root@vz03i106 [~]# yum groupinstall "X Window System" "GNOME Desktop Environment"
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* addons: centosk2.centos.org
[code]....
ok I am using a customized CentOS distro that is looking for 3 network cards on boot. eth0, eth1, eth2. I do not need eth0 and need to bridge it to eth1.
View 1 Replies View RelatedI've got two USB webcams I'm trying to get running with CentOS 5.4 x86_64. I've downloaded and installed the gspca driver from http://mxhaard.free.fr/spca5xx.html. Running lsusb yields:
Bus 002 Device 003: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
Bus 002 Device 002: ID 0ac8:307b Z-Star Microelectronics Corp. USB 1.1 Webcam
I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies View Relatedi wanna ask if it's possible to install centos on hard2 while am running centos on hard1 then after installation is complete boot from the second hard drive. i dont have physical access to the server, all i can is connect to it through SSH. so is it possible to install centos on the second hard drive from CLI! then boot from it?
View 1 Replies View RelatedI have a Dell E5400 laptop running parallels with guest OS of CentOS 5.4. My problem is when I'm connected via Ethernet all connections are good. When I go wireless, CentOS is dead via network connections. Now according to Dell, I have a DELL 1397 mini card as my wireless card. Searches on the web state that the dell 1397 is another name for Broadcom 43xx wireless card. So after following any information I retrieved from the forum on trying to get the wireless connection up, I'm still having problems. Here is the latest error trying to build a driver using the hybrid_wl software from broadcom:
make -C /lib/modules/`uname -r`/build M=`pwd`
make: Entering directory `/usr/src/kernels/2.6.18-164.15.1.el5-i686'
CC [M] /usr/local/src/hybrid_wl/src/shared/linux_osl.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_linux.o
CC [M] /usr/local/src/hybrid_wl/src/wl/sys/wl_iw.o
[Code]...
I am running a CentOS 5.5 system which does NOT support VT Technology, so I am unable to use Xen HV. I am very happy with OpenVZ other than the fact that it doesn't support Windows, only Linux.I'd like to have VMWare Server 2.x installed, but it appears that OpenVZ changes the Kernel to, in my case, 2.6.18-194.3.1.el5.028stab069.6. The default kernel on my system is 2.6.18-194.3.1.el5.i386.If I change grub to load 2.6.18-194.3.1.el5.i386, VMWare will work but OpenVZ will not. If I change grub to load 2.6.18-194.3.1.el5.028stab069.6, OpenVZ will work, but VMWare will not.If I try to run /usr/bin/vmware-config.pl while in the 2.6.18-194.3.1.el5.028stab069.6 kernel, I get an error of:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)?Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel?[/usr/ src/ linux/ include]I'm so lost as what to do now..is there anyway I can compile both of the kernels together somehow?
I managed to install xdebug from pecl, using the php-pear package from Centos base.
However, when trying to install PHPUnit i get an error saying I need at least PEAR >= 1.8.x
Has anyone managed to get a later version of PEAR running on Centos please?
I have seen that is possible to boot from a USB stick and use a USB memory as hard drive.I have a server enable to hold 6 sata drives 3.5", But I want to use the 6 drives and make a Raid-5 setup for backups 5 -1 spare. /boot cannot be on a raid-5 level 0 or 1. But I want to have redundancy for my OS, them I can install Centos on a Raid-1 using 2 disk, which let me only 4 for the raid 5. I will run a backup I want to have a lot of space.
Using 4 disk for raid-5 2 TB I will have 6TB no spare, no spare is not a good option at least I will prefer 1 spare.Well, I was thinking, the server MoBo have USB support, if I open the box I can see the small entrances, If Centos let me installed on a USB memory drive, can I trust a USB memory stick?t night with bacula.
I have Centos 5.3 on our server When I log-in in webmin I have a message "Warning - Your system is actually running CentOS Linux version 5.3." In the next line I have a button "Update Detected Operating System" My question is Do I need to click the link and update Detected operating system? If I do, is it going to change any configuration on our server?
View 2 Replies View RelatedI'm actually running Centos but I don't see a Centos forum yum stanza/url for the source repository please?
View 3 Replies View RelatedI had recently installed centos 5.5 on Distro.But I am not getting how to see interface.
I tried ifconfig and ipconfig both are not working.So please let me know what is command to see interface.
I've installed (well, I founded it installed yet in my new job...) Centos 5.3 (Final) version (kernel 2.6.18-164.el5 on an x86_64), but I only can work fron the command line. I don't know if I can use any graphical interface (I've worked with SuSe years ago and it start its graphical interface automaticaly when you reboot the system).
I have to configure sendmail. For it, I download and installed webmin and usermin and start them, but I don't know how to continue...
i'v installed centos 5.4 on vmware, but their is no graphic interface so i try: yum groupinstall "Gnome Desktop Environement" "X window System" but it says no packages in any requested group available to install or update the commande: yum grouplist gives me Trixboxcore actually avery time i try to do a yum install <package> it returns no package <available>
View 4 Replies View RelatedI have my centos server behind a Linksys router. I'd like to access the router's web interface to open and close certain ports. How do I access the router's interface ?
Prior to this, I had a windows machine. I could type in the router's IP in 192.168.1.1 in the browser and get access to the interface.
How do I go about now ?
At my work, we have several clients (outside clients) that have an FTP login to our FTP Server. Their login then leads them to their home FTP folder. The FTP server is currently a Win2003 box. Because we have so many clients, we would like to implement some form of WebGui that would allow each client to manage their own FTP home folder and user info, such as resetting their password if they lost it.
Is there anything like this available in linux that would provide us with that kind of control/usability?
I have tryed for hours trying to get this right but failed.I configure the dhcp file and when accepting the changes i get the error NOT CONFIGURED TO LISTEN ON ANY INTERFACE.
My file looks like this
Heres my current settings
I am getting an error: NOT CONFIGURED TO LISTEN ON ANY INTERFACE
Is there a graphical interface for centos 5.3
View 3 Replies View RelatedI have a webserver with 3 virtual interfaces named eth0:1 eth0:3 and eth0:3. Until yesterday all the virtual ip's worked but eth0:1 decided that it just won't work anymore since yesterday. The configs are:
eth0
Code:
DEVICE=eth0
USERCTL=no
ONBOOT=yes
BOOTPROTO=none
BROADCAST=xx.xxx.26.190
NETWORK=xx.xxx.26.160
NETMASK=255.255.255.224
IPADDR=xx.xxx.26.174
GATEWAY=xx.xxx.26.161
eth0:1
Code:
MTU=""
NETMASK=255.255.255.224
ONPARENT=yes
BROADCAST=xx.xxx.26.191
BOOTPROTO=none
NAME=""
IPADDR=xx.xxx.26.175
NETWORK=xx.xxx.26.160
ONBOOT=yes
DEVICE=eth0:1
eth0:3
Code:
MTU=""
NETMASK=255.255.255.224
ONPARENT=yes
BROADCAST=xx.xxx.26.191
BOOTPROTO=none
NAME=""
IPADDR=xx.xxx.26.182
NETWORK=xx.xxx.26.160
ONBOOT=yes
DEVICE=eth0:3
eth0:4
Code:
MTU=""
NETMASK=255.255.255.224
ONPARENT=yes
BROADCAST=xx.xxx.26.191
BOOTPROTO=none
NAME=""
IPADDR=xx.xxx.26.187
NETWORK=xx.xxx.26.160
ONBOOT=yes
DEVICE=eth0:4
route-eth0
Code:
ADDRESS0=0.0.0.0
NETMASK0=0.0.0.0
GATEWAY0=xx.xxx.26.161
eth0:3 and eth0:4 still work, but 2 doesn't
i have a centos box with interfaces eth0 and lo:0. i want to write a script to stop or start lo:0 automatically when eth0 comes down or up.
View 2 Replies View RelatedI took the hard drive from my server and put it into another machine to install centos with, as the server does not have a working CD drive. So now the situation is that x refuses to start when centos boots. I get a message saying:
Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose the problem?
I have an Asterisk-server with 2 interfaces, a WAN-interface (eth1) and a LAN-interface (eth0).
SETUP :
IAX-provider(internet) --> firewall --> Asterisk-server --> switch --> clients_on_LAN
So everything coming from the IAX-provider on port 4569 is forwarded to the Asterisk-server's WAN-interface (eth1).
This needs then be routed to an internal SIP-phone (an IVR-system will define which one) via eth0.
When a call is initiated from an internal SIP-phone (they register to the IP-address assigned to eth0) it needs to be routed via eth1 to the gateway (192.168.4.250). Asterisk will setup an IAX-channel on WAN-interface (eth1) to the IAX-provider (via gateway).
So... will this work :
route add -net ip_IAXprovider netmask 255.255.255.0 gw 192.168.4.250 dev eth1
I want to install a lineage 2 server on a vps... I have bought it and I have receiver connection details with ssh -.- . It's possible to install graphics interface from bash line because I don't know to set up a l2 server from bash line...
View 9 Replies View RelatedHow to figure out why there are errors on bond0(eth0)
Transfer speed is in KB
is there any graphical interface for installing programs in linux. Like installers in windows? or it is possible only through terminal?is there experience notes how to install things in linux? after i download something i am completely lost what to do next and how to check if this version is sutable for my version of linux etc. Trying to search internet gives nothing. Also I have this problem that my resolution is too high. so fonts are to small i cannot spend time in linux because my eyes start hurting. I use GNOMEThere are resolutions like 1280 x 960 next is 1440 x 900 1440x900 is sutable for my form of monitor.But 1280 960 is for more square like monitore so if i choose this resolution it looks bad. if i choose 1440 its too little. As it is max resolution for my monitor.In windows i use resolution 1280 x 768 how can i setup that in linux. Also in driver or something it says Ati 3600 series. But i have Ati radeon HD 3730 when i try to choose different versions of ... it says cannot start x server.
View 4 Replies View RelatedLooking at my logs note that the eth1 interface falls and rises many times.
.....
Jul 30 04:29:42 localhost kernel: e1000e: eth1 NIC Link is Down
Jul 30 04:29:44 localhost kernel: e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[code]....
I am some LinuxUNIX history but still consider my self a newbie.I know Microsoft OS well and am more comfortable with that but willing to learn Linux as well.I have a CentOS 5.5 Server I am using to Host over 18 other sites with a PERL / Web based application.The application and hosting are still working but since the CentOS updates I ran this morning my Session (I think that is the correct word) will only load a black desktop with the top menu bar only having the terminal icon and the bottom having a desktop icon; whereas prior to this update the default CentOS blue backdrop with white flower pattern and Applications, Places, System with the terminal icon and other icons displayed and the clock was off to the right.I think this is the Gnome GUI?
Also On Friday 6-24-11 I added a device line to the /etc/fstab so that my CD/DVD device would load up at boat time. I would not think this to be causing the problem.Please advise me on how to get back my regular GUI interface for this Desktop.
Centos el5xen x86_64 in a company network, novell-netware, Static IP I have several issues with the Xen network configuration. This configuration worked before, and was maded by a other personn with a higher level in centos and network . I'm trying to re-install xen in bridging mode.
1) The dom0 ping in the company network, but can't acess to the Internet.
I de-activated firewall, iptables and SE-Linux for the test.
the ifconfig-a command return
eth0
lo
sit0 (IPV6 encapsuled in IPV4)
vif0
vnet0
but no Peth0 Physical device
Is it normal and how can i repare this ?
Just setup 5.5 as Server-GUI installation last night. Ran latest updates today; it requested a restart; logged in to console; GUI desktop all looked normal at first, except that the panels on top and bottom are empty, except for the menu "Applications Places System" items (upper left) are there, but non-functional. The desktop icons for "Computer, Home, Trash" are functional. Update as I am writing this: The menu header items are now GONE as well, but icons still work (but don't help me).
Problem is, I don't have access to any apps that will allow me to reboot the machine with access to "Shutdown/Restart". If I hit the reset button, will it be OK? Or will it blow up like a Windows machine? Luckily I can reinstall if necessary, but the update thing might crash me again. All was fine before applying updates. Anybody having problems with the latest updates?
I'm using CENTOS 5.5 and I want to connect to internet using 2 pppoe accounts same ISP and i have a sigle NIC eth0.I used adsl-setup to create pppoe connections, 1 is ppp0 and second is ppp1. When i use /sbin/ifup ppp0 it works, i can use the internet, but when i try to use /sbin/ifup ppp1 while ppp0 is connected, nothing happens, i did ifconfig and there is only ppp0 showing.I'm a BIG NEWBIE of linux, i need to know step by step how to make this work, i heard something about a virtual network... but nothing clear.
View 7 Replies View Related