?

View 4 Replies View Related

CentOS 5 :: Tablet PC - New Install From DOS Floppy - Kernel Panic Hang

Apr 15, 2009

I recently bought a Toshiba Portege M200 tablet PC and it's caused me no end of grief to load linux on it. I would like to load CentOS 5.x (because my hosting company uses it and I will be able to learn as I run it).

Here are my resources:

I found internet resources to create a boot disk that enables me to see my 8GB Sony USB flash drive via DOS. It works nicely.

I have a laptop drive to USB converter and can access the hard drive directly from my Win XP desktop. I have PowerQuest's Partition Magic Pro (v8.0) and can make Ext2 and Ext3 partitions at will. I have also loaded a program that allows Windows XP to read and write from Ext2 and Ext3. It works well.

I have tried loading boot images from PXE. This option is mostly out because it seems to be a couple levels past my competency (I haven't been able to get it to work).

Given those resources, what's the best way to load either the CentOS live CD... or some other approach?

Since I wrote this, I figured out how to make a boot floppy that can start an external USB CD-ROM/DVD drive. Here are the files on the floppy:

Here's the contents of my config.sys:

Here's the contents of my autoexec.com:

I can boot to the CD and launch linld.com. The problem is that I keep getting a kernal panic message, saying that a memory block could not be addressed. And when I add the following part to the line above: "initrd=d:isolinuxinitrd.img" the install fails and reboots. I have tried to expand the initrd.img and it appears... blank?

View 13 Replies View Related

CentOS 5 Hardware :: Panic Kernel Graphic Card Nvidia?

Aug 16, 2009

i have a problem with my graphic card when i put in my PC and start on my PC, i have panic kernel i give you the message

View 2 Replies View Related

CentOS 5 :: Kernel Panic Creating LVM Snapshot Of Root Fs Volume

Oct 29, 2009

I can cause the kernel to panic immediately with the following command. lvcreate --snapshot --name Snap --extents 100%FREE VolGroup00/LogVol00 The last line of the panic message is "<0>Kernel panic - not syncing: Fatal exception" If I create a snapshot of any other volume it works just fine. It only panics on LogVol00 which is my root fs.

I'm running 5.4 after update from 5.3. It didn't work with 5.3 either. This is a 32-bit guest running in VMWare Server 2.0.1 which is running on FC10 x86_64. I've tried the guest in both UP and SMP (2 cores) modes and observed no difference.

View 2 Replies View Related

CentOS 5 :: Kernel Panic - Not Syncing : Attempted To Kill Init?

Jan 15, 2010

I am getting :

exec of init (/sbin/init) failed!!! : 2
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init! My server is at remote end which I access through Public IP.

View 5 Replies View Related

CentOS 5 :: EXT3-fs: Unable To Read Superblock And Kernel Panic

Aug 15, 2011

I got a CentOS server + KDE from a server (which I had no contact until now), he had 2 HD's one for the system and another for files.

I brought the HD system home to try to make it run on a virual machine (VMware) so I can do some testing before you put in practice.

But already converted the VMware HD to the system, it tries to start but it shows some errors and in a message "kernel panic - not syncing: attemped to kill init"

I think the drivers are correct, has edited the file "/ etc / modprobe.conf" edited these entries equal to another I installed CentOS on VMware.

alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptspi
ata_piix alias scsi_hostadapter2

Look at the picture attached the full error.

Link to large image
Link to large image

View 1 Replies View Related

CentOS 5 :: Vmware Dosn't Work With This Kernel 2.6.18-164.15.1.el5.028stab068.9-x86_64?

Jun 22, 2010

i have lot of google search and make lot of suggestion found in google but without any solving for the problem. try to install vmware workstation any verion on my vps which have openvz and kernel 2.6.18-164.15.1.el5.028stab068.9-x86_64 when try to install for exampil vmware workstation 5.5.3 found this problem

root@server [~]# vmware-config.pl
Making sure services for VMware Workstation are stopped.
Stopping VMware services:
Virtual machine monitor [ OK ]
Configuring fallback GTK+ 2.4 libraries.
In which directory do you want to install the mime type icons?
[/usr/share/icons]

[Code]...

View 4 Replies View Related

CentOS 5 :: Kernel Panic - Not Syncing - Fatal Exception - Smp_call Function

Aug 4, 2010

I have a situation where there are no logs in /var/log/messages and this has happened the second time during two weeks.

Snapshot of the screen was taken when this happened and the server was restarted. Since it's a time sensitive matter.

Snapshot:[url]

View 8 Replies View Related

CentOS 5 :: Custom Kernel Panic - Not Syncing: Attempted To Kill Init?

Apr 5, 2011

I got the following error after compiling kernel version 2.6.38.2 from sources with this Howto:[URL].. Creating root device.

Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults

[Code]...

View 2 Replies View Related

CentOS 5 :: Kernel Panic Unrecognized Mount Option "mand"?

Apr 10, 2011

After upgrading from 2.6.18-194.32.1.el5 to 2.6.18-238.5.1.el5 EXT3-fs: Unrecognized mount option "mand" or missing value

View 1 Replies View Related

CentOS 5 :: "Kernel Panic Not Syncing : Fatal Exception" BUG

Aug 28, 2009

I've just installed for the first time Centos 5.3 on my machine. everything goes in harmony except : 1-when I power off, everything seem to be terminated smoothly but at last I get this annoying error "kernel panic not syncing : fatal exception" 2-my Ethernet card won't get operational; its detected already but when I try to activate it I get this error " eth0 seems not to be present. Initialization delayed"

System Information:

System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: 965P-DS3
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2 CPUs), ~2.4GHz

[code]...

View 9 Replies View Related

CentOS 5 Hardware :: Compaq CQ60-206 - Machine Check Exception" Followed By A "Kernel Panic

Apr 28, 2009

First off let me say thanks psy_unix and fuji, the pci=nomsi allowed me actually finish install on my laptop. (Read this post)

Problems do not stop here however...Now, when it reboots after install all I get is a "Machine Check Exception" followed by a "Kernel Panic". I had to switch back to Vista Home finally (not happy about that).

I just bought it and it runs happily under Vista, I just don't run happily under Vista.

How to get CentOS running on this one?

Information:

Laptop:
Compaq CQ60-206US
CPU: AMD Athlon X2 64 bit (2Ghz Dual Core)
Mem: 2 GB
OS: CentOS 5.3 (tried 32 and 64 bit)

I have also tried CentOS 5.2 (32 and 64 bit) with the same results.

View 19 Replies View Related

CentOS 5 :: Stuck With 2.6.18-92.el5 Kernel - Doesn't Load

Feb 7, 2010

I am stuck with 2.6.18-92.el5 kernel for a long time now. My centos doesn't want to load any other kernel. Seems like it doesn't read grub.conf file on reboot. Here is my grub.conf

[Code]....

View 14 Replies View Related

General :: Kernel Panic In 64bit Arch Linux After Kernel Recompile - 2.6.35-rc3

Jun 15, 2010

I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.

Running Arch Linux 64bit, most recent version.

Kernel Output:

Code:

My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved